Add office photos
Filter interviews by
Bhartia Infra Projects Interview Questions, Process, and Tips for Freshers
Bhartia Infra Projects Interview Experiences for Freshers
1 interview found
Selected
I applied via Referral and was interviewed before May 2022. There were 2 interview rounds.
(4 Questions)
- Q1. What is GST ? Date of GSTR returms.
- Ans.
GST stands for Goods and Services Tax. GSTR returns are filed monthly, quarterly or annually depending on the turnover.
GST is a tax reform implemented in India to replace multiple indirect taxes.
It is a destination-based tax, meaning the tax is collected where the goods or services are consumed.
GSTR returns are filed to report the details of sales, purchases, and tax paid.
The due date for GSTR returns varies based on t...
- Q2. What is TDS ? Different types of TDS sections.
- Ans.
TDS stands for Tax Deducted at Source. It is a tax collection mechanism in India.
TDS is deducted from the income of an individual or entity at the time of payment.
The deducted amount is then deposited with the government.
There are different types of TDS sections such as 192, 194, 194A, 194C, 194H, 194I, 194J, etc.
Each section specifies the rate at which TDS is to be deducted and the type of payment it applies to.
For ex...
- Q3. What is RCM ?
- Q4. How to calculate GST ?
- Ans.
GST is calculated by multiplying the taxable value of goods or services by the applicable GST rate.
Determine the taxable value of the goods or services
Identify the applicable GST rate (5%, 12%, 18%, or 28%)
Multiply the taxable value by the applicable GST rate to get the GST amount
Add the GST amount to the taxable value to get the total amount payable
Interview Preparation Tips
Accounts Associate Interview Questions asked at other Companies
Interview questions from similar companies
Selected
(2 Questions)
- Q1. About slump and cube
- Q2. About sfqp and is code
(2 Questions)
- Q1. How to do slump test
- Ans.
Slump test is a method to measure the workability of concrete by observing the consistency and flow of the concrete mix.
Prepare a slump cone by lubricating the inside surface and placing it on a smooth, flat surface.
Fill the cone with concrete in three layers, each layer tamped with a rod 25 times.
Remove excess concrete, level the top, and lift the cone vertically. Measure the slump of the concrete.
Record the slump mea...
- Q2. How to fill cube and whats you have checked on site
- Ans.
To fill a cube, ensure all sides are properly aligned and filled with the material. Check for any gaps or air pockets.
Ensure the cube mold is clean and dry before filling.
Pour the material into the mold slowly and evenly to prevent air pockets.
Use a vibrating table to help settle the material and remove any air bubbles.
Check for any leaks or cracks in the mold before filling to prevent material from leaking out.
After f...
I applied via Naukri.com and was interviewed in Jul 2024. There were 3 interview rounds.
Easy more quantitative type
Speak more and relevant to topic
(2 Questions)
- Q1. Related to your core subject
- Q2. Don't guess questions
Interview Preparation Tips
Selected
I applied via campus placement at Malla Reddy Engineering College, Ranga Reddy and was interviewed in May 2024. There were 2 interview rounds.
(2 Questions)
- Q1. Electric resistivity
- Q2. Total enf for a certain conditions
- Ans.
Total enf for a certain conditions refers to the total energy consumption for specific circumstances.
Calculate the total energy consumption by summing up the individual energy consumption values for each condition.
Consider factors such as duration, power rating, and efficiency when calculating total energy consumption.
Example: Total energy consumption for a week of running a 100W light bulb for 8 hours a day.
(2 Questions)
- Q1. Introduce yourself
- Q2. What if you didn't get hike even after working hard
User 22
I applied via Walk-in
(2 Questions)
- Q1. Revit basic commands,central file,lod,copy monitor, phasing, workset,view template
- Q2. Ask about past experience?
(1 Question)
- Q1. 2round would be tool test Input: cad files Output:modeling, documentation in revit
(2 Questions)
- Q1. Show them your college letter
- Q2. Explain about yourself and why do you want to work in the company
Graduate Trainee Interview Questions & Answers
Navayuga Engineering Company
Anonymous
posted on 12 Mar 2024
I applied via Walk-in
(4 Questions)
- Q1. What is opm? If moisture content 20 in soil what will happen
- Ans.
OPM stands for Optimum Moisture Content. If moisture content in soil is 20%, it will be at its ideal level for compaction.
OPM is the moisture content at which soil is most workable and compactable.
At 20% moisture content, soil will be at its optimum level for compaction.
Higher or lower moisture content can lead to poor compaction and stability issues.
- Q2. What is cpm and pert
- Ans.
CPM (Critical Path Method) and PERT (Program Evaluation and Review Technique) are project management tools used to plan and schedule tasks.
CPM is a deterministic model that calculates the longest path through a project's tasks to determine the minimum project duration.
PERT is a probabilistic model that uses three time estimates (optimistic, pessimistic, and most likely) to calculate the expected project duration.
Both C...
- Q3. About your project work
- Q4. Density of stee, wood, cement
- Ans.
Density of steel, wood, and cement varies due to their composition and structure.
Steel has a density of around 7850 kg/m^3
Wood has a density ranging from 400-800 kg/m^3 depending on the type of wood
Cement typically has a density of 1440 kg/m^3
Assistant Engineer Interview Questions & Answers
S P Singla Constructions
Anonymous
posted on 28 Sep 2023
Selected
I applied via Walk-in
(2 Questions)
- Q1. Can you describe a challenging engineering project you've worked on, and how did you overcome obstacles? What software and tools are you proficient in for civil engineering design and analysis? How do yo...
- Ans. Challenging Engineering Project: During my internship, I was involved in a complex bridge construction project with tight deadlines. We encountered unforeseen soil stability issues. To overcome this, I collaborated closely with geotechnical experts, adjusted the foundation design, and extended work hours. Effective communication and teamwork helped us successfully address the challenges and complete the project on ti...
- Q2. What are your long-term career goals in civil engineering, and how do you plan to achieve them? How do you handle unexpected changes or setbacks on a construction project? Can you discuss any internships...
(2 Questions)
- Q1. Can you explain the concept of load-bearing capacity in structural engineering?
- Ans.
Load-bearing capacity in structural engineering refers to the maximum load a structure can support without failing.
Load-bearing capacity is determined by factors such as material strength, design, and support conditions.
Structural engineers calculate load-bearing capacity to ensure safety and prevent structural failure.
Examples of load-bearing elements include columns, beams, and foundations.
Load-bearing capacity can b...
- Q2. What is the purpose of a geotechnical investigation, and how is it conducted?
- Ans.
A geotechnical investigation is conducted to assess the soil and rock conditions at a site for construction projects.
Determines the suitability of the site for construction
Identifies potential risks such as landslides, soil liquefaction, or sinkholes
Helps in designing foundations and earthworks
Involves drilling boreholes, taking soil samples, and conducting laboratory tests
Results in a geotechnical report with recommen
Interview Preparation Tips
Soft Skills: Develop strong communication, teamwork, and problem-solving skills. These are highly valued in the workplace and can set you apart from other candidates
Tailored Resumes and Cover Letters: Customize your
Software Developer Interview Questions & Answers
L & W Constructions
Anonymous
posted on 17 Oct 2024
Good process from management side
Interview Preparation Tips
Apprentice CAD Engineer Interview Questions & Answers
Oceaneering International
Anonymous
posted on 7 Nov 2024
Selected
I applied via Company Website and was interviewed before Nov 2023. There were 3 interview rounds.
Written test with aptitude and CAD questions. Followed by tool test on Solidworks.
(2 Questions)
- Q1. Questions about your resume.
- Q2. Questions about your projects and intership as well as some mechanical subject preference was asked followed by questions over it.
(2 Questions)
- Q1. Personal interests, hobby and questions over that.
- Q2. Long term, short term goals
Bhartia Infra Projects Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
People are getting interviews through
Interview Questions from Similar Companies
Bhartia Infra Projects Reviews and Ratings
based on 53 reviews
Rating in categories
|
Civil Site Engineer
17
salaries
|  ₹2.4 L/yr - ₹4.2 L/yr |
|
Accountant
7
salaries
| ₹1.8 L/yr - ₹7.2 L/yr |
|
Structural Engineer
7
salaries
| ₹2.5 L/yr - ₹6 L/yr |
|
Survey Engineer
6
salaries
| ₹3 L/yr - ₹3.6 L/yr |
|
Executive Accountant
6
salaries
| ₹2 L/yr - ₹3.2 L/yr |
Larsen & Toubro Limited
Reliance Infrastructure
GMR Group
IRB Infrastructure
Calculate your in-hand salary
- Home >
- Interviews >
- Bhartia Infra Projects Interview Questions >
- Bhartia Infra Projects Interview Questions for Fresher
