Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Eaton India Innovation Center Electrical Engineer Interview Questions, Process, and Tips

Updated 3 May 2023

Eaton India Innovation Center Electrical Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Nov 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(5 Questions)

  • Q1. How to determine health of a transformer?
  • Ans. 

    The health of a transformer can be determined by analyzing its insulation, oil quality, and temperature.

    • Check insulation resistance using a megohmmeter

    • Analyze oil quality for signs of degradation or contamination

    • Monitor temperature to ensure it stays within safe operating limits

    • Perform regular maintenance and testing to detect any issues early

    • Consider using online monitoring systems for continuous monitoring

    • Look for si...

  • Answered by AI
  • Q2. What is demand response
  • Ans. 

    Demand response is a program that encourages consumers to reduce their electricity usage during peak hours.

    • It is a voluntary program that incentivizes consumers to reduce their energy consumption during times of high demand

    • It helps to balance the electricity grid and prevent blackouts

    • Examples include turning off non-essential appliances during peak hours or using energy-efficient appliances

    • It can also involve shifting ...

  • Answered by AI
  • Q3. What is isolator
  • Ans. 

    An isolator is an electrical device used to disconnect a circuit from an active power source.

    • Isolators are used for safety purposes to ensure that electrical equipment can be safely maintained or repaired without the risk of electrocution.

    • They are often used in conjunction with circuit breakers or fuses to provide additional protection against electrical faults.

    • Isolators can be manually operated or automatically contro...

  • Answered by AI
  • Q4. Circuit breaker vs isolator
  • Ans. 

    Circuit breaker protects against overcurrent while isolator disconnects a circuit for maintenance.

    • Circuit breaker automatically trips when there is an overcurrent, protecting the circuit from damage.

    • Isolator is used to disconnect a circuit for maintenance or repair purposes.

    • Circuit breaker can be reset after tripping while isolator cannot be reset.

    • Circuit breaker is usually installed in series with the circuit while is...

  • Answered by AI
  • Q5. Project explanation as it was hardware based project
Round 3 - HR 

(3 Questions)

  • Q1. What are your Strengths
  • Q2. What are your weaknesses
  • Q3. Where do you see your self in 5 years

Interview Preparation Tips

Interview preparation tips for other job seekers - Study power system protection thoroughly and prepare for HR questions beforehand

Interview questions from similar companies

I applied via Recruitment Consulltant and was interviewed before May 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Position Tolerance, Tolerance stack, Temperature Rise test, Vaccuum Circuit breaker, arc quenching,

Interview Preparation Tips

Interview preparation tips for other job seekers - Time taking process 2 month almost
Position goes on hold sometimes
They are more happy taking diversity candidates

I applied via Job Portal and was interviewed in Oct 2020. There was 1 interview round.

Interview Preparation Tips

Interview preparation tips for other job seekers - This interview was a technical one but was majorly a stress test. It lasted for about 1 hour 10 minutes. The interviewer wanted to test both my knowledge and communication skills. Most of the questions asked to me were related to my B.Tech curriculum i.e. Civil Engineer site experience related topics. He stressed a lot on the basics related to my project topic. Luckily I was able to answer most of the questions correctly. I tried to answer each question with examples and also used props on the table (like pens, paperweights, pen stands etc.) to explain my theories. It was my first offcampus interview, and I think I did pretty well for a fresher. You need to stay calm and should apply presence of mind. Please go through the job description thoroughly word-by-word and recheck your resume to ensure that you are a best-fit for the position.

Interview Questionnaire 

3 Questions

  • Q1. How many time u take any update shuttering system?
  • Ans. 

    The question is unclear and lacks context.

    • Please provide more information about the 'update shuttering system'.

    • Specify the time frame for the updates.

    • Clarify the purpose or objective of the updates.

    • Provide any relevant examples or scenarios.

  • Answered by AI
  • Q2. Why u want to work as a execution engineer? Why not any special team such as formwork team,or quality team?
  • Ans. 

    I want to work as an execution engineer because I enjoy the challenge of overseeing and coordinating all aspects of a project.

    • As an execution engineer, I would have the opportunity to work on a variety of projects and oversee all aspects of their execution.

    • I enjoy the challenge of coordinating different teams and ensuring that everything runs smoothly.

