Filter interviews by
I appeared for an interview in Sep 2024, where I was asked the following questions.
I applied via AmbitionBox and was interviewed in Jun 2023. There were 5 interview rounds.
How long does it take to become a male nurse
What is the history of male nurse
Top trending discussions
I applied via Naukri.com and was interviewed in Oct 2020. There was 1 interview round.
I applied via Campus Placement and was interviewed before Aug 2022. There were 2 interview rounds.
posted on 8 Feb 2022
I applied via Recruitment Consulltant and was interviewed before Feb 2021. There were 3 interview rounds.
Behavior
The weight of a 25mm diameter steel bar of 4 meters length.
To calculate the weight, we need to know the density of the steel.
The density of steel is typically around 7850 kg/m^3.
Using the formula weight = volume * density, we can calculate the weight of the steel bar.
The volume of a cylindrical bar can be calculated using the formula volume = π * (diameter/2)^2 * length.
Substituting the values, we can calculate the wei
To check the right angle of walls corner, use a carpenter's square or a digital angle finder.
Use a carpenter's square by placing it against the corner of the wall and checking if the edges align perfectly.
Alternatively, use a digital angle finder to measure the angle between the two walls and ensure it is 90 degrees.
Ensure the walls are straight and plumb before checking the corner angle.
The size of a full play can vary depending on the specific production and script.
The size of a full play can range from small-scale productions with a few actors to large-scale productions with a large cast and elaborate sets.
Some plays may require a small ensemble cast, while others may have a large ensemble cast.
The size of a play can also be influenced by the number of scenes, locations, and set changes.
For example,...
Safety refers to the measures and precautions taken to prevent accidents, injuries, and hazards in the workplace.
Safety involves identifying and assessing potential risks and hazards in the workplace.
It includes implementing safety protocols, procedures, and guidelines to minimize or eliminate risks.
Safety also involves providing appropriate safety equipment and training to employees.
Regular inspections and audits are ...
Scale 1:30 refers to a ratio where 1 unit on the scale represents 30 units in real life.
Scale 1:30 is commonly used in architectural and engineering drawings.
It means that every measurement on the drawing is 30 times smaller than the actual size.
For example, if a wall is represented as 10 cm on the drawing, its actual size would be 300 cm (10 cm x 30).
In order to fix the joints of RCC walls and block walls, various methods can be used such as grouting, sealing, and reinforcement.
Grouting is the process of filling the joints with a cementitious material to provide strength and stability.
Sealing the joints with appropriate sealants helps in preventing water leakage and enhancing the durability of the walls.
Reinforcing the joints with steel bars or mesh can improve the...
The amount of plaster that can be done by 1 mason and 1 labor depends on various factors.
The skill and experience of the mason and labor
The size and complexity of the area to be plastered
The type of plaster being used
The tools and equipment available
The time allocated for the task
The working conditions and environment
The efficiency and coordination between the mason and labor
On average, a skilled mason and labor can pl
Before starting block work, preparation involves site survey, layout marking, excavation, and foundation preparation.
Conduct a site survey to assess the ground conditions and identify any potential obstacles or hazards.
Mark the layout of the block work using strings, stakes, and levels to ensure accurate positioning.
Excavate the area where the block work will be installed, removing any existing debris or vegetation.
Pre...
I applied via Recruitment Consultant and was interviewed in Oct 2020. There was 1 interview round.
I applied via Company Website and was interviewed before Oct 2021. There were 2 interview rounds.
I applied via Naukri.com and was interviewed in Sep 2020. There was 1 interview round.
HIRA stands for Hazard Identification and Risk Assessment. Hierarchy of Control Measures is a systematic approach to eliminate or minimize hazards.
HIRA is a process of identifying potential hazards and analyzing the associated risks.
Hierarchy of Control Measures is a step-by-step approach to eliminate or minimize hazards.
The hierarchy includes five levels: elimination, substitution, engineering controls, administrative...
Precautions must be taken to ensure safe lifting work.
Assess the weight of the load and ensure it is within the safe lifting limit.
Use proper lifting techniques, such as bending at the knees and keeping the back straight.
Wear appropriate personal protective equipment, such as gloves and safety shoes.
Ensure the lifting area is clear of obstacles and hazards.
Use mechanical aids, such as cranes or forklifts, for heavy loa...
posted on 25 Nov 2021
Lagging indicators measure past performance while leading indicators predict future performance.
Lagging indicators are reactive and measure the results of past actions.
Leading indicators are proactive and predict future outcomes.
Examples of lagging indicators include injury rates, lost time incidents, and workers' compensation costs.
Examples of leading indicators include safety training, safety audits, and near-miss re...
based on 2 interviews
Interview experience
based on 2 reviews
Rating in categories
Electrical Supervisor
6
salaries
| ₹3.6 L/yr - ₹10.9 L/yr |
Hvac Technician
6
salaries
| ₹0.7 L/yr - ₹7.5 L/yr |
HSE Officer
6
salaries
| ₹9.6 L/yr - ₹12.6 L/yr |
Mechanical Engineer
5
salaries
| ₹6 L/yr - ₹16.8 L/yr |
Electrical Technician
5
salaries
| ₹4.4 L/yr - ₹8.4 L/yr |
Saudi Binladin Group
Eversendai
Descon Engineering
Amara Raja Infra