Upload Button Icon Add office photos

Filter interviews by

Gulf Asia Contracting Tower Crane Operator Interview Questions and Answers

Updated 11 Oct 2022

Gulf Asia Contracting Tower Crane Operator Interview Experiences

1 interview found

I applied via Approached by Company and was interviewed before Oct 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(3 Questions)

  • Q1. 1.5 round lagat hota hai
  • Q2. Or koi may 2.5 round hota hai
  • Q3. Aap ham ko call kar sakte hai XXXXX7

Interview Preparation Tips

Interview preparation tips for other job seekers - May dubai me gulf asia company me tower caren operator hu or abhi India me tower Caren chala na chahata hu

Interview questions from similar companies

Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. Yes I am interested
  • Q2. How much length jib
  • Ans. 

    The length of the jib on a tower crane varies depending on the specific model and job requirements.

    • The length of the jib can range from 30 meters to over 80 meters.

    • The length of the jib is typically specified in the crane's technical specifications.

    • The longer the jib, the greater the reach and lifting capacity of the crane.

    • Different jobs may require different jib lengths to reach specific heights or distances.

  • Answered by AI
Round 2 - Technical 

(4 Questions)

  • Q1. What's A f.t.c.and g.t.c
  • Ans. 

    F.T.C. stands for Free to Climb and G.T.C. stands for Ground to Cab. They are safety procedures for tower crane operators.

    • F.T.C. (Free to Climb) means the crane operator is free to climb up the tower crane to access the cab.

    • G.T.C. (Ground to Cab) means the crane operator must access the cab from the ground level using the designated access ladder or stairs.

    • These safety procedures help ensure that the crane operator saf...

  • Answered by AI
  • Q2. What is a sefty divaice
  • Ans. 

    A safety device is a mechanism or system designed to prevent accidents or injuries in the workplace.

    • Safety devices can include things like guardrails, harnesses, emergency stop buttons, and warning alarms.

    • These devices are essential for protecting workers and preventing accidents on construction sites.

    • For example, a fall arrest system is a safety device used to prevent workers from falling while working at heights.

  • Answered by AI
  • Q3. What what sefty divaice
  • Ans. 

    Safety devices on a tower crane include limit switches, overload sensors, anti-collision systems, and emergency stop buttons.

    • Limit switches are used to prevent the crane from moving beyond certain limits.

    • Overload sensors alert operators when the crane is carrying too much weight.

    • Anti-collision systems help prevent accidents by detecting nearby objects or other cranes.

    • Emergency stop buttons allow operators to quickly st

  • Answered by AI
  • Q4. How much tone use crane
  • Ans. 

    The tone of the crane is determined by the operator's communication with hand signals or radio.

    • The tone of the crane is typically communicated through hand signals or radio communication.

    • The operator must be able to understand and respond to the tone set by the signaler or supervisor.

    • Clear and effective communication is essential to ensure the safe and efficient operation of the crane.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I am Anup jana TOWER CRANE and gantry crane oprator I am from Kolkata digha West Bengal 10 years experience
Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Oct 2024. There were 4 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Eot crane full form
  • Ans. 

    EOT crane stands for Electric Overhead Traveling crane, which is a type of crane used for lifting and moving heavy loads in industrial settings.

    • EOT crane is commonly used in factories, warehouses, and construction sites.

    • It is operated using electricity for lifting and moving heavy objects.

    • EOT cranes are equipped with a hoist, trolley, and bridge for efficient material handling.

    • Examples of EOT crane manufacturers includ

  • Answered by AI
  • Q2. Eot crane safety
  • Ans. 

    Light/hooter Runing time mobile phone not use

  • Answered Anonymously
Round 2 - HR 

(2 Questions)

  • Q1. Limit kitna prakar ka hai
  • Ans. 

    2prakar gravit/rotary

  • Answered Anonymously
  • Q2. Uska name kya hai
Round 3 - Technical 

(1 Question)

  • Q1. DSL ka full form
  • Ans. 

    Digital Subscriber Line

    • DSL stands for Digital Subscriber Line

    • It is a type of technology that provides internet access through telephone lines

    • DSL allows for faster internet speeds compared to traditional dial-up connections

  • Answered by AI
Round 4 - Technical 

(1 Question)

  • Q1. Crane ka safety kya hai

Interview Preparation Tips

Interview preparation tips for other job seekers - I am Suraj Rout EOT Crane operator
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Apr 2023. There was 1 interview round.

Round 1 - Group Discussion 

Shift beginning While operating crane . Ist we discussed with incharge and line operator and rigger..

Interview Preparation Tips

Interview preparation tips for other job seekers - When we started the shift work . Ist we discussed with incharge and line operator and rigger . About work and safety and near miss accident. And good operating signal. And good communication...
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. Yes I am interested
  • Q2. How much length jib
  • Ans. 

    The length of the jib on a tower crane varies depending on the specific model and job requirements.

    • The length of the jib can range from 30 meters to over 80 meters.

    • The length of the jib is typically specified in the crane's technical specifications.

    • The longer the jib, the greater the reach and lifting capacity of the crane.

    • Different jobs may require different jib lengths to reach specific heights or distances.

  • Answered by AI
Round 2 - Technical 

(4 Questions)

  • Q1. What's A f.t.c.and g.t.c
  • Ans. 

    F.T.C. stands for Free to Climb and G.T.C. stands for Ground to Cab. They are safety procedures for tower crane operators.

    • F.T.C. (Free to Climb) means the crane operator is free to climb up the tower crane to access the cab.

    • G.T.C. (Ground to Cab) means the crane operator must access the cab from the ground level using the designated access ladder or stairs.

    • These safety procedures help ensure that the crane operator saf...

  • Answered by AI
  • Q2. What is a sefty divaice
  • Ans. 

    A safety device is a mechanism or system designed to prevent accidents or injuries in the workplace.

    • Safety devices can include things like guardrails, harnesses, emergency stop buttons, and warning alarms.

    • These devices are essential for protecting workers and preventing accidents on construction sites.

    • For example, a fall arrest system is a safety device used to prevent workers from falling while working at heights.

  • Answered by AI
  • Q3. What what sefty divaice
  • Ans. 

    Safety devices on a tower crane include limit switches, overload sensors, anti-collision systems, and emergency stop buttons.

    • Limit switches are used to prevent the crane from moving beyond certain limits.

    • Overload sensors alert operators when the crane is carrying too much weight.

    • Anti-collision systems help prevent accidents by detecting nearby objects or other cranes.

    • Emergency stop buttons allow operators to quickly st

  • Answered by AI
  • Q4. How much tone use crane
  • Ans. 

    The tone of the crane is determined by the operator's communication with hand signals or radio.

    • The tone of the crane is typically communicated through hand signals or radio communication.

    • The operator must be able to understand and respond to the tone set by the signaler or supervisor.

    • Clear and effective communication is essential to ensure the safe and efficient operation of the crane.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I am Anup jana TOWER CRANE and gantry crane oprator I am from Kolkata digha West Bengal 10 years experience
Interview experience
4
Good
Difficulty level
-
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Jun 2021. There was 1 interview round.

Round 1 - One-on-one 

(5 Questions)

  • Q1. DSL full from LT full from
  • Ans. 

    This question seems to be related to electrical or technical terminology.

    • The question may be asking about the status of a DSL (Digital Subscriber Line) connection being full from a LT (Local Terminal) connection being full.

    • It could be related to network or internet connectivity issues.

    • The question may be seeking troubleshooting steps or solutions for resolving the issue.

  • Answered by AI
  • Q2. Eot crane safety
  • Q3. Eot crane c t full from
  • Ans. 

    The question seems to be asking about the full capacity of an EOT crane.

    • EOT crane refers to Electric Overhead Traveling crane, which is used for lifting and moving heavy loads.

    • The 'c t full' likely refers to the full capacity of the crane, which is the maximum weight it can lift safely.

    • To determine the full capacity of an EOT crane, you need to consider factors like the type of crane, its design specifications, and any...

  • Answered by AI
  • Q4. Crane capacity tank capacity
  • Q5. Limit switch crane

Interview Preparation Tips

Topics to prepare for Tata Steel Overhead Crane Operator interview:
  • EOT Cranes
Interview preparation tips for other job seekers - Cran opratar
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed in Jan 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. Eot full form kya he
  • Ans. 

    EOT stands for Electric Overhead Traveling crane, which is a type of crane used for lifting and moving heavy loads in industrial settings.

    • EOT stands for Electric Overhead Traveling crane

    • It is commonly used in industrial settings for lifting and moving heavy loads

    • EOT cranes are operated using electricity for smooth and efficient operation

  • Answered by AI
  • Q2. Electric overhead traveling
  • Q3. What limit switch
  • Ans. 

    Limit switches are safety devices used to prevent the crane from overtraveling or overloading.

    • Limit switches are installed on cranes to set boundaries for the crane's movement.

    • They are used to prevent the crane from overtraveling in any direction.

