Upload Button Icon Add office photos

TechnipFMC

Compare button icon Compare button icon Compare

Filter interviews by

TechnipFMC Design Engineer Interview Questions and Answers

Updated 18 May 2024

TechnipFMC Design Engineer Interview Experiences

2 interviews found

Design Engineer Interview Questions & Answers

user image Yogesh Kawale

posted on 18 May 2024

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Role responsibility,
Round 2 - Design Test 

(1 Question)

  • Q1. Tool test, on NX
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Sep 2022. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Technical Questions on Fundamentals of Strength of Materials, Machine Design, Material Science & different manufacturing methodologies like Welding, Forging, Machining etc....

Round 3 - Group Discussion 

To discuss in a Group of 10 - 12 people, We need to share the views and opinions. Initiation and Conclusion plays a crucial role.

Round 4 - Technical 

(1 Question)

  • Q1. This is like Technical interview where they will be asking how we answered those Technical questions in the initial screening exam. Need to be atleast confident in atleast 3 core subjects preferably Streng...
Round 5 - HR 

(1 Question)

  • Q1. Basic Questions like Hobbies, Aspirations and will check communication skills and how confident we are in dealing different situations in project execution.

Interview Preparation Tips

Topics to prepare for TechnipFMC Design Engineer interview:
  • B.E Mechanical
  • Manufacturing Engineering
  • Material engineering
Interview preparation tips for other job seekers - Just give your best. Don't bluff. Try to accept if we don't understand the question.
Be strong and Sound in Technical Knowledge and offcourse good communication skills needed to crack this.

Design Engineer Interview Questions Asked at Other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel ... read more
Q2. what is the difference between lathe and milling machine?
Q3. What is design considerations to mske while designing a Part?
Q4. Which are the operations performed on sheet metal to increase the ... read more
Q5. WHAT IS GD&T IN MECHANICAL? DESCRIBLE ALL IN DETAILS .

Interview questions from similar companies

I applied via Campus Placement

Interview Preparation Tips

Round: Technical Interview
Experience: basic intro, focussed mainly on projexts you have done and softwares u know.. and basic core questions

General Tips: prepare well
Skills:
Duration: 2
College Name: IIT Madras
Motivation: seniors good reviews

Interview Questionnaire 

1 Question

  • Q1. How will you design a swimming diving board?
  • Ans. 

    To design a swimming diving board, I will consider the material, dimensions, weight capacity, and safety features.

    • Choose a durable and non-slip material like fiberglass or aluminum

    • Determine the appropriate length, width, and thickness based on the intended use and user demographics

    • Calculate the weight capacity and ensure it can support the maximum weight of a user

    • Incorporate safety features like a non-slip surface, rou...

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: I had a standard resume for this company as per our institute placement cell norms. I usually changed my “Areas of Interest” as per the company profile. For Caterpillar, I laid emphasis on all of my technical activities.

Round: Test
Experience: The written test was purely technical covering almost all the major topics of Mechanical Engineering course curriculum. The questions related to Fluid Mechanics were particularly difficult. The questions were all objective and the test was for a duration of 90 minutes.
Tips: For Caterpillar, one must have in-depth knowledge of almost all major topics of mechanical.
Duration: 90 minutes

Round: Technical Interview
Experience: The questions were totally technical. There were no HR questions even in the beginning. They asked me about my topic of interest and I replied as Solid Mechanics. They asked questions related to designing of stuff. For example one of the question that was asked from me was – How will you design a swimming diving board? It was a question on cantilever beam. The whole interview continued on this particular question. They kept on counter questioning and gave me additional situations as I proceeded and I had to incorporate them in my design process. They asked me to develop a static design and thereafter asked me to develop a dynamic design. Then they asked me for another subject of interest which I stated as vibration design. Then they asked me to do vibration analysis of the swimming board that I had designed earlier in the interview. They also asked me my favorite topic from class 10th and I replied as Mathematics. They asked me a simple question on it which I answered correctly.

College Name: IIT ROORKEE
Motivation: Most of the information regarding the company was obtained by attending the Pre-Placement Talk. The company is one of the pioneers in its field and hence it was sort of a dream company for students and we had researched about it by visiting its website and the Wikipedia Page.

I applied via Campus Placement

Interview Preparation Tips

Round: Resume Shortlist
Experience: Not very transparent and highly delayed.
Tips: Can indicate selection status immediately or within one day of announcement. One sentence describing reason for rejection or acceptance can be given.

Round: Test
Experience: N/A
Tips: N/A

General Tips: Please let us know in case of rejection or waiting list, we have to apply to other companies as well to secure an intern and a simple sentence on reason for rejection will be very helpful.
Skills: Python, Simulink, MATLAB
Duration: 1.5
College Name: IIT Madras
Motivation: Internationally reputed, Core mechanical company designing heavy machinery.

Interview Preparation Tips

Round: Resume Shortlist
Experience: I had mentioned my extra-curricular activities in my resume in a detailed and organised manner (all listed in a chronological order). Most of these were techno-managerial activities (organizational responsibilities in my tech fest). I had participated in an event called Robocon which added a new dimension to me resume. I had done a project and a couple of internships during my four years of study – I mentioned the details of these in my resume. Although the resume that we submitted was in a standard format as per the norms of our placement cell, I referred to a website of Princeton University to prepare my resume. It’s a very good website and hugely referred by students for preparing their resume. I also got some valuable insights from my seniors for building my resume. I laid stress on my achievements related to the technical field, because I wanted to land a job in my core field of study.

Round: Test
Experience: The first round was the written test. The paper consisted of questions from general aptitude, technical ability and verbal ability. The paper was slightly lengthy and required a bit more stress on speed while maintaining the accuracy. The verbal ability part was easy; if a person had prepared for CAT, then he would not have found the paper difficult. The difficulty level of general aptitude questions was at par with the verbal ability questions. The technical questions were however slightly more difficult as compared to the other two. To answer these questions required a fair amount of knowledge on topics like ‘General Mechanics’, ‘Fluid Mechanics’, ‘Machining’ and ‘Solid Mechanics’. Some questions from ‘Thermodynamics’ were also asked. The total duration of the test was 90 minutes and the number of questions was 60. The test only had objective questions.
Duration: 90 minutes
Total Questions: 60

Round: HR Interview
Experience: The next round was the personal interview round. I had my interview the very next morning. The very first question the interviewers asked was related to me as person – my schooling, my family background and my four years of college life. The interviewer then did a review of my resume and picked some points and then questioned me on that. He also asked me about my areas of interest. I told them that I had cultivated a lot of interest in ‘Machine Design’. I showed them some pictures of the Robocon event that I had participated in, which quite impressed them. I was then asked to design the chair that I was sitting on considering all the different design aspects. I designed the chair by doing the load analysis and by carrying out some other important tests. However one important aspect that I did not account for was the safety of the design, which I realized after the interview. Another mistake that I think I committed was that I did not use the technical terms related to designing. I felt they were looking out for those important technical terms. I was then asked that if I had a choice of using wood, steel and plastic which of those materials would I use to make the chair. I basically had to give the preference order. I replied stating that plastic would be my first choice since it is cheap and most people can afford it, then steel because the fabrication process was less tedious in case of steel and placed wood last. They then cross questioned me that if I considered wood to be least preferred material for designing the chair, then why furniture is being manufactured from wood. I could not give them a suitable answer.

College Name: IIT ROORKEE

I applied via Walk-in and was interviewed before Apr 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Explain Compilation process steps?
  • Ans. 

    Compilation process involves several steps to convert source code into executable code.

    • Preprocessing: Includes header file inclusion, macro expansion, and conditional compilation.

    • Compilation: Translates source code into assembly code.

    • Assembly: Converts assembly code into machine code.

    • Linking: Combines object files and libraries to create an executable file.

    • Loading: Loads the executable file into memory and prepares it

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well prior the interview, revise all the basic concepts of Embedded C and MATLAB if you have applied for embedded systems.

I applied via Referral and was interviewed before Jun 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Questions on Process,Simulation, CAD

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident

I applied via Recruitment Consultant and was interviewed in Mar 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Questions were related to the post John Deere were offering to candidates. For me it was Diagnostics Author position.

Interview Preparation Tips

Interview preparation tips for other job seekers - Always be aware that answer as simple as you can.
If you don't know the answer don't try to attempt simply say that you don't know and assure interviewer that if you ll get a chance you will definitely answer that.

Be optimistic and attentive.

I applied via Referral and was interviewed in Mar 2018. There were 5 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Technical interview based on past company experience

Interview Preparation Tips

Round: Resume Shortlist
Experience: Casting background

Round: Test
Experience: Model test on creo 2

General Tips: Interview was excellent as they need mainly candidate having good product exposure in detail which ever field you are working make sure you have thorough knowledge.Gd&t must be good and cad knowledge is must...
Skills: Creo 2, Communication, Body Language, Leadership, Decision Making Skills
Duration: <1 week

TechnipFMC Interview FAQs

How many rounds are there in TechnipFMC Design Engineer interview?
TechnipFMC interview process usually has 3-4 rounds. The most common rounds in the TechnipFMC interview process are Technical, Resume Shortlist and Aptitude Test.
How to prepare for TechnipFMC Design Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at TechnipFMC. The most common topics and skills that interviewers at TechnipFMC expect are Design Engineering, Detail Engineering, Mechanical Engineering, Chemical Engineering and Process Engineering.
What are the top questions asked in TechnipFMC Design Engineer interview?

Some of the top questions asked at the TechnipFMC Design Engineer interview -

  1. This is like Technical interview where they will be asking how we answered thos...read more
  2. Tool test, on...read more

Tell us how to improve this page.

TechnipFMC Design Engineer Interview Process

based on 2 interviews

Interview experience

4
  
Good
View more
TechnipFMC Design Engineer Salary
based on 70 salaries
₹3.2 L/yr - ₹9 L/yr
24% more than the average Design Engineer Salary in India
View more details

TechnipFMC Design Engineer Reviews and Ratings

based on 12 reviews

3.7/5

Rating in categories

3.6

Skill development

3.6

Work-life balance

3.5

Salary

3.5

Job security

3.7

Company culture

3.5

Promotions

3.6

Work satisfaction

Explore 12 Reviews and Ratings
Senior Engineer
164 salaries
unlock blur

₹7.5 L/yr - ₹25 L/yr

Lead Analyst
133 salaries
unlock blur

₹4 L/yr - ₹11 L/yr

Senior Executive
125 salaries
unlock blur

₹3.3 L/yr - ₹8.2 L/yr

L2 Engineer
115 salaries
unlock blur

₹7 L/yr - ₹16.5 L/yr

Engineer 1
84 salaries
unlock blur

₹4.9 L/yr - ₹10.6 L/yr

Explore more salaries
Compare TechnipFMC with

John Deere

4.1
Compare

Cummins

4.3
Compare

ABB

4.1
Compare

KONE

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview