FOX Solutions Piping Stress Engineer Interview Questions and Answers

Q1. What is the casting solidification time?
Ans. 
Casting solidification time is the duration it takes for molten metal to solidify in a casting process.
• Casting solidification time depends on factors like material type, mold temperature, and casting geometry.

• Higher pouring temperatures generally result in shorter solidification times.

• Thicker sections of the casting will take longer to solidify compared to thinner sections.

• Aluminum alloys typically have shorter solidif
Answered by AI
Add your answer
Q2. How you decide the parting line?
Add your answer
Q3. What are the Casting design consideration?
Ans. 
Casting design considerations include material selection, part geometry, draft angles, surface finish, and shrinkage.
• Material selection is crucial for the desired properties and performance of the final part.

• Part geometry should be designed to minimize stress concentrations and ensure proper flow of molten metal.

• Draft angles are necessary for easy removal of the part from the mold.

• Surface finish requirements should be ...read more
Answered by AI
Add your answer
Q4. Current and previous work experience.
Add your answer

CAD test-Housing model

Q1. About your self
Add your answer

Q1. Engineering Basics
Add your answer

Q1. Technical questions related to the previous experience
Add your answer

Q1. I was selected for autocad plant 3d designer. Basic pump related questions were asked. Was asked to draw pump suction and discharge piping with its components.
Ans. Tool test involved basic drafting activity.
Answered Anonymously
Add your answer

Was asked for drafting support

Q1. Role responsibility,
Add your answer

Q1. Tool test, on NX
Add your answer

Q1. Thought it was a interview for the post of design engineer but interviewer was interested to pointing out personal details in an unmannered way. In a 12 out of 15 minute of total time span during interview...read more
Add your answer
Q2. They ask questions from irrelevant subjects not from required skills one needed for job role
Add your answer

Q1. Engine basic questions
Add your answer
Q2. Flywheel used in a engine
Ans. 
A flywheel is a mechanical device used in engines to store rotational energy and smooth out fluctuations in engine speed.
• Flywheels are typically made of steel or aluminum and are attached to the engine's crankshaft.

• They store energy during the power stroke and release it during the compression stroke to keep the engine running smoothly.

• Flywheels are also used in hybrid vehicles to store energy from regenerative braking...read more
Answered by AI
Add your answer
Q3. Used of flywheel, crankcase, AVM pre filter
Ans. 
Flywheel, crankcase, and AVM pre filter are components used in internal combustion engines.
• Flywheel stores rotational energy and helps maintain engine speed during power strokes.

• Crankcase houses the crankshaft and other engine components.

• AVM pre filter is used to remove larger particles from the air before it enters the engine.

• These components are essential for the proper functioning of internal combustion engines.
Answered by AI
Add your answer

Q1. How to change the connector in inline wiring harness.
Ans. 
To change the connector in an inline wiring harness, follow these steps:
• Identify the type of connector needed for the replacement

• Disconnect the existing connector from the wiring harness

• Cut off the old connector, leaving enough wire length for the new connector

• Strip the insulation from the wire ends

• Crimp or solder the wires to the new connector

• Secure the new connector to the wiring harness

• Test the connection for proper
Answered by AI
View 1 more answer
Q2. How to Draw the connection line.
Ans. 
To draw a connection line, start by identifying the two points you want to connect. Then, use a ruler or straight edge to draw a straight line between the two points.
• Identify the two points you want to connect

• Use a ruler or straight edge to draw a straight line between the two points

• Ensure the line is clear and well-defined
Answered by AI
View 1 more answer

Questions on logical and quants

Q1. What is Bernoulli principle?
Ans. 
Bernoulli principle states that an increase in the speed of a fluid occurs simultaneously with a decrease in pressure or a decrease in the fluid's potential energy.
• States that as the speed of a fluid increases, its pressure decreases

• Used to explain lift in airplane wings

• Applies to various fluid dynamics situations such as flow through pipes
Answered by AI
Add your answer
Q2. What is stress and how it can be measured?
Ans. 
Stress is a force acting on a material that causes deformation. It can be measured using techniques like strain gauges and load cells.
• Stress is a measure of the internal forces within a material resisting deformation.

• It is typically measured in units of force per unit area, such as Pascals or pounds per square inch.

• Common methods of measuring stress include strain gauges, load cells, and extensometers.

• Stress can be cat...read more
Answered by AI
Add your answer