Upload Button Icon Add office photos

Global Autotech

Compare button icon Compare button icon Compare

Filter interviews by

Global Autotech Quality Engineer Interview Questions and Answers

Updated 22 Aug 2023

Global Autotech Quality Engineer Interview Experiences

2 interviews found

Interview experience
2
Poor
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Apr 2023. There were 3 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Tell me more about yourself
  • Ans. 

    I am a Quality Engineer with experience in ensuring product quality and implementing quality control processes.

    • Experienced in conducting quality audits and inspections

    • Proficient in using quality tools and techniques such as Six Sigma and Lean

    • Skilled in analyzing data and identifying areas for improvement

    • Strong knowledge of quality standards and regulations

    • Effective communicator and collaborator in cross-functional team

  • Answered by AI
  • Q2. What have you done
  • Ans. 

    As a Quality Engineer, I have implemented various quality control measures and conducted audits to ensure product compliance.

    • Implemented quality control processes to monitor and improve product quality

    • Conducted audits to identify non-conformities and implement corrective actions

    • Collaborated with cross-functional teams to develop and implement quality standards

    • Performed root cause analysis and implemented preventive mea...

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. Least count of micrometre
  • Ans. 

    The least count of a micrometer is the smallest measurement that can be read on the scale.

    • The least count of a micrometer is determined by the number of divisions on the scale and the pitch of the screw.

    • For example, a micrometer with 50 divisions on the scale and a pitch of 0.5 mm would have a least count of 0.01 mm.

    • The least count is important for accurate measurements and should be taken into consideration when using

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. What is Quality control function
  • Ans. 

    Quality control function involves monitoring and testing products to ensure they meet the required standards.

    • Quality control function involves inspecting products to ensure they meet the required specifications

    • It involves testing products to ensure they function as intended

    • It involves monitoring the production process to identify and correct any defects

    • Examples include checking the weight and dimensions of a product, t...

  • Answered by AI

Quality Engineer Interview Questions & Answers

user image Abhishek Kumar Pandey

posted on 22 Aug 2023

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Aug 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. 7Qc Tools 8D X- Bar Chart Casting And Machining Defects About Your Self Difference Bt Accuracy and Precision About Gd&T Role And Responsibility Of Your Current Company
Round 3 - HR 

(1 Question)

  • Q1. Why You Want to Join This Company And Last One Is How Much You Expected Ctc

Quality Engineer Interview Questions Asked at Other Companies

asked in MM AUTO
Q1. What is MSA and addition of msa version, type of msa ,what differ ... read more
asked in MM AUTO
Q2. What is 7 QC tool,parito analysis,xchart and r chart explain ,why ... read more
Q3. If a monkey eat 6 apples more than the previous day and complete ... read more
asked in MM AUTO
Q4. what is IATF audit , cause of IATF , relationship between for IAT ... read more
Q5. What is the Physical & Chemical test of Steel Reinforcement?

Interview questions from similar companies

I applied via Naukri.com and was interviewed in Nov 2020. There were 4 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Tell me something about you
  • Q2. Which company do u past work

Interview Preparation Tips

Interview preparation tips for other job seekers - We wear formal dress

I applied via Walk-in and was interviewed in Apr 2020. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. 7 QC tools?
  • Ans. 

    The 7 QC tools are a set of basic quality control tools used to identify and solve quality problems.

    • Check sheets

    • Control charts

    • Histograms

    • Pareto charts

    • Scatter diagrams

    • Stratification

    • Cause-and-effect diagrams

  • Answered by AI
  • Q2. Roles & Responsibilities on previous company?
  • Ans. 

    As a Quality Engineer in my previous company, I was responsible for ensuring product quality, conducting audits, and implementing quality control processes.

    • Conducted product quality inspections and audits

    • Implemented quality control processes to improve product quality

    • Analyzed data to identify areas for improvement

    • Collaborated with cross-functional teams to address quality issues

    • Ensured compliance with industry standard

  • Answered by AI
  • Q3. QA & QC Difference?
  • Ans. 

    QA focuses on preventing defects while QC focuses on identifying and fixing defects.

    • QA is a proactive process that involves planning, designing, and executing tests to prevent defects from occurring.

    • QC is a reactive process that involves identifying defects through testing and then fixing them.

    • QA is focused on the entire software development life cycle while QC is focused on the testing phase.

    • Examples of QA activities ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Learn Basic, Be strong in that

I applied via Naukri.com and was interviewed in May 2020. There were 4 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. What are the die casting and machining defects?
  • Ans. 

    Die casting and machining defects are common in manufacturing processes.

    • Die casting defects include porosity, shrinkage, cold shuts, and flash.

    • Machining defects include burrs, chatter marks, and tool marks.

    • Die casting defects can be caused by improper temperature, pressure, or metal flow.

    • Machining defects can be caused by dull tools, improper speeds and feeds, or poor fixturing.

    • Defects can lead to part failure, reduced

  • Answered by AI
  • Q2. What is the formula of filling and high speed ratio?
  • Ans. 

    Filling and high speed ratio formula is used to calculate the filling time of a container with a specific volume of liquid at a given flow rate.