    • While working on a formwork or quality team would be valuable experi...

  • Answered by AI
  • Q3. As contractor farm Engineer in RCC which is most important? 1) Reinforcements 2)Formwork 3)Concrete And why?
  • Ans. 

    Concrete is the most important as it provides the strength and durability to the structure.

    • Concrete is the backbone of any RCC structure.

    • It provides the strength and durability to the structure.

    • Reinforcements and formwork are important too, but without concrete, they are useless.

    • Proper mix design and curing of concrete are crucial for the longevity of the structure.

  • Answered by AI

Interview Questionnaire 

1 Question

  • Q1. Technical question

I applied via Company Website and was interviewed before Apr 2020. There were 4 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Load distribution under rigid and flexible footings,water tank design, steel foundation design
  • Q2. Mix design of concrete, btech project
  • Ans. 

    Mix design of concrete and BTech project

    • Mix design involves determining the proportions of cement, water, aggregates, and admixtures to achieve desired properties of concrete

    • Factors like strength, workability, durability, and cost are considered while designing the mix

    • BTech project can involve studying the effect of different mix designs on properties of concrete or developing a new mix design

    • Examples of BTech projects...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - be well prepared with basics and if you are already experienced, be prepared with site knowledge

I applied via Walk-in and was interviewed in Dec 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. About my work experience & my self
  • Q2. Tell me about your self.

Interview Preparation Tips

Interview preparation tips for other job seekers - Always candidates have good knowledge of relevant work.and be confident about it,interviewrs always seeing your confidence level and skills.

I applied via Company Website and was interviewed in Mar 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. All question based on past work experiences.

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare all the past experience challenge and step by step your envolvement.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. PQC rectification??
Round 2 - Technical 

(1 Question)

  • Q1. BC joint cutting??
Round 3 - HR 

(1 Question)

  • Q1. Salary discussion
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Coding Test 

Was asked to write a program for linked list

Round 2 - One-on-one 

(1 Question)

  • Q1. Was asked to explain program and some logical questions
Round 3 - HR 

(1 Question)

  • Q1. Normal Salary discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Be care of what you put in your profile.
Contribute & help others!
anonymous
You can choose to be anonymous

Eaton India Innovation Center Interview FAQs

How many rounds are there in Eaton India Innovation Center Electrical Engineer interview?
Eaton India Innovation Center interview process usually has 3 rounds. The most common rounds in the Eaton India Innovation Center interview process are Resume Shortlist, Technical and HR.
What are the top questions asked in Eaton India Innovation Center Electrical Engineer interview?

Some of the top questions asked at the Eaton India Innovation Center Electrical Engineer interview -

  1. How to determine health of a transform...read more
  2. What is demand respo...read more
  3. What is isola...read more

Recently Viewed

JOBS

Browse jobs

Discover jobs you love

COMPANY BENEFITS

KNR Constructions

20 benefits

COMPANY BENEFITS

IRB Infrastructure

60 benefits

COMPANY BENEFITS

Dilip Buildcon

304 benefits

COMPANY BENEFITS

Dilip Buildcon

304 benefits

INTERVIEWS

Hummingbird Web Solutions

No Interviews

INTERVIEWS

ZingHR

No Interviews

LIST OF COMPANIES

Discover companies

Find best workplace

INTERVIEWS

Cross Country Infotech

No Interviews

INTERVIEWS

Eaton India Innovation Center

No Interviews

Tell us how to improve this page.

Eaton India Innovation Center Electrical Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
Eaton India Innovation Center Electrical Engineer Salary
based on 8 salaries
₹11 L/yr - ₹15 L/yr
210% more than the average Electrical Engineer Salary in India
View more details

Eaton India Innovation Center Electrical Engineer Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

4.0

Skill development

4.0

Work-life balance

5.0

Salary

5.0

Job security

4.0

Company culture

5.0

Promotions

4.0

Work satisfaction

Explore 1 Review and Rating
Senior Engineer
260 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
204 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Lead Engineer
114 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Associate Engineer
87 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineering Manager
71 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Eaton India Innovation Center with

GE

4.2
Compare

Siemens

4.1
Compare

Honeywell Technology Solutions

3.8
Compare

Schneider Electric

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview