Add office photos
i
Fulham
Compare
Filter interviews by
Fulham Interview Questions, Process, and Tips
Fulham Interview Experiences
1 interview found
Selected
I applied via Walk-in and was interviewed before Oct 2023. There was 1 interview round.
(5 Questions)
- Q1. How to check Stencils thickness ?
- Ans.
Stencils thickness can be checked using a thickness gauge or calipers.
Use a thickness gauge to measure the thickness of the stencil material.
Alternatively, calipers can also be used to measure the thickness of the stencil.
Ensure the stencil is clean and flat before taking measurements.
Check for any signs of wear or damage that may affect the stencil thickness.
Compare the measured thickness to the manufacturer's specifi
- Q2. What is the Reflow profile ?
- Ans.
Reflow profile is a temperature-time curve used during the soldering process in Surface Mount Technology (SMT) to ensure proper solder joint formation.
Reflow profile consists of preheat, soak, reflow, and cooling stages.
Each stage has specific temperature and time parameters to gradually heat and cool the components.
Example: A typical reflow profile may have a preheat stage at 150°C for 60 seconds, a soak stage at 180°...
- Q3. What is the aoi machine?
- Ans.
AOI machine stands for Automated Optical Inspection machine, used in electronics manufacturing to detect defects in printed circuit boards.
AOI machine is used in electronics manufacturing to inspect printed circuit boards for defects.
It uses cameras and lighting to capture images of the PCB and analyze them for defects such as missing components, misaligned components, or soldering issues.
The machine can compare the ca...
- Q4. Which is the Solder paste type?
- Ans.
The solder paste type can vary depending on the specific requirements of the SMT process.
Solder paste types include leaded and lead-free options.
Different solder paste types have varying melting points and compositions.
Examples of solder paste types include Sn63/Pb37 (leaded) and SAC305 (lead-free).
- Q5. What is the Solder paste problems?
- Ans.
Solder paste problems can include issues such as insufficient solder paste, excessive solder paste, poor stencil design, and contamination.
Insufficient solder paste can lead to poor solder joints and incomplete connections.
Excessive solder paste can cause bridging between components and short circuits.
Poor stencil design can result in uneven solder paste deposition and misalignment of components.
Contamination in solder...
SMT Operator Interview Questions asked at other Companies
Top trending discussions
Interview questions from similar companies
Vishal
(3 Questions)
- Q1. The interview with design manager
- Q2. Previous experience
- Q3. Substation overview
- Ans.
A substation is a facility used for transforming voltage levels in an electrical power system.
Substations receive high voltage electricity from power plants or transmission lines
They transform the voltage to a lower level for distribution to homes and businesses
Substations may also include equipment for protection, control, and monitoring of the power system
(3 Questions)
- Q1. It's is with design hod
- Q2. Substation equipment
- Q3. Transformer type
- Ans.
Transformers are classified based on their construction and cooling methods, such as dry-type, oil-filled, and cast resin transformers.
Transformers can be classified as dry-type, oil-filled, or cast resin based on their construction and cooling methods.
Dry-type transformers use air as the cooling medium and are suitable for indoor applications.
Oil-filled transformers use oil as the cooling medium and are commonly used ...
Graduate Engineer Trainee (Get) Interview Questions & Answers
Great White Global
Mehul Patel
posted on 12 Nov 2024
Selected
I applied via Approached by Company and was interviewed in Oct 2024. There was 1 interview round.
(2 Questions)
- Q1. Tell me about your self
- Ans.
I am a recent graduate with a degree in engineering, eager to learn and grow in a professional setting.
Recent graduate with a degree in engineering
Eager to learn and grow in a professional setting
Strong problem-solving skills
Experience with relevant software/tools (mention specific ones if applicable)
Team player with good communication skills
- Q2. Experience regarding questions
I applied via Approached by Company and was interviewed in May 2024. There were 5 interview rounds.
(1 Question)
- Q1. Only personal questions.
(1 Question)
- Q1. Again too personal questions followed with questions asked in 1st Round. Looks like counselling.
(1 Question)
- Q1. Again only personal questions with few people handling and very less technical.
2 on-line assessment
(1 Question)
- Q1. Again interrogation only.
Interview Preparation Tips
I applied via LinkedIn and was interviewed in Jul 2024. There were 2 interview rounds.
Needed to prepare a presentation highlighting the financial performance of Belden in last 5 years.
(1 Question)
- Q1. How to approach a analytics problem statement ?
- Ans.
Approach an analytics problem statement by defining the problem, gathering data, analyzing data, and presenting insights.
Define the problem statement clearly and understand the objectives
Gather relevant data from various sources
Clean and preprocess the data to ensure accuracy
Apply appropriate analytical techniques and tools
Interpret the results and draw actionable insights
Present findings in a clear and concise manner
Skills evaluated in this interview
Mechanical Engg. Design Interview Questions & Answers
Huber Suhner Electronics
Anonymous
posted on 28 Jun 2024
(2 Questions)
- Q1. Related to final year project
- Q2. Related to last job profile
(2 Questions)
- Q1. Tell me something about yourself
- Q2. Basic questions
Electrical Engineer- Design Interview Questions & Answers
Amco Saft India
Anonymous
posted on 19 Jun 2024
(2 Questions)
- Q1. Question asked was totally irrelevant with thier work.
- Q2. Electrical calculations
(1 Question)
- Q1. Only salary discussion
CNC Machine Operator Interview Questions & Answers
Marathon Electric India
Anonymous
posted on 24 May 2024
Selected
I applied via Walk-in and was interviewed in Apr 2024. There were 2 interview rounds.
(2 Questions)
- Q1. What is your name
- Q2. My name is AJEET Kumar
(2 Questions)
- Q1. My education qualification
- Q2. ITI electrician
Senior Business Manager Interview Questions & Answers
AmBoxDemo-PuneHQ
unnati chouksey
posted on 19 Feb 2024
Selected
I applied via Naukri.com and was interviewed in Jan 2024. There was 1 interview round.
(3 Questions)
- Q1. Where you see yourself in 5 years?
- Q2. What are your strengths?
- Q3. Why did you apply for this job?
Interview Preparation Tips
Always eye contact with the interviewer
Selected
I applied via Walk-in and was interviewed in Nov 2023. There were 2 interview rounds.
(3 Questions)
- Q1. Whats is vernier calipar list count
- Ans.
Vernier caliper least count is the smallest measurement that can be read on the scale of the caliper.
Vernier caliper least count is the difference between one smallest division on the main scale and one smallest division on the vernier scale.
It helps in achieving more precise measurements than a regular scale.
For example, if the main scale division is 1 mm and the vernier scale division is 0.1 mm, the least count would
- Q2. Wahts is micrometer list count
- Ans.
Micrometer least count is the smallest measurement that can be read on a micrometer scale.
Micrometer least count is determined by the number of divisions on the thimble and the main scale.
It is used to measure very small dimensions accurately.
For example, if a micrometer has 50 divisions on the thimble and the main scale is in millimeters, the least count would be 0.01 mm.
- Q3. What is hight gage working
- Ans.
A height gauge is a precision measurement tool used to measure the height of objects or distances between surfaces.
Height gauges typically consist of a base, a vertical column, a measuring head, and a scriber or probe.
They are commonly used in machining and manufacturing to ensure accurate measurements and dimensions.
Height gauges can be manual or digital, with digital versions offering higher precision and ease of use...
(2 Questions)
- Q1. What is your 1 st company
- Q2. What is experience
Skills evaluated in this interview
Fulham Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
People are getting interviews through
Interview Questions from Similar Companies
|
Senior Engineer
10
salaries
|  ₹2.8 L/yr - ₹9.5 L/yr |
|
Process Quality Engineer
9
salaries
| ₹2.2 L/yr - ₹3.8 L/yr |
|
Executive Accountant
7
salaries
| ₹3.5 L/yr - ₹3.9 L/yr |
|
QA Engineer
7
salaries
| ₹2.2 L/yr - ₹3.6 L/yr |
|
Quality Engineer
7
salaries
| ₹1.8 L/yr - ₹4.2 L/yr |
Polycab Wires
C&S Electric
Medha Servo Drives
Amphenol Interconnect
Calculate your in-hand salary
- Home >
- Interviews >
- Fulham Interview Questions
