Upload Button Icon Add office photos

GAMMON INDIA

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

GAMMON INDIA Post Graduate Engineer Trainee [pget] Interview Questions, Process, and Tips

Updated 22 Sep 2022

GAMMON INDIA Post Graduate Engineer Trainee [pget] Interview Experiences

1 interview found

I applied via campus placement at National Institute of Technology (NIT), Srinagar and was interviewed in Aug 2022. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. What is comprehensive strength of OPC Ans- comprehensive strength is ranging between 33-53 MPa at 28 days ,22-27 MPa at 7days , 16-27 MPa at 3 days of curing after casting
  • Ans. 

    Comprehensive strength of OPC ranges from 33-53 MPa at 28 days of curing after casting.

    • OPC has high compressive strength due to its chemical composition

    • It is commonly used in construction for its durability and strength

    • The strength of OPC increases with time and proper curing

    • Compressive strength is measured in MPa

    • OPC has a comprehensive strength ranging from 33-53 MPa at 28 days of curing after casting

  • Answered by AI
  • Q2. What is the waters absorption capacity of Coarse Aggregate Ans- 0.5-1 Percent
  • Ans. 

    The water absorption capacity of coarse aggregate is 0.5-1%.

    • Water absorption capacity is the amount of water that can be absorbed by the aggregate.

    • Coarse aggregates are larger than 4.75mm in size.

    • Water absorption capacity affects the strength and durability of concrete.

    • Examples of coarse aggregates include gravel, crushed stone, and slag.

  • Answered by AI
  • Q3. What is the width of highway (for 1line) Ans-3.75 m
  • Ans. 

    The width of a highway for one line is typically 3.75 meters.

    • The width of a highway can vary depending on the number of lanes and the location.

    • In the US, the standard width for a single lane highway is 3.7 meters.

    • In Europe, the standard width for a single lane highway is 3.5 meters.

    • The width of a highway is important for safety and traffic flow.

    • Wider highways can accommodate more traffic and reduce congestion.

  • Answered by AI
  • Q4. What is the special gravity of soil Ans -The specific gravity of soil particles lie within the range of 2.65-2.85
  • Ans. 

    The specific gravity of soil particles is the ratio of the weight of a given volume of soil to the weight of an equal volume of distilled water.

    • Specific gravity is an important property of soil that helps in determining its suitability for various engineering applications.

    • It is used to calculate the void ratio, porosity, and degree of saturation of soil.

    • The specific gravity of soil particles is affected by factors such...

  • Answered by AI
  • Q5. What are the most used type of support Ans- 1 Roller 2 pinned 3 fixed
  • Ans. 

    The most used types of support are roller, pinned, and fixed.

    • Roller supports allow for movement in one direction while restricting movement in other directions.

    • Pinned supports allow for rotation at the joint but restrict translation.

    • Fixed supports restrict both rotation and translation.

    • The type of support used depends on the specific engineering application.

    • For example, roller supports are commonly used in bridges to a...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Take care of yourself
Follow up on application
Focus on the employer need
Customize your resume and cover letter

HCLTech

Workplace transformation starts with you

Explore various roles and find your spark with us

Interview questions from similar companies

I applied via Company Website and was interviewed in Feb 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 
Round 3 - Technical 

(1 Question)

  • Q1. Depend upon branch and role
Round 4 - Technical 

(1 Question)

  • Q1. Manager round which is done by hod

Interview Preparation Tips

Interview preparation tips for other job seekers - Package and company details self introduction

I applied via Referral and was interviewed in Jan 2022. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Pros and cons of PT design
  • Ans. 

    PT design refers to pre-tensioned concrete design. It has its own set of advantages and disadvantages.

    • Pros: higher strength and durability, reduced cracking, longer lifespan, better resistance to environmental factors

    • Cons: higher initial cost, more complex construction process, limited flexibility for future modifications

    • Example: PT design is commonly used in bridges and high-rise buildings where strength and durabilit...

  • Answered by AI
Round 2 - One-on-one 

(1 Question)

  • Q1. Depends on interviewer

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company to learn and grow up when you are fresher from college

I applied via Walk-in and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Favourite Subject
  • Ans. 

    My favourite subject is Mathematics.

    • I enjoy solving complex problems and equations.

    • I find it fascinating how mathematical concepts can be applied in various fields.

    • I have a strong foundation in calculus, algebra, and geometry.

    • I have participated in various math competitions and won prizes.

    • I believe that mathematics is the backbone of science and technology.

  • Answered by AI
  • Q2. Machine Design

Interview Preparation Tips

Interview preparation tips for other job seekers - Nothing Special as Trainee Engineer
Contribute & help others!
anonymous
You can choose to be anonymous

GAMMON INDIA Interview FAQs

How many rounds are there in GAMMON INDIA Post Graduate Engineer Trainee [pget] interview?
GAMMON INDIA interview process usually has 1 rounds. The most common rounds in the GAMMON INDIA interview process are Technical.
What are the top questions asked in GAMMON INDIA Post Graduate Engineer Trainee [pget] interview?

Some of the top questions asked at the GAMMON INDIA Post Graduate Engineer Trainee [pget] interview -

  1. What is comprehensive strength of OPC Ans- comprehensive strength is ranging be...read more
  2. What is the special gravity of soil Ans -The specific gravity of soil particle...read more
  3. What is the waters absorption capacity of Coarse Aggregate Ans- 0.5-1 Perc...read more

Recently Viewed

INTERVIEWS

Apptunix

7 interviews

INTERVIEWS

Innov8

3 interviews

INTERVIEWS

Skolar

20 interviews

INTERVIEWS

MRF Tyres

298 interviews

INTERVIEWS

Wingsure

2 interviews

INTERVIEWS

KodNest

21 interviews

INTERVIEWS

Edifecs

13 interviews

INTERVIEWS

Faurecia

59 interviews

INTERVIEWS

QeCAD

No Interviews

INTERVIEWS

Pramura Software

No Interviews

Tell us how to improve this page.

Sun Pharmaceutical Industries

Join us and thrive in a company culture that inspires and empowers.

Civil Engineer
41 salaries
unlock blur

₹2 L/yr - ₹6 L/yr

Assistant Manager
38 salaries
unlock blur

₹4.5 L/yr - ₹9.7 L/yr

Deputy Manager
25 salaries
unlock blur

₹7 L/yr - ₹15.5 L/yr

Civil Site Engineer
20 salaries
unlock blur

₹1.8 L/yr - ₹6 L/yr

Plant Engineer
19 salaries
unlock blur

₹2.8 L/yr - ₹5 L/yr

Explore more salaries
Compare GAMMON INDIA with

Hindustan Construction Company

4.2
Compare

Larsen & Toubro Limited

4.0
Compare

Simplex Infrastructures

3.3
Compare

IRB Infrastructure

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent