Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Gulf Asia Contracting Graduate Trainee Interview Questions and Answers

Updated 20 Mar 2024

Gulf Asia Contracting Graduate Trainee Interview Experiences

1 interview found

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(3 Questions)

  • Q1. Difference between wrought iron and cast iron
  • Ans. 

    Wrought iron is a tough, malleable iron with a fibrous structure, while cast iron is brittle and hard with a crystalline structure.

    • Wrought iron is tough and malleable, making it suitable for forging and welding.

    • Cast iron is brittle and hard, making it prone to cracking under pressure.

    • Wrought iron has a fibrous structure due to its low carbon content.

    • Cast iron has a crystalline structure due to its high carbon content.

    • E...

  • Answered by AI
  • Q2. Welds used in pipes
  • Ans. 

    Welds used in pipes are crucial for ensuring structural integrity and preventing leaks.

    • Different types of welds used in pipes include butt welds, socket welds, and fillet welds.

    • Welding processes commonly used for pipes include TIG welding, MIG welding, and stick welding.

    • Proper preparation and inspection of welds are essential to prevent defects and ensure quality.

    • Welding codes and standards such as ASME B31.3 provide g

  • Answered by AI
  • Q3. What is isometric view
  • Ans. 

    Isometric view is a method of representing a 3D object in 2D with all three dimensions shown at the same scale.

    • Isometric view shows all three dimensions of an object in a single view

    • Lines parallel to the three major axes are drawn at the same angle

    • Commonly used in technical drawings and video games to give a 3D effect

    • Examples include isometric video games like SimCity and Monument Valley

  • Answered by AI

Interview questions from similar companies

I applied via Campus Placement and was interviewed before Sep 2019. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Basic accounting, Something related to budget or general awareness, costing related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be confident . Whatever will happen in that room will be confidential to limited people. Don't panic, don't let your unwanted thoughts makes you look under confident. It's not the only company there will be many to come.

Have some basic knowledge based on your stream tha will be enough if you're a beginner.

All the best.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Dec 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

It was easy but tough

Round 2 - Technical 

(2 Questions)

  • Q1. What is min coloumn width?
  • Ans. 

    Min column width refers to the smallest width a column can be resized to in a table or spreadsheet.

    • Min column width prevents columns from becoming too narrow to display content properly.

    • It ensures readability and usability of the data in the table.

    • For example, in Microsoft Excel, the default min column width is 8.43 units.

  • Answered by AI
  • Q2. How u joined ncc?

Interview Preparation Tips

Interview preparation tips for other job seekers - Have faith in your self

Skills evaluated in this interview

Interview experience
1
Bad
Difficulty level
Hard
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Apr 2023. There were 4 interview rounds.

Round 1 - Aptitude Test 

General test for the engineers requirement

Round 2 - Group Discussion 

Sustainable Development

Round 3 - HR 

(1 Question)

  • Q1. Why do you choose
Round 4 - Technical 

(3 Questions)

  • Q1. Geotechnical and Field Work
  • Q2. Testing for Cement
  • Q3. Quality in construction
  • Ans. 

    Quality in construction is essential for ensuring safety, durability, and overall satisfaction of the end users.

    • Quality in construction involves using high-quality materials that meet industry standards.

    • It also includes following proper construction techniques and adhering to building codes and regulations.

    • Regular inspections and quality control measures are necessary to ensure that the construction meets the required ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Try not to be casual in reply.
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Jun 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

General aptitude basic

Round 2 - Technical 

(2 Questions)

  • Q1. Technical questions based on our acads
  • Q2. Basics only and not gate level
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
-
Result
Selected Selected

I applied via Campus Placement

Round 1 - One-on-one 

(1 Question)

  • Q1. Explain the different thermodynamic cycles
  • Ans. 

    Thermodynamic cycles are processes that involve the transfer of heat and work to and from a system.

    • Different thermodynamic cycles include Carnot cycle, Rankine cycle, Brayton cycle, and Otto cycle.

