Filter interviews by
I was interviewed before Jan 2024.
Total runout is the combination of radial and axial runout, while runout refers to the deviation of a surface from a true circular path.
Total runout includes both radial and axial components of runout.
Runout specifically refers to the deviation of a surface from a true circular path.
Total runout is a more comprehensive measurement of overall part quality.
Runout is typically measured using a dial indicator or similar to...
8D is a problem-solving methodology used to identify, correct, and prevent recurring problems in manufacturing processes.
8D stands for Eight Disciplines
It is commonly used in the automotive industry
Each of the 8 disciplines represents a step in the problem-solving process, from defining the problem to preventing recurrence
Examples of the 8 disciplines include creating a team, defining the problem, implementing short-te...
Use a straight edge or surface plate to check flatness of uneven surface.
Use a straight edge or surface plate to check for any gaps or rocking on the surface
Measure the deviation from flatness using feeler gauges or dial indicators
Check for any high spots or low spots on the surface
Repeat the process in multiple directions to ensure overall flatness
Top trending discussions
posted on 19 Jan 2021
I was interviewed in Jul 2020.
I have achieved several milestones throughout my career as a Senior Engineer.
Successfully led a team of engineers to develop and implement a new software system, resulting in a 20% increase in efficiency.
Received recognition for designing and implementing a cost-effective solution that reduced production downtime by 30%.
Contributed to the development of a groundbreaking technology that revolutionized the industry, lead...
posted on 1 Jun 2020
I applied via Naukri.com and was interviewed in May 2020. There were 4 interview rounds.
Die casting and machining defects are common in manufacturing processes.
Die casting defects include porosity, shrinkage, cold shuts, and flash.
Machining defects include burrs, chatter marks, and tool marks.
Die casting defects can be caused by improper temperature, pressure, or metal flow.
Machining defects can be caused by dull tools, improper speeds and feeds, or poor fixturing.
Defects can lead to part failure, reduced
Filling and high speed ratio formula is used to calculate the filling time of a container with a specific volume of liquid at a given flow rate.
Filling and high speed ratio formula is V/Q
V is the volume of the container and Q is the flow rate of the liquid
The formula is used to determine the time it takes to fill a container with a specific volume of liquid at a given flow rate
The higher the flow rate, the faster the c
posted on 23 Oct 2021
I applied via Recruitment Consultant and was interviewed before Oct 2020. There were 3 interview rounds.
I have a valid driver's license for both cars and motorcycles.
I have a Class C license for cars
I also have a Class M license for motorcycles
I have a clean driving record with no accidents or violations
I ride a road bike for commuting and a mountain bike for leisure.
I prefer road bikes for their speed and efficiency on paved roads.
I enjoy mountain biking for the challenge and adventure of off-road trails.
I also have experience with hybrid bikes for their versatility.
I prioritize safety and always wear a helmet and follow traffic laws.
I have participated in charity rides and group rides for fun and community.
Vehicle testing involves various methods to ensure safety, performance, and compliance with regulations.
Testing can include physical tests such as crash tests, durability tests, and performance tests.
Simulation and modeling can also be used to test vehicle components and systems.
Testing must comply with regulations set by organizations such as the National Highway Traffic Safety Administration (NHTSA) and the European
We conduct various types of homologation testing depending on the product and its intended market.
We conduct safety testing to ensure compliance with local regulations.
We perform emissions testing to ensure compliance with environmental regulations.
We conduct performance testing to ensure the product meets the required standards.
We also conduct durability testing to ensure the product can withstand the expected wear an...
I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.
Casting should be thorough
Aluminium die Casting
I applied via Walk-in and was interviewed before Dec 2021. There were 3 interview rounds.
GD&T symbols are used to specify the geometric requirements of a part or assembly.
GD&T stands for Geometric Dimensioning and Tolerancing
Symbols include: flatness, circularity, perpendicularity, concentricity, position, and more
Each symbol has a specific meaning and is used to communicate precise engineering requirements
GD&T is used in industries such as aerospace, automotive, and manufacturing
Example: A position symbol...
Cp, Cpk, Pp, and Ppk are statistical process control indices used to measure process capability and performance.
Cp and Cpk measure how well a process meets its specifications, with Cpk being more accurate for non-centered processes.
Pp and Ppk measure how well a process performs relative to its natural variation, with Ppk being more accurate for non-centered processes.
All four indices are calculated using the process me...
I applied via Recruitment Consulltant and was interviewed in Jun 2022. There were 4 interview rounds.
Question abou TPM, OEE, six Sigma, lean manufacturing,kaizen,poka yoke etc
posted on 17 Jun 2024
based on 1 interview
Interview experience
Assistant Engineer
262
salaries
| ₹0 L/yr - ₹0 L/yr |
Quality Engineer
106
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
88
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
83
salaries
| ₹0 L/yr - ₹0 L/yr |
Production Engineer
75
salaries
| ₹0 L/yr - ₹0 L/yr |
Bharat Forge
Samvardhana Motherson Group
Sundaram Clayton
Rane Holdings