    • Filling and high speed ratio formula is V/Q

    • V is the volume of the container and Q is the flow rate of the liquid

    • The formula is used to determine the time it takes to fill a container with a specific volume of liquid at a given flow rate

    • The higher the flow rate, the faster the c

  • Answered by AI
  • Q3. Why do u want to join Motherson?

Interview Preparation Tips

Interview preparation tips for other job seekers - Be always job needy in front of interviewer.

I was interviewed in Jul 2020.

Interview Questionnaire 

1 Question

  • Q1. Waht is your achievements
  • Ans. 

    I have achieved several milestones throughout my career as a Senior Engineer.

    • Successfully led a team of engineers to develop and implement a new software system, resulting in a 20% increase in efficiency.

    • Received recognition for designing and implementing a cost-effective solution that reduced production downtime by 30%.

    • Contributed to the development of a groundbreaking technology that revolutionized the industry, lead...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - All most 3 Rounds they conducted, they taken 3 days for every round and they taken allmost 3 months to select... For learners this company was good...

I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Depends on experience
  • Q2. Related to systematic approach
  • Ans. Problem solving tools, OEE, FPY, Root cause analysis. 14Q, 5S
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Never join Bosch chakan if want to have growing future In career and work life balance.

Interview Questionnaire 

1 Question

  • Q1. Questions were based on CV

Interview Preparation Tips

Interview preparation tips for other job seekers - Be true to what you've mentioned in your CV

I applied via Walk-in and was interviewed before Sep 2020. There was 1 interview round.

Interview Questionnaire 

8 Questions

  • Q1. What's your special with others
  • Ans. I am not compare anyone with me, only learn from others what I need.
  • Answered Anonymously
  • Q2. Are you fit this post
  • Ans. 

    Yes, I am fit for the post of Quality Engineer.

    • I have a strong background in quality engineering with experience in implementing quality control processes.

    • I am skilled in conducting quality audits and inspections to identify areas for improvement.

    • I have expertise in using quality tools and methodologies such as Six Sigma and Lean principles.

    • I have successfully led cross-functional teams to resolve quality issues and im...

  • Answered by AI
  • Q3. In future we found you are not suitable to that place, what your answer
  • Ans. No, without my service, you can't judge me, not only me , anyone
  • Answered Anonymously
  • Q4. Describe yourself
  • Ans. 

    I am a detail-oriented Quality Engineer with a strong background in ensuring product quality and process improvement.

    • Experienced in conducting quality audits and inspections

    • Proficient in using statistical analysis tools to identify and resolve quality issues

    • Skilled in developing and implementing quality control procedures

    • Strong problem-solving and analytical skills

    • Excellent communication and teamwork abilities

  • Answered by AI
  • Q5. How much profit to us by you
  • Ans. From me , you can expect profitable profit. I assured that .
  • Answered Anonymously
  • Q6. What's your bad habits
  • Ans. 

    I tend to procrastinate and sometimes struggle with time management.

    • Procrastination

    • Time management

    • Difficulty prioritizing tasks

    • Occasional lack of focus

  • Answered by AI
  • Q7. Any more questions( HR )
  • Ans. Yes, can i work this organization is my own.
  • Answered Anonymously
  • Q8. Suppose we rejected you, what you think

Interview Preparation Tips

Interview preparation tips for other job seekers - Be bold, straightforward vision, good eye contact, don't show your fear out, sit straight, be positive,

I applied via Recruitment Consultant and was interviewed before Oct 2020. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. Seven QC tools
  • Ans. 

    Seven QC tools are a set of basic quality control tools used to identify and solve quality problems.

    • Check sheets

    • Control charts

    • Histograms

    • Pareto charts

    • Scatter diagrams

    • Stratification

    • Cause-and-effect diagrams

  • Answered by AI
  • Q2. Pareto Analysis

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepare for discussions well in advance. If you do not know the answer please say NO.

Global Autotech Interview FAQs

How many rounds are there in Global Autotech Quality Engineer interview?
Global Autotech interview process usually has 3-4 rounds. The most common rounds in the Global Autotech interview process are Technical, Resume Shortlist and HR.
How to prepare for Global Autotech Quality Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Global Autotech. The most common topics and skills that interviewers at Global Autotech expect are Quality Engineering, Capa, Process Quality, SPC and Apqp.
What are the top questions asked in Global Autotech Quality Engineer interview?

Some of the top questions asked at the Global Autotech Quality Engineer interview -

  1. What is Quality control funct...read more
  2. Least count of microme...read more

Tell us how to improve this page.

Global Autotech Quality Engineer Interview Process

based on 3 interviews

Interview experience

3
  
Average
View more
Global Autotech Quality Engineer Salary
based on 106 salaries
₹1.4 L/yr - ₹4.3 L/yr
28% less than the average Quality Engineer Salary in India
View more details

Global Autotech Quality Engineer Reviews and Ratings

based on 19 reviews

4.4/5

Rating in categories

3.6

Skill development

3.9

Work-life balance

3.2

Salary

4.1

Job security

4.0

Company culture

2.9

Promotions

3.6

Work satisfaction

Explore 19 Reviews and Ratings
Assistant Engineer
262 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
106 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
88 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
83 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
75 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Global Autotech with

Bharat Forge

3.9
Compare

Samvardhana Motherson Group

3.7
Compare

Sundaram Clayton

4.1
Compare

Rane Holdings

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview