Upload Button Icon Add office photos

Filter interviews by

Gulf Asia Contracting QC Inspector Instrumentation Interview Questions and Answers

Updated 14 Sep 2022

Gulf Asia Contracting QC Inspector Instrumentation Interview Experiences

1 interview found

I applied via Walk-in

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

My name is Mohammad Naushad Alam as a Instrumentation QA/QC Inspector.I was worked done all types Devices Calibration and Control Valve & PSV testing witnesses with client at Rastanura refinery fuel and clean perfect.
With regards,
Mohammad Naushad Alam

Interview Preparation Tips

Interview preparation tips for other job seekers - Witness of All type devices calibration at Approved Calibration shop .
Witness of All type Devices Installation at project .
Witness of All type Instrument cable megger testing at Laydown

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(3 Questions)

  • Q1. What is this company facility
  • Q2. This company give free food
  • Q3. This company give travelling also
Round 2 - Technical 

(2 Questions)

  • Q1. This company where is working
  • Q2. I need to India and out of country also work

Interview Preparation Tips

Interview preparation tips for other job seekers - I am Arun Prasad gound
I am instrument technician
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Dec 2023. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. Ritik Kumar Maurya
  • Q2. Indian oil corporation limited Panipat
  • Q3. One year apprentice training in Instrumentation and control
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Instrument question
  • Q2. Pt,rtd, vibration, other
Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Job Fair and was interviewed in Feb 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(6 Questions)

  • Q1. Any instrumentation equipment explain
  • Ans. 

    Instrumentation equipment refers to devices used to measure, control, and monitor various parameters in industrial processes.

    • Instruments like pressure gauges, flow meters, and temperature sensors are commonly used in instrumentation.

    • Control valves and actuators are used to regulate the flow of fluids or gases.

    • Programmable Logic Controllers (PLCs) are used for automation and control of processes.

    • Analytical instruments l...

  • Answered by AI
  • Q2. PLC and scada and DCS
  • Q3. PLC panel wiring diagram
  • Ans. 

    A PLC panel wiring diagram is a visual representation of the electrical connections and components in a programmable logic controller panel.

    • A PLC panel wiring diagram shows the layout and connections of various components such as power supplies, input/output modules, relays, and sensors.

    • It helps technicians understand how the electrical signals flow within the panel and how different devices are interconnected.

    • The diag...

  • Answered by AI
  • Q4. What is the control valve
  • Ans. 

    A control valve is a device used to regulate the flow of fluid or gas in a process system.

    • Control valves are commonly used in industries such as oil and gas, chemical, and power plants.

    • They can be operated manually or automatically through an electrical or pneumatic signal.

    • Control valves consist of a valve body, actuator, and positioner.

    • They can control variables such as flow rate, pressure, temperature, and level.

    • Exam...

  • Answered by AI
  • Q5. What is the transmitter
  • Ans. 

    A transmitter is a device used in instrumentation to convert a physical measurement into an electrical signal.

    • Transmitters are commonly used in industries such as oil and gas, chemical, and power plants.

    • They are used to measure variables such as pressure, temperature, flow rate, level, and pH.

    • Transmitters typically consist of a sensing element, signal conditioning circuitry, and an output signal.

    • The sensing element det...

  • Answered by AI
  • Q6. What is the flow meters
  • Ans. 

    Flow meters are devices used to measure the flow rate of a fluid or gas.

    • Flow meters are commonly used in industries such as oil and gas, water treatment, and manufacturing.

    • They can measure flow rates in various units such as liters per minute, cubic meters per hour, or gallons per minute.

    • Different types of flow meters include electromagnetic, ultrasonic, turbine, and differential pressure flow meters.

    • Flow meters can be...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Technical skills and programming had checked-in scada

Skills evaluated in this interview

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - One-on-one 

(5 Questions)

  • Q1. Instructions technician
  • Ans. Instrument technician is tempreture flow megarment pressure
  • Answered Anonymously
  • Q2. Instructions questions
  • Q3. What is a thermocouple?
  • Ans. 

    A thermocouple is a temperature sensor that consists of two different metals joined together at one end.

    • It generates a voltage proportional to the temperature difference between the two junctions.

    • It is commonly used in industrial and scientific applications to measure temperature.

    • Different types of thermocouples are available, each with its own temperature range and accuracy.

    • Examples of thermocouple types include K, J,...

  • Answered by AI
  • Q4. Are there standards governing types of thermocouple
  • Ans. 

    Yes, there are standards governing types of thermocouple.

    • The International Electrotechnical Commission (IEC) and the American National Standards Institute (ANSI) have established standards for thermocouples.

    • These standards define the types of thermocouples, their temperature ranges, and their accuracy.

    • Examples of thermocouple types include Type J, Type K, Type T, and Type E.

    • Each type has a different combination of meta...

  • Answered by AI
  • Q5. Why are there straight lengths important in installing a vortex orifice devices
  • Ans. 

    Straight lengths are important in installing vortex orifice devices to ensure accurate flow measurement.

    • Straight lengths help to stabilize the flow profile before it reaches the device

    • They prevent turbulence and eddies that can affect the accuracy of the measurement

    • The length required depends on the type of device and the flow conditions

    • For example, a vortex flow meter may require 10 diameters of straight pipe upstream...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Instrumentation commissioning calibration preventive maintenance
Distributed control system (DCS) pressure control programmable logic controller (PLC) and control valves
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I applied via Naukri.com and was interviewed in Nov 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Group Discussion 

Control valve, transmitter,ps gauge, temperature transmitter,o2,on off valve

Interview Preparation Tips

Interview preparation tips for other job seekers - Overall plant smuthly running because instrumentation the best part
Interview experience
3
Average
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via campus placement at Ramrao Adik Institute of Technology, Navi Mumbai and was interviewed before Jun 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Technical 

(10 Questions)

  • Q1. 1) Introduce yourself
  • Q2. 2) What is bourdon type pressure gauge?
  • Ans. 

    A bourdon type pressure gauge is a mechanical device used to measure pressure in a system.

    • Consists of a curved tube that straightens with pressure, causing a pointer to move on a dial

    • Commonly used in industrial applications for measuring pressure in pipelines, tanks, and machinery

    • Available in various designs such as C-type, spiral, and helical bourdon tubes

  • Answered by AI
  • Q3. 3) What is the liquid filled in pressure gauge?
  • Ans. 

    The liquid filled in pressure gauge is typically glycerin or silicone oil.

    • Common liquids used are glycerin and silicone oil

    • The liquid helps dampen the effects of vibration and pulsation on the gauge

    • It also helps lubricate the internal components of the gauge

    • The choice of liquid depends on the application and operating conditions

  • Answered by AI
  • Q4. 4) What is functioning of nucleonic type radar level transmitter and for which applications?
  • Ans. 

    Nucleonic type radar level transmitter uses radioactive sources to measure level of liquids or solids in tanks. It is commonly used in industries like oil and gas, chemical, and power plants.

    • Uses radioactive sources to emit gamma rays towards the material being measured

    • The gamma rays are then reflected back to the detector, with the time taken for the reflection used to calculate the level of the material

    • Suitable for m...

  • Answered by AI
  • Q5. 5) Classification of final control element
  • Ans. 

    Final control elements are classified based on their action, type of motion, and type of signal.

    • Based on action: On-off control, proportional control, PID control

    • Based on type of motion: Linear motion, rotary motion

    • Based on type of signal: Pneumatic, hydraulic, electric

    • Examples: Control valves, actuators, solenoid valves

  • Answered by AI
  • Q6. 6) Working of solenoid valve
  • Ans. 

    A solenoid valve is an electromechanically operated valve that is commonly used to control the flow of liquids or gases.

    • Solenoid valves use an electromagnetic coil to open or close the valve mechanism.

    • They are commonly used in applications such as controlling water flow in irrigation systems, gas flow in HVAC systems, and fluid control in industrial processes.

    • When the coil is energized, it creates a magnetic field that...

  • Answered by AI
  • Q7. 7) Working of float type level measurement
  • Ans. 

    Float type level measurement works by using a float that rises or falls with the liquid level, activating a switch or transmitter.

    • Float rises or falls with the liquid level

    • Float activates a switch or transmitter

    • Commonly used in tanks and vessels for level control

    • Examples: magnetic float level switch, displacer level transmitter

  • Answered by AI
  • Q8. 8) Different units of pressure
  • Ans. 

    Units of pressure include psi, bar, atm, mmHg, and Pa.

    • PSI (pounds per square inch) is commonly used in the United States

    • Bar is a metric unit of pressure equal to 100 kilopascals

    • Atmosphere (atm) is the pressure exerted by the weight of the Earth's atmosphere

    • Millimeters of mercury (mmHg) is commonly used in measuring blood pressure

    • Pascal (Pa) is the SI unit of pressure

  • Answered by AI
  • Q9. 9) Classification of transducers
  • Ans. 

    Transducers can be classified based on various criteria such as principle of operation, electrical output, and application.

    • Classification based on principle of operation: resistive, capacitive, inductive, piezoelectric

    • Classification based on electrical output: analog, digital

    • Classification based on application: temperature, pressure, level, flow

    • Other classifications: active vs. passive, contact vs. non-contact

  • Answered by AI
  • Q10. 10) For setting up chemical plant, which type of designing tools & drawings required?
  • Ans. 

    Designing tools and drawings required for setting up a chemical plant include P&IDs, PFDs, equipment layouts, and instrumentation diagrams.

    • Process and Instrumentation Diagrams (P&IDs) are essential for showing the interconnection of process equipment and the instrumentation used to control the process.

    • Piping and Instrumentation Diagrams (P&IDs) show the piping of the process flow together with the installed equipment a...

  • Answered by AI
Round 3 - HR 

(4 Questions)

  • Q1. 1) Tell me something which is not mentioned in your resume
  • Q2. 2) Tell me about your family background
  • Q3. 3) Tell me about hobbies and Interest
  • Q4. 4) Analyzation skills & Achievements

Interview Preparation Tips

Topics to prepare for TCE Trainee Instrumentation Engineer interview:
  • Transmitters
  • Industrial Valves
  • Level transmitters
Interview preparation tips for other job seekers - Just go through your resume once you attend any drive.

I applied via Walk-in

Round 1 - Technical 

(2 Questions)

  • Q1. Process instrument caliberation f&g
  • Q2. Control valve assembling

Interview Preparation Tips

Interview preparation tips for other job seekers - Caliberation of process instrument f&g, isolation and trouble shooting, assembling of control valve, permit system, safety awerness
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Do not use an unprofessional email address such as cool_boy@email.com. It shows a lack of professionalism by the candidate.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. All instrumentauon related like flow,pressure,temprature,level.
Round 3 - HR 
Round 4 - Technical 

Interview Preparation Tips

Interview preparation tips for other job seekers - Instrumentation maitenance required in this field,like control valve,transmitters,RTD, thermocouple,flow controls related equipment like mass flow meter,orifice plate ,annuar,vertex floe meter any other flow meter required and must be instrumentation field for this industrie.

Gulf Asia Contracting Interview FAQs

How many rounds are there in Gulf Asia Contracting QC Inspector Instrumentation interview?
Gulf Asia Contracting interview process usually has 2 rounds. The most common rounds in the Gulf Asia Contracting interview process are Resume Shortlist and Group Discussion.

Tell us how to improve this page.

Interview Questions from Similar Companies

Tata Steel Interview Questions
4.1
 • 855 Interviews
Tata Projects Interview Questions
4.2
 • 425 Interviews
S&P Global Interview Questions
4.1
 • 275 Interviews
TCE Interview Questions
3.8
 • 247 Interviews
Cummins Interview Questions
4.3
 • 231 Interviews
View all

Fast track your campus placements

View all

Gulf Asia Contracting QC Inspector Instrumentation Reviews and Ratings

based on 2 reviews

5.0/5

Rating in categories

4.0

Skill development

4.2

Work-life balance

4.2

Salary

3.1

Job security

3.9

Company culture

4.4

Promotions

4.4

Work satisfaction

Explore 2 Reviews and Ratings
HSE Officer
16 salaries
unlock blur

₹5 L/yr - ₹12.1 L/yr

Safety Officer
12 salaries
unlock blur

₹9.6 L/yr - ₹12.3 L/yr

Quantity Surveyor
8 salaries
unlock blur

₹4.8 L/yr - ₹16 L/yr

Planning Engineer
8 salaries
unlock blur

₹6.8 L/yr - ₹18 L/yr

Piping Supervisor
6 salaries
unlock blur

₹8 L/yr - ₹20 L/yr

Explore more salaries
Compare Gulf Asia Contracting with

Larsen & Toubro Limited

4.0
Compare

Shapoorji Pallonji Group

4.1
Compare

Tata Projects

4.2
Compare

Hindustan Construction Company

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview