Filter interviews by
I applied via Company Website and was interviewed in Aug 2022. There were 3 interview rounds.
I have extensive experience in highway engineering, including project management and design.
Managed multiple highway construction projects, ensuring adherence to budget and timeline
Designed and implemented traffic control plans for major road construction projects
Conducted traffic impact studies to assess the effects of proposed developments on existing road networks
Collaborated with multidisciplinary teams to develop ...
I applied via Walk-in and was interviewed before Dec 2022. There were 2 interview rounds.
Top trending discussions
posted on 27 Oct 2023
I applied via Walk-in and was interviewed in Sep 2023. There were 3 interview rounds.
I am Loganathan Gangadharan I Finished diploma in civil engineering with 10 years experience in Construction Field. Building background to eat not come down
The lapping length for a 12 mm steel rod used in construction is typically 60 times the diameter of the rod.
Lapping length is usually 60 times the diameter of the steel rod
For a 12 mm steel rod, the lapping length would be 12 mm x 60 = 720 mm
Lapping is done to ensure continuity and strength in the reinforcement
In Oman, commonly used footings include spread footings, strip footings, and raft footings.
Spread footings are used for individual columns or walls and distribute the load over a larger area.
Strip footings are continuous footings that support a line of columns or walls.
Raft footings are used for large or irregularly shaped structures to distribute the load over a wider area.
In Oman, due to the sandy soil conditions, de...
To rectify a broken concrete floor, materials like concrete mix, epoxy resin, or self-leveling compound can be used.
Use concrete mix to fill in the broken areas and level the floor.
Apply epoxy resin to seal cracks and strengthen the floor.
Consider using self-leveling compound for a smooth and even surface.
Ensure proper preparation and cleaning of the floor before applying any material.
Consult with a structural engineer
Concrete setting times can vary depending on factors like temperature and mix design.
Concrete typically sets within 24-48 hours, but continues to harden over time.
Factors affecting setting time include temperature, humidity, and mix design.
For example, in hot weather, concrete may set faster, while in cold weather it may take longer.
Accelerators or retarders can be added to the mix to adjust setting times as needed.
Pile heads are removed to allow for further construction or to ensure proper load transfer to the foundation.
To prepare for further construction on top of the piles
To ensure proper load transfer to the foundation
To facilitate the installation of pile caps or beams
To adjust the pile length if necessary
There are four deductions of 90 degree angles.
A 90 degree angle is formed when two lines intersect at a right angle.
In a square, all four angles are 90 degrees.
In a rectangle, opposite angles are 90 degrees.
In a right triangle, one angle is always 90 degrees.
Static load test is used to measure the load capacity of a structure under a constant load, while dynamic load test is used to measure the response of a structure to varying loads.
Static load test involves applying a constant load to a structure and measuring its response over time.
Dynamic load test involves applying varying loads to a structure to simulate real-life conditions.
Static load test helps determine the maxi...
The number of tolerance of pile load test depends on the specific project requirements and standards.
The number of tolerance of pile load test can vary based on the project specifications and standards.
Typically, a tolerance of +/- 5% to +/- 10% is considered acceptable for pile load tests.
Some projects may have more stringent tolerance requirements depending on the criticality of the structure.
It is important to refer...
Bentonite has a range density of 17-22 lb/gal and is used in civil engineering for drilling fluid, grouting, and sealing purposes.
Range density of bentonite is typically between 17-22 lb/gal.
Bentonite is used in civil engineering for various purposes such as drilling fluid, grouting, and sealing.
The range density of bentonite is important for determining its effectiveness in different applications.
Higher range density ...
posted on 29 Jan 2024
I applied via Recruitment Consulltant and was interviewed in Dec 2023. There were 2 interview rounds.
I have experience with various types of foundations including shallow foundations, deep foundations, and pile foundations.
Shallow foundations: These are used when the soil is stable and can support the load of the structure. Examples include spread footings and mat foundations.
Deep foundations: These are used when the soil near the surface is not suitable for supporting the load. Examples include pile foundations and d...
I applied via Referral and was interviewed before Sep 2019. There were 6 interview rounds.
posted on 10 Jul 2024
RDBMS stands for Relational Database Management System, a type of database management system that stores data in a structured format.
Organizes data into tables with rows and columns
Uses SQL for querying and managing data
Supports ACID properties for data consistency
Examples: MySQL, Oracle Database, SQL Server
I applied via Recruitment Consultant and was interviewed before Aug 2020. There were 5 interview rounds.
I applied via Naukri.com and was interviewed before Jan 2021. There was 1 interview round.
IS 456 is used for RCC structures.
IS 456 is the Indian Standard Code of Practice for Plain and Reinforced Concrete.
It provides guidelines for the design and construction of RCC structures.
It covers various aspects such as materials, design, construction, and quality control.
It is widely used in India for the design and construction of RCC structures.
Other relevant IS codes for RCC structures include IS 875, IS 13920, a
The file format for ETABS is .EDB
ETABS saves files in .EDB format
This format is used to store the model and analysis data
Other file formats used by ETABS include .E2K and .ET
The .E2K format is used for importing and exporting data to other software
The .ET format is used for exporting data to Excel
ETABS stands for Extended 3D Analysis of Building Systems.
ETABS is a software used for structural analysis and design of buildings.
It allows for the creation of 3D models of buildings and analysis of their behavior under various loads.
ETABS can be used for designing structures made of steel, concrete, or composite materials.
The software is widely used in the construction industry for designing high-rise buildings, brid...
based on 2 interviews
Interview experience
based on 3 reviews
Rating in categories
Assistant Manager
39
salaries
| ₹3.8 L/yr - ₹8 L/yr |
Senior Engineer
30
salaries
| ₹4.2 L/yr - ₹7.2 L/yr |
Deputy Manager
20
salaries
| ₹5 L/yr - ₹8.6 L/yr |
Senior Executive - Stores
19
salaries
| ₹3.5 L/yr - ₹4.5 L/yr |
Highway Engineer
19
salaries
| ₹3.5 L/yr - ₹5.2 L/yr |
Patel Infrastructure
CTS Consulting & Technical Support
J K Fenner
Saudi Binladin Group