    • Carnot cycle is a theoretical cycle that operates between two temperature reservoirs.

    • Rankine cycle is commonly used in steam power plants for electricity generation.

    • Brayton cycle is used in gas turbine engines for aircraft pr...

  • Answered by AI
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Sep 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Simple questions are asked and there was no lot of time

Round 2 - Technical 

(2 Questions)

  • Q1. Why dis you chose a construction company
  • Q2. What is rating of transformers
  • Ans. 

    Transformer rating refers to the maximum amount of power that a transformer can handle without exceeding its temperature limits.

    • Transformer rating is typically expressed in terms of kVA (kilovolt-amperes) or MVA (megavolt-amperes).

    • The rating of a transformer is determined by factors such as its cooling system, insulation class, and temperature rise.

    • For example, a transformer with a rating of 500 kVA can handle a maximu...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Do Research about company
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Reasoning questions and basics of electrical engineering were asked

Round 2 - One-on-one 

(1 Question)

  • Q1. Questions related to DC motors
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via LinkedIn and was interviewed in Aug 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

100 questions for 120 mins

Round 2 - Technical 

(1 Question)

  • Q1. About process of drilling
  • Ans. Drilling is a process where a bore hole is drilled to extract the reservoir fluids
  • Answered Anonymously

Interview Preparation Tips

Topics to prepare for Larsen & Toubro Limited Graduate Trainee interview:
  • prodution
  • Drilling
Interview preparation tips for other job seekers - be perfect with baiscs
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Walk-in and was interviewed before Oct 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Communication,logical reasoning

Round 2 - Technical 

(2 Questions)

  • Q1. Introduce yourself
  • Ans. 

    I am a recent graduate with a degree in Business Administration and a passion for marketing and project management.

    • Recent graduate with a degree in Business Administration

    • Passionate about marketing and project management

    • Strong communication and organizational skills

    • Experience in internships related to marketing and project management

  • Answered by AI
  • Q2. Explain your qualities and weakness
  • Ans. 

    I am a dedicated and hardworking individual with strong communication skills. My weakness is that I can be overly critical of myself.

    • Dedicated and hardworking

    • Strong communication skills

    • Overly critical of myself

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Larsen & Toubro Limited Graduate Trainee interview:
  • C++
Contribute & help others!
anonymous
You can choose to be anonymous

Gulf Asia Contracting Interview FAQs

How many rounds are there in Gulf Asia Contracting Graduate Trainee interview?
Gulf Asia Contracting interview process usually has 1 rounds. The most common rounds in the Gulf Asia Contracting interview process are Technical.
What are the top questions asked in Gulf Asia Contracting Graduate Trainee interview?

Some of the top questions asked at the Gulf Asia Contracting Graduate Trainee interview -

  1. Difference between wrought iron and cast i...read more
  2. what is isometric v...read more
  3. welds used in pi...read more

Recently Viewed

INTERVIEWS

Acro Technologies

No Interviews

INTERVIEWS

Sun Vacuum Formers

No Interviews

INTERVIEWS

Nokia Networks

No Interviews

INTERVIEWS

Gulf Asia Contracting

No Interviews

INTERVIEWS

Sun Vacuum Formers

No Interviews

INTERVIEWS

Spectraforce Technologies

No Interviews

INTERVIEWS

Acro Technologies

No Interviews

INTERVIEWS

Wissen Technology

No Interviews

INTERVIEWS

Sun Vacuum Formers

No Interviews

INTERVIEWS

Mozo Hunt

No Interviews

Tell us how to improve this page.

Gulf Asia Contracting Graduate Trainee Interview Process

based on 2 interviews

Interview experience

4
  
Good
View more

Fast track your campus placements

View all
HSE Officer
16 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Safety Officer
12 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quantity Surveyor
8 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Planning Engineer
8 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Piping Supervisor
6 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Gulf Asia Contracting with

Larsen & Toubro Limited

4.0
Compare

Shapoorji Pallonji Group

4.1
Compare

Tata Projects

4.2
Compare

Hindustan Construction Company

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent