Add office photos
Employer?
Claim Account for FREE

Eaton India Innovation Center

4.1
based on 258 Reviews
Filter interviews by

20+ Limasoft Interview Questions and Answers

Updated 21 Oct 2024

Q1. What is DVP and DFMEA and how are they linked to eachother ?

Ans.

DVP is Design Verification Plan and DFMEA is Design Failure Mode and Effects Analysis. They are linked as DVP tests the DFMEA.

  • DVP is a plan to verify that the design meets the requirements

  • DFMEA is a process to identify potential failures and their effects on the design

  • DVP tests the design against the potential failures identified in DFMEA

  • DFMEA helps in identifying the critical areas of the design that need to be tested in DVP

  • Both are important tools in ensuring a robust and r...read more

Add your answer

Q2. What is the difference between turbocharger and supercharger ?

Ans.

Turbocharger uses exhaust gases to spin a turbine while supercharger uses engine's crankshaft to spin a compressor.

  • Turbocharger is more efficient at higher altitudes while supercharger is more efficient at lower altitudes.

  • Turbocharger has a lag time before it kicks in while supercharger provides instant boost.

  • Turbocharger is quieter while supercharger is louder due to its mechanical nature.

  • Examples of cars with turbochargers include Volkswagen Golf GTI and Subaru WRX while ex...read more

Add your answer

Q3. Design procedure or approach for designing a cast exhaust elbow ?

Ans.

Designing a cast exhaust elbow requires a systematic approach and attention to detail.

  • Determine the material to be used for the cast

  • Analyze the exhaust system to determine the required dimensions and angles

  • Create a 3D model of the exhaust elbow using CAD software

  • Design the mold for the casting process

  • Perform simulations to ensure the design meets performance requirements

  • Test the prototype to verify performance and make necessary adjustments

Add your answer

Q4. Will u work in shift and 6 days rest all will work 5 days

Ans.

Yes, I am willing to work in shifts and have 6 days of rest while others work 5 days.

  • I am flexible with my work schedule and can adapt to different shifts.

  • Having 6 days of rest can be beneficial for my work-life balance and productivity.

  • I am willing to work extra hours or days if needed to meet project deadlines.

  • I understand the importance of teamwork and will work collaboratively with my colleagues.

  • Examples: I have previously worked in a 24/7 call center and was able to adju...read more

View 1 answer
Discover Limasoft interview dos and don'ts from real experiences

Q5. How to determine health of a transformer?

Ans.

The health of a transformer can be determined by analyzing its insulation, oil quality, and temperature.

  • Check insulation resistance using a megohmmeter

  • Analyze oil quality for signs of degradation or contamination

  • Monitor temperature to ensure it stays within safe operating limits

  • Perform regular maintenance and testing to detect any issues early

  • Consider using online monitoring systems for continuous monitoring

  • Look for signs of physical damage or corrosion on the transformer

  • Chec...read more

Add your answer

Q6. Provide an example of tolerance stack up.

Ans.

Tolerance stack up refers to the accumulation of variations in dimensions and tolerances of individual parts in an assembly.

  • Tolerance stack up can lead to issues such as interference or gaps between parts in an assembly.

  • It is important to consider both the nominal dimensions and the tolerances of each part when designing an assembly.

  • An example of tolerance stack up is when the cumulative variation in the thickness of multiple gaskets leads to a gap that affects the overall pe...read more

Add your answer
Are these interview questions helpful?

Q7. Draw the BMD for Simply supported beam?

Ans.

BMD for a simply supported beam is a graphical representation of the bending moment along the length of the beam.

  • BMD starts from zero at the supports and peaks at the center of the beam.

  • The shape of the BMD depends on the type of load and support conditions.

  • For a uniformly distributed load on a simply supported beam, the BMD will be a parabolic curve.

  • The BMD can be drawn by calculating the reactions at the supports and then plotting the bending moment at various points along ...read more

Add your answer

Q8. What is Mohr circle diagram?

Ans.

Mohr circle diagram is a graphical representation of stress transformation in materials.

  • It is used in engineering to analyze stress states and predict material failure.

  • The diagram shows the relationship between normal and shear stresses on different planes within a material.

  • It helps engineers determine the maximum and minimum principal stresses, as well as the orientation of the planes on which they act.

Add your answer
Share interview questions and help millions of jobseekers 🌟

Q9. What is buckling of column?

Ans.

Buckling of column is a phenomenon where a slender column fails due to compressive stress exceeding its critical load.

  • Buckling occurs when a column is subjected to an axial load, causing it to bend and deform laterally.

  • The critical load at which buckling occurs depends on the column's material properties, length, and cross-sectional area.

  • Buckling can lead to sudden and catastrophic failure of the column.

  • Examples of buckling can be seen in structural engineering, such as in ta...read more

Add your answer

Q10. Explain GD&T symbol and its significance

Ans.

GD&T symbol stands for Geometric Dimensioning and Tolerancing, used to define the nominal geometry of parts and specify allowable variations.

  • GD&T symbols are used to communicate design intent and control the manufacturing process

  • They include symbols for features like flatness, perpendicularity, concentricity, etc.

  • GD&T helps improve quality, reduce costs, and ensure parts are manufactured correctly

  • It allows for more detailed and precise specifications compared to traditional l...read more

Add your answer

Q11. How do you determine the accuracy metric of your algorithm?

Ans.

Accuracy metric is determined by comparing the predicted values with the actual values.

  • Calculate the number of correct predictions made by the algorithm

  • Divide the number of correct predictions by the total number of predictions made

  • Multiply the result by 100 to get the accuracy percentage

  • For example, if the algorithm made 80 correct predictions out of 100, the accuracy would be 80%

Add your answer

Q12. Explain Gate drive selection for MOSFETs?

Ans.

Gate drive selection for MOSFETs involves choosing the appropriate voltage and current levels to ensure proper switching and efficiency.

  • Consider the gate threshold voltage and gate capacitance of the MOSFET when selecting the drive voltage.

  • Choose a gate driver IC with sufficient current capability to quickly charge and discharge the gate capacitance.

  • Opt for a gate driver with features like under-voltage lockout and over-current protection for reliability.

  • Use gate resistors to...read more

Add your answer

Q13. 1. Write a prime number program 2. K6 vs Jmeter 3. Types of testing 4. have you worked on azure

Add your answer

Q14. What is demand response

Ans.

Demand response is a program that encourages consumers to reduce their electricity usage during peak hours.

  • It is a voluntary program that incentivizes consumers to reduce their energy consumption during times of high demand

  • It helps to balance the electricity grid and prevent blackouts

  • Examples include turning off non-essential appliances during peak hours or using energy-efficient appliances

  • It can also involve shifting energy usage to off-peak hours

  • Utility companies often offe...read more

Add your answer

Q15. /significance of stack-up

Ans.

Stack-up is the arrangement of different layers of materials in a PCB design to meet electrical and mechanical requirements.

  • Determines the overall thickness of the PCB

  • Affects signal integrity and impedance control

  • Influences thermal management and mechanical stability

  • Critical for meeting design specifications and performance goals

Add your answer

Q16. What is isolator

Ans.

An isolator is an electrical device used to disconnect a circuit from an active power source.

  • Isolators are used for safety purposes to ensure that electrical equipment can be safely maintained or repaired without the risk of electrocution.

  • They are often used in conjunction with circuit breakers or fuses to provide additional protection against electrical faults.

  • Isolators can be manually operated or automatically controlled, and are commonly found in industrial and commercial ...read more

Add your answer

Q17. Circuit breaker vs isolator

Ans.

Circuit breaker protects against overcurrent while isolator disconnects a circuit for maintenance.

  • Circuit breaker automatically trips when there is an overcurrent, protecting the circuit from damage.

  • Isolator is used to disconnect a circuit for maintenance or repair purposes.

  • Circuit breaker can be reset after tripping while isolator cannot be reset.

  • Circuit breaker is usually installed in series with the circuit while isolator is installed in parallel.

  • Examples of circuit breake...read more

Add your answer

Q18. How do u design a motor

Ans.

Designing a motor involves selecting the appropriate components, determining the specifications, creating a detailed schematic, and testing the prototype.

  • Select the type of motor based on the application (e.g. DC motor, AC motor)

  • Determine the required specifications such as power rating, speed, torque, and efficiency

  • Create a detailed schematic showing the layout of components and connections

  • Select the appropriate materials for the motor components (e.g. copper wire for coils,...read more

Add your answer

Q19. What is dot net program

Ans.

Dot net is a software framework developed by Microsoft for building Windows applications.

  • Dot net provides a common language runtime (CLR) that allows developers to write code in different languages such as C#, VB.NET, and F#.

  • It includes a large class library called the .NET Framework Class Library (FCL) that provides a wide range of functionality for developers.

  • Dot net also includes tools for developing and debugging applications, such as Visual Studio.

  • Examples of application...read more

Add your answer

Q20. 2) Stress Strain Curve explanation

Ans.

Stress Strain Curve explains the relationship between stress and strain in a material.

  • It shows how a material deforms under stress.

  • The curve has three regions: elastic, plastic, and fracture.

  • Elastic region is where the material returns to its original shape when stress is removed.

  • Plastic region is where the material deforms permanently.

  • Fracture region is where the material breaks.

  • The curve can be used to determine a material's strength, stiffness, and ductility.

Add your answer

Q21. 1) Procedure to design a shaft

Ans.

Designing a shaft involves several steps and considerations.

  • Determine the load and torque requirements

  • Select appropriate materials based on strength and durability

  • Calculate the shaft diameter and length

  • Consider factors such as bending, torsion, and fatigue

  • Perform stress analysis and ensure safety factors are met

  • Choose appropriate manufacturing processes

  • Test and evaluate the final product

Add your answer

Q22. Area of interests

Ans.

My areas of interest include software development, data analysis, and machine learning.

  • Software development

  • Data analysis

  • Machine learning

Add your answer

Q23. K6 vs JMETER difference

Add your answer

Q24. type of testing in details

Add your answer

Q25. Differentiate ETL vs ELT

Ans.

ETL is Extract, Transform, Load where data is extracted, transformed, and then loaded into a target system. ELT is Extract, Load, Transform where data is extracted, loaded into a target system, and then transformed.

  • ETL involves extracting data from source systems, transforming it, and then loading it into a target system.

  • ELT involves extracting data from source systems, loading it into a target system, and then transforming it as needed.

  • ETL is typically used when data needs t...read more

Add your answer

Q26. prime number program

Add your answer
Contribute & help others!
Write a review
Share interview
Contribute salary
Add office photos

Interview Process at Limasoft

based on 15 interviews in the last 1 year
Interview experience
4.2
Good
View more
Interview Tips & Stories
Ace your next interview with expert advice and inspiring stories

Top Interview Questions from Similar Companies

3.7
 • 406 Interview Questions
4.0
 • 264 Interview Questions
4.0
 • 242 Interview Questions
4.2
 • 206 Interview Questions
4.2
 • 135 Interview Questions
3.6
 • 132 Interview Questions
View all
Top Eaton India Innovation Center Interview Questions And Answers
Share an Interview
Stay ahead in your career. Get AmbitionBox app
qr-code
Helping over 1 Crore job seekers every month in choosing their right fit company
70 Lakh+

Reviews

5 Lakh+

Interviews

4 Crore+

Salaries

1 Cr+

Users/Month

Contribute to help millions
Get AmbitionBox app

Made with ❤️ in India. Trademarks belong to their respective owners. All rights reserved © 2024 Info Edge (India) Ltd.

Follow us
  • Youtube
  • Instagram
  • LinkedIn
  • Facebook
  • Twitter