Upload Button Icon Add office photos

Filter interviews by

Action Construction Equipment Design Engineer Interview Questions and Answers

Updated 1 Feb 2023

Action Construction Equipment Design Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. How to change the connector in inline wiring harness.
  • Ans. 

    To change the connector in an inline wiring harness, follow these steps:

    • Identify the type of connector needed for the replacement

    • Disconnect the existing connector from the wiring harness

    • Cut off the old connector, leaving enough wire length for the new connector

    • Strip the insulation from the wire ends

    • Crimp or solder the wires to the new connector

    • Secure the new connector to the wiring harness

    • Test the connection for proper

  • Answered by AI
  • Q2. How to Draw the connection line.
  • Ans. 

    To draw a connection line, start by identifying the two points you want to connect. Then, use a ruler or straight edge to draw a straight line between the two points.

    • Identify the two points you want to connect

    • Use a ruler or straight edge to draw a straight line between the two points

    • Ensure the line is clear and well-defined

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Go with free mind, be confident, presentable, and realistic you will definitely clear the interview.

Interview questions from similar companies

I applied via Referral and was interviewed before Apr 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Maintenance phylosophy
  • Ans. Depends on equipment running hour, criticality, availability and standby.
  • Answered Anonymously

Interview Preparation Tips

Topics to prepare for Thermax Limited Senior Engineer interview:
  • Boe
  • Energy manager
Interview preparation tips for other job seekers - Be confidential and technically strong.

I applied via Naukri.com and was interviewed in May 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. They just asked basics que. related to job profile.. seeking confidence..

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident.... should have basic knowledge of process. and knowledege of work and items.. and their costing and commercial terms.
Round 1 - Technical 

(1 Question)

  • Q1. Basic electric questions and PLC programming
Round 2 - Technical 

(1 Question)

  • Q1. Based on your project

Interview Preparation Tips

Interview preparation tips for other job seekers - More question will be on your project for experience people
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What is your experiencce
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Aug 2023. There were 2 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. Salary expectations, notice period.
Round 2 - Technical 

(1 Question)

  • Q1. Calibration, process , Dcs, logic
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Mar 2023. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. What is the process of erection of duct
  • Ans. 

    The process of erection of duct involves planning, fabrication, transportation, installation, and testing.

    • Planning involves determining the layout, size, and material of the ducts.

    • Fabrication includes cutting, bending, and assembling the ducts according to the design.

    • Transportation is the movement of fabricated ducts to the installation site.

    • Installation involves positioning and connecting the ducts to the HVAC system.

    • ...

  • Answered by AI
  • Q2. What is the code followed for the fabrication of steel structure materials
  • Ans. 

    The code followed for the fabrication of steel structure materials is typically based on industry standards and regulations.

    • The fabrication of steel structures is typically governed by codes such as the American Institute of Steel Construction (AISC) Code of Standard Practice.

    • Other codes that may be followed include the American Welding Society (AWS) D1.1 Structural Welding Code - Steel.

    • Fabrication processes must also ...

  • Answered by AI
  • Q3. Erection sequence of steel structure
  • Ans. 

    The erection sequence of a steel structure involves planning and executing the assembly of components in a specific order to ensure safety and stability.

    • Start by assembling the foundation and anchor bolts.

    • Next, erect the columns and connect them to the foundation.

    • Then, install the beams and trusses to form the framework.

    • After that, add the bracing and diagonal members for stability.

    • Finally, complete the structure by ad...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
Selected Selected
Round 1 - Technical 

(2 Questions)

  • Q1. What is the Erection sequence of ESP ?
  • Ans. 

    The erection sequence of ESP involves several steps to ensure proper installation and functioning.

    • 1. Prepare the foundation for the ESP unit.

    • 2. Install the support structure for the ESP.

    • 3. Assemble the ESP components such as the casing, electrodes, and rapping system.

    • 4. Connect the necessary electrical and mechanical components.

    • 5. Test the ESP system for proper functioning before commissioning.

    • 6. Commission the ESP sys...

  • Answered by AI
  • Q2. Name of manufactures of various ESP materials supplier
  • Ans. 

    Various ESP materials suppliers include Schlumberger, Baker Hughes, Halliburton, Weatherford, and National Oilwell Varco.

    • Schlumberger

    • Baker Hughes

    • Halliburton

    • Weatherford

    • National Oilwell Varco

  • Answered by AI
Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jun 2024. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. What are some of the clients that i deal with.
  • Q2. Are you aware of the portals on which tenders are submitted.

Interview Preparation Tips

Interview preparation tips for other job seekers - To be honest, there were not much questioned asked by the employer. Just some basic questions about what i do and thats it. It did not feel like a interview but more of a friendly conversation.
one of the reason i feel that happened, because they were in need of a employee and they just selected me.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jul 2024. There were 3 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. All Processes regarding mfg & planning
  • Ans. 

    The candidate should have a strong understanding of manufacturing and planning processes.

    • Knowledge of lean manufacturing principles

    • Experience with production scheduling and capacity planning

    • Understanding of supply chain management

    • Ability to optimize processes for efficiency and cost-effectiveness

  • Answered by AI
  • Q2. Mangement Skill
Round 2 - Technical 

(2 Questions)

  • Q1. Future Plans in the same career
  • Ans. 

    I plan to continue advancing my skills in engineering through further education and certifications, as well as taking on more leadership roles within the field.

    • Pursuing a master's degree in engineering to deepen my knowledge and expertise

    • Obtaining professional certifications such as PMP or Six Sigma to enhance my skill set

    • Seeking opportunities to lead projects and teams to develop my leadership abilities

    • Staying updated...

  • Answered by AI
  • Q2. Ensuring technical awareness
Round 3 - HR 

(2 Questions)

  • Q1. Retention Ensuring Family details How can u survive here
  • Ans. 

    Ensuring retention by creating a supportive work environment for employees and their families.

    • Offering flexible work hours and remote work options to accommodate family needs

    • Providing comprehensive health insurance and wellness programs for employees and their families

    • Organizing family-friendly events and activities to promote work-life balance

    • Offering competitive salaries and benefits to attract and retain top talent

  • Answered by AI
  • Q2. Negotiation Compensation

Interview Preparation Tips

Interview preparation tips for other job seekers - If you are from South Side of India, you'll have to sacrifice your atmosphere, your food & cleanness

Action Construction Equipment Interview FAQs

How many rounds are there in Action Construction Equipment Design Engineer interview?
Action Construction Equipment interview process usually has 2 rounds. The most common rounds in the Action Construction Equipment interview process are Resume Shortlist and Technical.
What are the top questions asked in Action Construction Equipment Design Engineer interview?

Some of the top questions asked at the Action Construction Equipment Design Engineer interview -

  1. How to change the connector in inline wiring harne...read more
  2. How to Draw the connection li...read more

Tell us how to improve this page.

Action Construction Equipment Design Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
Action Construction Equipment Design Engineer Salary
based on 40 salaries
₹3 L/yr - ₹6.3 L/yr
17% less than the average Design Engineer Salary in India
View more details

Action Construction Equipment Design Engineer Reviews and Ratings

based on 2 reviews

3.9/5

Rating in categories

2.0

Skill development

3.0

Work-life balance

2.0

Salary

3.0

Job security

3.0

Company culture

3.0

Promotions

3.0

Work satisfaction

Explore 2 Reviews and Ratings
Assistant Manager
186 salaries
unlock blur

₹3.2 L/yr - ₹10.4 L/yr

Senior Engineer
124 salaries
unlock blur

₹3 L/yr - ₹7.2 L/yr

Engineer
111 salaries
unlock blur

₹2 L/yr - ₹6 L/yr

Deputy Manager
87 salaries
unlock blur

₹6.4 L/yr - ₹13 L/yr

Production Engineer
82 salaries
unlock blur

₹2 L/yr - ₹5.4 L/yr

Explore more salaries
Compare Action Construction Equipment with

Thermax Limited

4.1
Compare

ABB

4.1
Compare

Isgec Heavy Engineering

3.8
Compare

Kirloskar Oil Engines

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview