Upload Button Icon Add office photos

Filter interviews by

ENGIE Assistant Engineer Interview Questions, Process, and Tips

Updated 13 Jan 2022

ENGIE Assistant Engineer Interview Experiences

1 interview found

I applied via Recruitment Consultant and was interviewed in Jul 2021. There were 4 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. What will be your action at releasing hydrogen gas in the plant while you are at work?
  • Ans. 

    I will immediately inform the supervisor and follow the emergency protocol for handling hydrogen gas release.

    • Inform the supervisor immediately

    • Follow the emergency protocol for handling hydrogen gas release

    • Evacuate the area if necessary

    • Wear appropriate personal protective equipment

    • Ensure proper ventilation

    • Monitor the gas levels

    • Take necessary steps to prevent ignition sources

  • Answered by AI
  • Q2. Which direction you will choose while firing or hazardous gas leakage and how will you choose the direction?
  • Ans. 

    I will choose the direction opposite to the wind direction to avoid spreading of fire or gas leakage.

    • Choose direction opposite to wind direction

    • Avoid spreading of fire or gas leakage

    • Consider the location of people and property

    • Use appropriate firefighting equipment

    • Evacuate people from the affected area

  • Answered by AI
  • Q3. Procedure of isolating the during operating condition?
  • Ans. 

    Isolating equipment during operation is a critical safety measure.

    • Identify the equipment to be isolated

    • Notify all personnel in the area

    • Follow lockout/tagout procedures

    • Verify that the equipment is de-energized

    • Install lockout/tagout devices

    • Perform the necessary maintenance or repairs

    • Remove lockout/tagout devices

    • Verify that the equipment is operational

    • Notify all personnel that the equipment is back in service

  • Answered by AI
  • Q4. What's the way of rackout in switch gear ?
  • Ans. 

    Rackout in switch gear refers to the process of removing a circuit breaker from its cell in the switch gear.

    • Rackout is done to isolate the circuit breaker for maintenance or replacement.

    • The circuit breaker is first switched off and then the rackout mechanism is engaged.

    • The circuit breaker is then pulled out of its cell using the rackout handle.

    • The circuit breaker can then be replaced or maintained as required.

    • After mai...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Everyone should answer the question strongly and not hesitate to spell out the answer whether it is right or wrong and answer with logic

Interview questions from similar companies

I applied via PLACEMENT

Interview Preparation Tips

Round: Technical Interview
Experience: Good detailed interview in terms of technical knowledge
Tips: Should be thorough with the projects you have done during the course

General Tips: be confident of what you put in your resume
Technical knowledge regarding projects undertaken during engineering should be sound
Be confident
Skills: Communication, Thinking capability, knowledge applying capability
College Name: V.E.S Institute Of Technology
Motivation: Opportunity to work in a renowned and core technical company
Funny Moments: We consider the interview panelists to be as tough as our viva externals. Interviewers are mostly on your side(contrary to viva professors :P)

I was interviewed before Sep 2016.

Interview Questionnaire 

1 Question

  • Q1. Ocampo, basic electronics and C

Interview Preparation Tips

Round: Test
Duration: 1 hour
Total Questions: 50

Skills: Embedded Systems, C Programming
College Name: Sahyadri college of engineering

Interview Questionnaire 

3 Questions

  • Q1. What is android architecture stack?
  • Ans. 

    Android architecture stack is a set of layers that make up the Android operating system.

    • The stack includes four main layers: Linux kernel, native libraries, Android runtime, and application framework.

    • The Linux kernel provides low-level system functionality.

    • Native libraries are written in C or C++ and provide access to hardware-specific features.

    • The Android runtime includes the Dalvik virtual machine and core libraries.

    • ...

  • Answered by AI
  • Q2. What is AIDL?
  • Ans. 

    AIDL stands for Android Interface Definition Language, used for inter-process communication in Android.

    • AIDL is used to define the interface between client and service in Android.

    • It allows communication between different processes in Android.

    • AIDL is used to pass complex data types between processes.

    • AIDL is similar to Remote Procedure Call (RPC) in other programming languages.

    • Example: AIDL is used in Android to implement...

  • Answered by AI
  • Q3. What is hash set and hash map
  • Ans. 

    Hash set and hash map are data structures used to store key-value pairs for efficient retrieval.

    • Hash set stores unique values without any specific order.

    • Hash map stores key-value pairs and allows fast retrieval of values based on keys.

    • Both use hashing to map keys to their corresponding values.

    • In Java, HashSet and HashMap are implementations of these data structures.

  • Answered by AI

Skills evaluated in this interview

I applied via Walk-in and was interviewed before Aug 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Work Experience related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare your resume well in line to your experience

I applied via Company Website and was interviewed before Feb 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

About experience and scope of work current organization and civil engineering related questions.

Round 3 - HR 

(2 Questions)

  • Q1. What are your salary expectations?
  • Q2. Why are you looking for a change?

Interview Preparation Tips

Interview preparation tips for other job seekers - Deep knowledge of civil engineering field management and quality .

I applied via Naukri.com and was interviewed before Oct 2019. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Concrete rate breakup, Asking rate
  • Q2. Unique thumbrules breakup and unit conversion

Interview Preparation Tips

Interview preparation tips for other job seekers - I explained the concrete breakup with the margin of sub contractor, also explain the subcontractor unit rate breakup and Asking rate is anything like in cricket how many balla are remaining and how much u need to score more. Like.

Joining in L&T is my (No) for evey civil engineers dream..
Thumbrules break up
Rebar - (D2/162) ----(Area x Lengh x 7850).
Like

I applied via Naukri.com and was interviewed in Jul 2019. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Asked about To mentioned areas of weakness of L&T, or needs improvement?
  • Q2. How to make check or maintain elevation of Underground Piping.
  • Ans. 

    Maintain elevation of underground piping by using level instruments and proper installation techniques.

    • Use a level instrument to check the elevation of the piping during installation.

    • Ensure that the piping is installed with a consistent slope to prevent low spots where water can accumulate.

    • Regularly inspect the piping to ensure that it has not shifted or settled, which can affect the elevation.

    • Consider using supports o...

  • Answered by AI
  • Q3. My Job specific role & responsibility, in previous organisation.
  • Ans. 

    In my previous role as Assistant Manager, I was responsible for overseeing daily operations, managing staff, and ensuring customer satisfaction.

    • Managed a team of employees and delegated tasks effectively

    • Handled customer complaints and resolved issues in a timely manner

    • Created and implemented strategies to improve efficiency and productivity

    • Collaborated with other departments to achieve company goals

    • Conducted performanc

  • Answered by AI
  • Q4. Welding Electrodes for different materials.
  • Ans. 

    Welding electrodes are chosen based on the material being welded. Different materials require different types of electrodes.

    • Electrodes for mild steel have a coating that produces a stable arc and minimal spatter.

    • Stainless steel electrodes have a coating that resists corrosion and produces a smooth, clean weld.

    • Cast iron electrodes have a high nickel content to prevent cracking.

    • Aluminum electrodes have a special coating ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Just Be confidant, Be Humble, Be aware about your roles & Responsibility during job Period.

Interview Questionnaire 

5 Questions

  • Q1. Pertaining to the mentioned roles and responsibilities in your resume
  • Q2. Planning and work order creation
  • Q3. Piling activities
  • Q4. Introduction
  • Q5. Cross checking of documents

Interview Preparation Tips

Round: Resume Shortlist
Experience: On the criteria that I scored atleast 60% overall and had no gap between job/s.

Interview Questionnaire 

2 Questions

  • Q1. The question was regarding the present role I'm assigned and how the implementation of scheduling tools can help planning of E.P.C. in their present business unit.
  • Q2. Technical question on my present project scheduling role & any other digital concept i'm associated with it currently.

Interview Preparation Tips

Round: Resume Shortlist
Experience: These days, not many companies shortlists the candidates by themselves instead they hire third parties in order to minimize the resources and cost burden. These talent acquisition members initially filters the resumes based upon the Years of Experience & the key skills which they receive from their parent companies by matching with the 70-80 % kind of similar roles of the candidates.

In my case, both my experience & roles are perfectly in sync with their requirements. So, they contacted me via naukri.com and asked me to share the updated resume & within a week I got the confirmation of my resume shortlisting & date for the 1st round of interview.

Round: Test
Experience: Primavera Scheduling Test

ENGIE Interview FAQs

What are the top questions asked in ENGIE Assistant Engineer interview?

Some of the top questions asked at the ENGIE Assistant Engineer interview -

  1. Which direction you will choose while firing or hazardous gas leakage and how w...read more
  2. What will be your action at releasing hydrogen gas in the plant while you are a...read more
  3. What's the way of rackout in switch gear...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Amazon Interview Questions
4.1
 • 5k Interviews
Flipkart Interview Questions
4.0
 • 1.3k Interviews
Siemens Interview Questions
4.1
 • 418 Interviews
PolicyBazaar Interview Questions
3.6
 • 348 Interviews
JustDial Interview Questions
3.5
 • 328 Interviews
Info Edge Interview Questions
3.9
 • 316 Interviews
Zomato Interview Questions
3.8
 • 312 Interviews
View all
Assistant Manager
16 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Manager
5 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Engineer
5 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Construction Management
5 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare ENGIE with

Siemens

4.1
Compare

Schneider Electric

4.1
Compare

ABB

4.1
Compare

Honeywell Automation

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview