Filter interviews by
Top trending discussions
I applied via Naukri.com and was interviewed in Oct 2020. There was 1 interview round.
I applied via Campus Placement and was interviewed before Aug 2022. There were 2 interview rounds.
Final effluent water parameters refer to the quality of treated wastewater before it is discharged into the environment.
Parameters include pH, turbidity, dissolved oxygen, biochemical oxygen demand, total suspended solids, and fecal coliform count.
The specific parameters required may vary depending on local regulations and the receiving water body.
Monitoring and controlling final effluent water parameters is crucial to...
Ras pump capacity refers to the maximum flow rate of the pump used in the Recirculating Aquaculture System (RAS).
The capacity of the RAS pump depends on the size of the system and the number of fish being raised.
The pump capacity should be able to circulate the entire volume of water in the system at least once per hour.
A larger pump may be required if additional equipment, such as a biofilter or UV sterilizer, is adde...
Various chemicals are used in water treatment plants to purify water and make it safe for consumption.
Coagulants like aluminum sulfate and ferric chloride are used to remove suspended particles
Chlorine is added to kill bacteria and viruses
Fluoride is added to prevent tooth decay
Lime is used to adjust pH levels
Activated carbon is used to remove organic compounds and improve taste and odor
Sodium hydroxide is used to adju
posted on 21 Jul 2022
I applied via Recruitment Consulltant and was interviewed in Jan 2022. There was 1 interview round.
I am an experienced logistics professional with a strong background in managing operations and optimizing supply chain processes.
Over 5 years of experience in logistics management
Proven track record of improving efficiency and reducing costs
Expertise in inventory management and transportation planning
Strong leadership and team management skills
Implemented a new inventory tracking system that reduced stockouts by 30%
Str...
I have 5 years of experience in logistics.
I have worked in logistics for 5 years.
During my time in logistics, I have gained experience in managing inventory, coordinating shipments, and optimizing supply chain processes.
I have successfully implemented cost-saving measures and improved efficiency in logistics operations.
I have experience in using logistics software and tools to track shipments and analyze data.
I have al...
I appeared for an interview in Feb 2025, where I was asked the following questions.
posted on 8 Feb 2022
I applied via Recruitment Consulltant and was interviewed before Feb 2021. There were 3 interview rounds.
Behavior
The weight of a 25mm diameter steel bar of 4 meters length.
To calculate the weight, we need to know the density of the steel.
The density of steel is typically around 7850 kg/m^3.
Using the formula weight = volume * density, we can calculate the weight of the steel bar.
The volume of a cylindrical bar can be calculated using the formula volume = π * (diameter/2)^2 * length.
Substituting the values, we can calculate the wei
To check the right angle of walls corner, use a carpenter's square or a digital angle finder.
Use a carpenter's square by placing it against the corner of the wall and checking if the edges align perfectly.
Alternatively, use a digital angle finder to measure the angle between the two walls and ensure it is 90 degrees.
Ensure the walls are straight and plumb before checking the corner angle.
The size of a full play can vary depending on the specific production and script.
The size of a full play can range from small-scale productions with a few actors to large-scale productions with a large cast and elaborate sets.
Some plays may require a small ensemble cast, while others may have a large ensemble cast.
The size of a play can also be influenced by the number of scenes, locations, and set changes.
For example,...
Safety refers to the measures and precautions taken to prevent accidents, injuries, and hazards in the workplace.
Safety involves identifying and assessing potential risks and hazards in the workplace.
It includes implementing safety protocols, procedures, and guidelines to minimize or eliminate risks.
Safety also involves providing appropriate safety equipment and training to employees.
Regular inspections and audits are ...
Scale 1:30 refers to a ratio where 1 unit on the scale represents 30 units in real life.
Scale 1:30 is commonly used in architectural and engineering drawings.
It means that every measurement on the drawing is 30 times smaller than the actual size.
For example, if a wall is represented as 10 cm on the drawing, its actual size would be 300 cm (10 cm x 30).
In order to fix the joints of RCC walls and block walls, various methods can be used such as grouting, sealing, and reinforcement.
Grouting is the process of filling the joints with a cementitious material to provide strength and stability.
Sealing the joints with appropriate sealants helps in preventing water leakage and enhancing the durability of the walls.
Reinforcing the joints with steel bars or mesh can improve the...
The amount of plaster that can be done by 1 mason and 1 labor depends on various factors.
The skill and experience of the mason and labor
The size and complexity of the area to be plastered
The type of plaster being used
The tools and equipment available
The time allocated for the task
The working conditions and environment
The efficiency and coordination between the mason and labor
On average, a skilled mason and labor can pl
Before starting block work, preparation involves site survey, layout marking, excavation, and foundation preparation.
Conduct a site survey to assess the ground conditions and identify any potential obstacles or hazards.
Mark the layout of the block work using strings, stakes, and levels to ensure accurate positioning.
Excavate the area where the block work will be installed, removing any existing debris or vegetation.
Pre...
posted on 4 Oct 2023
based on 1 interview
Interview experience
based on 2 reviews
Rating in categories
Electrical Supervisor
6
salaries
| ₹3.6 L/yr - ₹10.9 L/yr |
Hvac Technician
6
salaries
| ₹0.7 L/yr - ₹7.5 L/yr |
HSE Officer
6
salaries
| ₹9.6 L/yr - ₹12.6 L/yr |
Mechanical Engineer
5
salaries
| ₹6 L/yr - ₹16.8 L/yr |
Electrical Technician
5
salaries
| ₹4.4 L/yr - ₹8.4 L/yr |
Saudi Binladin Group
Eversendai
Descon Engineering
Amara Raja Infra