Bin Omran Trading & Contracting Civil Site Engineer Interview Questions and Answers

Related to auto level and total station one more thing buliding material

Q1. About the site work
Add your answer

Q1. What is the standard &nominal size of brick in India. What are admixtures in concrete.
Ans. 
The standard size of brick in India is 190mm x 90mm x 90mm. Admixtures are chemicals added to concrete to enhance its properties.
• The nominal size of brick in India is 200mm x 100mm x 100mm, but the standard size is 190mm x 90mm x 90mm.

• Admixtures are added to concrete to improve its workability, strength, durability, and other properties.

• Examples of admixtures include water reducers, accelerators, retarders, air-entrain
Answered by AI
Add your answer
Q2. How water ratio cement associated with strength of concrete.
Ans. 
Water-cement ratio affects the strength of concrete.
• Higher water-cement ratio leads to lower strength of concrete.

• Lower water-cement ratio leads to higher strength of concrete.

• Ideal water-cement ratio is 0.45 for maximum strength.

• Excess water can cause shrinkage and cracking of concrete.

• Example: A concrete mix with water-cement ratio of 0.5 will have lower strength than a mix with ratio of 0.4.
Answered by AI
Add your answer

About personality, work schedule, team work, Kick of work, progress achieving goals.

Q1. HR looking ur first impression not just you looking good, they looking ur sences of humour,ur presentation, ur idea's.
Add your answer
Q2. If we hire to our company, what will you give to company, what's type your contribution.
Add your answer

Q1. What is meaning wcr ?
Ans. 
WCR stands for Working Capital Ratio.
• Working Capital Ratio is a financial metric used to measure a company's liquidity and ability to pay off its short-term debts.

• It is calculated by dividing a company's current assets by its current liabilities.

• A WCR of 1 or higher indicates that a company has enough current assets to cover its current liabilities.

• A WCR below 1 may indicate that a company may have difficulty paying of...read more
Answered by AI
View 3 more answers
Q2. What is civil engineers rool
Add your answer
Q3. What is the minimum thickness of grade slab
Ans. 
The minimum thickness of grade slab depends on the load it will bear and the soil conditions.
• The thickness of the grade slab should be determined by a structural engineer.

• It should be thick enough to support the weight of the structure and any additional loads.

• The soil conditions should also be taken into consideration when determining the thickness.

• For example, if the soil is soft or unstable, a thicker slab may be re...read more
Answered by AI
View 10 more answers
Q4. Can u plss define planning
Ans. 
Planning is the process of creating a roadmap to achieve a specific goal or objective.
• It involves identifying the goal or objective

• Determining the steps needed to achieve it

• Allocating resources and setting timelines

• Monitoring progress and making adjustments as necessary

• Examples include project planning, financial planning, and strategic planning
Answered by AI
Add your answer
Q5. What main roles of Qc
Add your answer

Q1. Where is the lapping zone in Beams, Columns and Slab?
Ans. 
The lapping zone in beams, columns, and slabs is the area where reinforcement bars overlap to ensure structural integrity.
• Lapping zone is typically located at the ends of beams, columns, and slabs.

• It is necessary to provide sufficient overlap of reinforcement bars to transfer loads effectively.

• The length of the lapping zone depends on the design requirements and the diameter of the reinforcement bars.

• Lapping helps in m...read more
Answered by AI
View 2 more answers
Q2. How much load does 1.5m MS prob take?
Ans. 
The load capacity of a 1.5m MS probe depends on various factors and cannot be determined without additional information.
• The load capacity of a 1.5m MS probe depends on its diameter, material composition, and design.

• The soil conditions and type of foundation also play a significant role in determining the load capacity.

• Without specific details about the probe and the project requirements, it is not possible to provide a...read more
Answered by AI
View 1 more answer
Q3. What is the unit weight of Cement mortar?
Ans. 
The unit weight of cement mortar varies depending on the mix ratio and the density of the materials used.
• The unit weight of cement mortar is typically between 2200 to 2500 kilograms per cubic meter (kg/m³).

• The unit weight can be calculated by multiplying the density of cement mortar by the volume of the material.

• The density of cement mortar is influenced by the proportions of cement, sand, and water in the mix.

• Differen...read more
Answered by AI
View 1 more answer

Q1. What is lap length of bar in beam.
Ans. 
The lap length of a bar in a beam is the length of overlap between two reinforcing bars.
• Lap length is important for ensuring the transfer of load between bars.

• It helps in maintaining the continuity of reinforcement.

• The lap length depends on factors like bar diameter, concrete strength, and design requirements.

• It is typically specified in building codes or structural design drawings.

• For example, in a beam, the lap lengt...read more
Answered by AI
View 1 more answer
Q2. Ratio of M15 grade of concrete
Ans. 
The ratio of M15 grade of concrete is 1:2:4.
• The ratio of M15 grade of concrete refers to the proportion of cement, sand, and aggregate used in the mix.

• For M15 grade concrete, the ratio is 1 part cement : 2 parts sand : 4 parts aggregate.

• This means that for every 1 unit of cement, 2 units of sand, and 4 units of aggregate are used.

• The ratio is usually represented as 1:2:4.
Answered by AI
View 1 more answer

Q1. Structure building details and process
Ans. 
Structure building involves planning, designing, and constructing buildings or other structures.
• Structural analysis and design are key components

• Materials selection is crucial for durability and strength

• Construction process includes site preparation, foundation laying, framing, and finishing

• Quality control and safety measures must be implemented throughout the process
Answered by AI
Add your answer
Q2. Tell step by step process
Ans. 
The step by step process for a Civil Site Engineer involves planning, designing, and overseeing construction projects.
• 1. Conduct site investigations and surveys to determine project feasibility.

• 2. Develop project plans and specifications, including cost estimates and timelines.

• 3. Obtain necessary permits and approvals from local authorities.

• 4. Oversee construction activities to ensure compliance with design specificati...read more
Answered by AI
Add your answer

Q1. Building construction
Add your answer
Q2. High way roads and buildings
Add your answer

Surgery in field what ever you ask not issue