    • Limit switches can also be used to prevent overloading by stopping the crane when it reaches a certain weight limit.

    • Common types of limit switches include lever-operated, push

  • Answered by AI
  • Q4. A limit switch is an electromechanical device operator by a physical force applied to it by an object. Limit switches are used to detect the presence or absence of an object. These switches were originally...
  • Q5. Safety kya hai crane ka
  • Ans. Crane ka light. Crane ka hooter. Crane ka beack. Crane ka limit switch. Crane ka emergency switch
  • Answered Anonymously
Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jan 2024. There were 2 interview rounds.

Round 1 - Technical 

(4 Questions)

  • Q1. What limit switch
  • Ans. 

    A limit switch is a device used in cranes to control the movement and prevent overtravel.

    • Limit switches are used to set boundaries for the crane's movement.

    • They are typically placed at the ends of the crane's travel path.

    • When the crane reaches a limit switch, it triggers a signal to stop or change direction.

    • Limit switches help prevent accidents and damage by preventing the crane from overtraveling.

    • Examples of limit swi...

  • Answered by AI
  • Q2. Eot full form kya hai
  • Q3. Aux full form kya hai
  • Q4. What is the rotary & gravity
  • Ans. 

    Rotary and gravity are concepts related to the operation of cranes.

    • Rotary refers to the ability of a crane to rotate or swivel horizontally.

    • Gravity refers to the force that pulls objects towards the center of the earth.

    • In the context of crane operation, rotary is used to position the crane's boom and load in different directions.

    • Gravity plays a crucial role in crane operation as it determines the stability and balance ...

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. Sefty kya hai Crane ka
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(8 Questions)

  • Q1. I have a best opretor
  • Q2. Thanqu for operator overhead
  • Ans. 

    An overhead crane operator is responsible for operating and controlling overhead cranes to lift, move, and position heavy loads.

    • Operate and control overhead cranes

    • Lift, move, and position heavy loads

    • Ensure safety protocols are followed

    • Inspect and maintain equipment

    • Communicate with team members and follow instructions

  • Answered by AI
  • Q3. For overhead crane operator in India from hindalco industries Ltd
  • Q4. Ghujavsjsbsnsbsjsnwbshhsb
  • Q5. Hsishsbzjsaknbsydush
  • Q6. Bsnjajbsbnsnzkknannnnbh
  • Q7. Yhajsnsbsjxbsjkk ok nsnsn
  • Q8. Hnsksbslmnbsmwmksjnsnn

Interview Preparation Tips

Interview preparation tips for other job seekers - Overhead crane operator in u p renukoot in hindalco industries Ltd
Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Dec 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Eot full form kya hai

Gulf Asia Contracting Interview FAQs

How many rounds are there in Gulf Asia Contracting Tower Crane Operator interview?
Gulf Asia Contracting interview process usually has 2 rounds. The most common rounds in the Gulf Asia Contracting interview process are Resume Shortlist and One-on-one Round.
What are the top questions asked in Gulf Asia Contracting Tower Crane Operator interview?

Some of the top questions asked at the Gulf Asia Contracting Tower Crane Operator interview -

  1. Aap ham ko call kar sakte hai XXX...read more
  2. Or koi may 2.5 round hota ...read more
  3. 1.5 round lagat hota ...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Tata Steel Interview Questions
4.1
 • 836 Interviews
Tata Projects Interview Questions
4.2
 • 422 Interviews
S&P Global Interview Questions
4.1
 • 276 Interviews
TCE Interview Questions
3.8
 • 246 Interviews
Cummins Interview Questions
4.3
 • 231 Interviews
View all

Fast track your campus placements

View all

Gulf Asia Contracting Tower Crane Operator Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

5.0

Salary

5.0

Job security

5.0

Company culture

5.0

Promotions

5.0

Work satisfaction

Explore 1 Review and Rating
HSE Officer
16 salaries
unlock blur

₹5 L/yr - ₹12.1 L/yr

Safety Officer
12 salaries
unlock blur

₹9.6 L/yr - ₹12.3 L/yr

Quantity Surveyor
8 salaries
unlock blur

₹4.8 L/yr - ₹16 L/yr

Planning Engineer
8 salaries
unlock blur

₹6.8 L/yr - ₹18 L/yr

Piping Supervisor
6 salaries
unlock blur

₹8 L/yr - ₹20 L/yr

Explore more salaries
Compare Gulf Asia Contracting with

Larsen & Toubro Limited

4.0
Compare

Shapoorji Pallonji Group

4.1
Compare

Tata Projects

4.2
Compare

Hindustan Construction Company

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview