Upload Button Icon Add office photos

Bharti Airtel

Compare button icon Compare button icon Compare

Filter interviews by

Bharti Airtel RF Optimization Engineer Interview Questions and Answers

Updated 5 Apr 2022

Bharti Airtel RF Optimization Engineer Interview Experiences

1 interview found

Round 1 - Aptitude Test 

2G 3G 4G Technologies and Network Parameters & Electronics basics

Round 2 - Technical 

(2 Questions)

  • Q1. What is 4G parameters and explain
  • Ans. 

    4G parameters are settings that control the performance of a 4G network.

    • 4G parameters include things like handover thresholds, power control settings, and modulation schemes.

    • These settings can be adjusted to optimize network performance and improve user experience.

    • Examples of 4G parameters include RSRP, RSRQ, SINR, and MCS.

    • RSRP (Reference Signal Received Power) is a measure of the signal strength at the receiver.

    • RSRQ (...

  • Answered by AI
  • Q2. What about knowledge of MS-Office please explain
Round 3 - HR 

(7 Questions)

  • Q1. What are your salary expectations?
  • Q2. What is your family background?
  • Q3. Share details of your previous job.
  • Q4. Why should we hire you?
  • Q5. Why are you looking for a change?
  • Q6. What are your strengths and weaknesses?
  • Q7. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - Great Job great, do practice apptitude &Reasoning
Learn Technical subject

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jan 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. What is your expectations
Round 3 - Technical 

(2 Questions)

  • Q1. How to solve handover & drop call
  • Ans. 

    Handover and drop call issues can be solved by optimizing network parameters, improving coverage and capacity, and troubleshooting hardware and software problems.

    • Optimize handover parameters such as handover margin, time-to-trigger, and hysteresis

    • Improve coverage by adding more base stations or adjusting antenna tilt and azimuth

    • Increase capacity by adding more carriers or sectors

    • Troubleshoot hardware issues like faulty...

  • Answered by AI
  • Q2. Check relation with inter & intra cell term point & anchor baseline
  • Ans. 

    The relation between inter and intra cell term point and anchor baseline is important in RF optimization.

    • Inter cell term point refers to the point where the signal from one cell ends and the signal from another cell begins.

    • Intra cell term point refers to the point within a cell where the signal quality starts to degrade.

    • Anchor baseline is a reference point used to measure the performance of a network.

    • The relation betwe...

  • Answered by AI

I applied via Naukri.com and was interviewed in Mar 2021. There were 3 interview rounds.

Interview Questionnaire 

7 Questions

  • Q1. RACH PROCEDURE
  • Ans. 

    RACH procedure is used for initial access to the network by a UE.

    • RACH stands for Random Access Channel.

    • UE sends a RACH preamble to the network to request access.

    • The network responds with a RACH response message.

    • RACH procedure is used for both uplink and downlink transmission.

    • Optimizing RACH parameters can improve network performance.

  • Answered by AI
  • Q2. Handover Parameters
  • Q3. Handover events
  • Q4. How to improve DL throughout in good RF condition
  • Ans. 

    To improve DL throughput in good RF condition, optimize antenna tilt, increase sector capacity, and reduce interference.

    • Optimize antenna tilt to improve signal strength and reduce interference

    • Increase sector capacity by adding more carriers or using advanced modulation techniques

    • Reduce interference by identifying and mitigating sources of interference

    • Ensure proper network planning and optimization to maximize DL throug...

  • Answered by AI
  • Q5. How to improve VDR
  • Ans. 

    VDR can be improved by optimizing network parameters and reducing interference.

    • Optimize antenna tilt and azimuth angles

    • Adjust transmit power levels

    • Reduce interference from neighboring cells

    • Implement advanced interference cancellation techniques

    • Use frequency hopping to avoid interference

    • Deploy more base stations to improve coverage

    • Upgrade network hardware and software

    • Perform regular network audits and optimizations

  • Answered by AI
  • Q6. How to improve BLER
  • Ans. 

    To improve BLER, optimize the radio network by adjusting parameters and improving coverage.

    • Optimize radio network parameters such as power control, handover parameters, and modulation schemes

    • Improve coverage by adding more base stations or adjusting antenna tilt and orientation

    • Reduce interference by identifying and mitigating sources of interference

    • Perform regular network audits and drive tests to identify and address ...

  • Answered by AI
  • Q7. CSFB & SRVCC

Interview Preparation Tips

Interview preparation tips for other job seekers - Please be prepared your basis of RF
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. WHAT IS QCI ? explain QCI7 !
  • Ans. 

    QCI stands for QoS Class Identifier, a parameter used in LTE networks to differentiate between different levels of service quality. QCI7 is used for Internet of Things (IoT) applications.

    • QCI stands for QoS Class Identifier in LTE networks

    • It is used to differentiate between different levels of service quality

    • QCI7 specifically is used for Internet of Things (IoT) applications

  • Answered by AI
  • Q2. What is MME Drop and eNodeB Drop in LTE ?
  • Ans. 

    MME Drop and eNodeB Drop in LTE refer to the loss of connection between the mobile device and the network due to various reasons.

    • MME Drop refers to the loss of connection between the mobile device and the Mobility Management Entity (MME) in LTE network.

    • eNodeB Drop refers to the loss of connection between the mobile device and the eNodeB (base station) in LTE network.

    • These drops can occur due to factors such as poor sig...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be Calm and answer to the point.

I applied via Referral and was interviewed in Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. RADIO FREQUENCY optimization
  • Ans. 

    RF optimization involves improving the performance of wireless communication systems by adjusting various parameters.

    • RF optimization is done to improve network coverage, capacity, and quality.

    • It involves adjusting parameters such as transmit power, antenna tilt, and frequency allocation.

    • The goal is to minimize interference and maximize signal strength.

    • Tools such as drive tests, network analyzers, and simulation softwar...

  • Answered by AI
  • Q2. Base transreciver station
  • Q3. 4g projects and u900 and l900 project

Interview Preparation Tips

Interview preparation tips for other job seekers - Also find that 4g project and additional sectors microwave alignment

I appeared for an interview before Sep 2016.

Interview Questionnaire 

16 Questions

  • Q1. On what technology you have worked?
  • Ans. 

    I have worked on various technologies including Java, Python, AWS, Docker, and Kubernetes.

    • Java

    • Python

    • AWS

    • Docker

    • Kubernetes

  • Answered by AI
  • Q2. Case studies of daily operational activities?
  • Ans. 

    Daily operational activities case studies

    • Case study of optimizing production line for efficiency

    • Case study of implementing new safety protocols in a manufacturing plant

    • Case study of troubleshooting and resolving technical issues in a software development team

    • Case study of streamlining inventory management in a retail store

    • Case study of improving customer service processes in a call center

  • Answered by AI
  • Q3. What is project management?
  • Ans. 

    Project management is the process of planning, organizing, and overseeing the execution of a project from start to finish.

    • It involves defining project goals and objectives

    • Creating a project plan and timeline

    • Assigning tasks and responsibilities to team members

    • Monitoring progress and making adjustments as needed

    • Ensuring that the project is completed on time, within budget, and meets the desired quality standards

    • Examples ...

  • Answered by AI
  • Q4. What is financial and cost control during project management?
  • Ans. 

    Financial and cost control is the process of monitoring and managing project expenses to ensure they stay within budget.

    • Developing a detailed budget plan

    • Tracking expenses and comparing them to the budget plan

    • Identifying and addressing cost overruns

    • Negotiating with vendors to get the best prices

    • Implementing cost-saving measures

    • Regularly reporting on financial status to stakeholders

  • Answered by AI
  • Q5. What is resource management?
  • Ans. 

    Resource management is the process of planning, allocating, and optimizing resources to achieve organizational goals.

    • It involves identifying the resources needed for a project or task

    • Allocating those resources in an efficient manner

    • Monitoring and controlling resource usage to ensure optimal performance

    • Examples include managing personnel, finances, equipment, and time

    • Effective resource management can lead to increased p

  • Answered by AI
  • Q6. What is 2G , 3G, 4G call flow?
  • Ans. 

    2G, 3G, and 4G call flow are the processes involved in establishing and maintaining a mobile phone call.

    • 2G call flow involves circuit-switched technology and uses Time Division Multiple Access (TDMA) for voice transmission.

    • 3G call flow uses packet-switched technology and supports both voice and data transmission.

    • 4G call flow uses Long-Term Evolution (LTE) technology and provides high-speed data transmission.

    • All call fl...

  • Answered by AI
  • Q7. What is single RAN?
  • Ans. 

    Single RAN is a network architecture that allows multiple wireless technologies to be supported on a single physical network.

    • Single RAN stands for Single Radio Access Network.

    • It enables multiple wireless technologies such as 2G, 3G, 4G, and 5G to be supported on a single physical network.

    • This reduces the need for multiple hardware and software components, resulting in cost savings and simplified network management.

    • Sing...

  • Answered by AI
  • Q8. What is VOLTE?
  • Ans. 

    VOLTE stands for Voice over LTE. It is a technology that allows voice calls to be made over a 4G LTE network.

    • VOLTE uses IP packets to transmit voice calls over the LTE network

    • It provides better call quality and faster call setup times compared to traditional 2G/3G networks

    • VOLTE also allows for simultaneous voice and data usage on the same network

    • Examples of VOLTE-enabled devices include iPhone 6 and above, Samsung Gala...

  • Answered by AI
  • Q9. Difference between LTE & VOLTE?
  • Ans. 

    LTE is a standard for wireless broadband communication while VoLTE is a technology that enables voice calls over LTE network.

    • LTE stands for Long-Term Evolution and is a standard for wireless broadband communication.

    • VoLTE stands for Voice over LTE and is a technology that enables voice calls over LTE network.

    • LTE is used for data transfer while VoLTE is used for voice calls.

    • VoLTE provides better call quality and faster c...

  • Answered by AI
  • Q10. What is transport network?
  • Ans. 

    Transport network refers to the infrastructure that enables the movement of people, goods, and information.

    • Transport network includes roads, railways, airports, seaports, and communication networks.

    • It plays a crucial role in the economy by facilitating trade and commerce.

    • Examples of transport networks include the interstate highway system in the US and the European railway network.

    • Transport network planning involves op...

  • Answered by AI
  • Q11. Difference between ABIS over IP and ABIS over TDM?
  • Ans. 

    ABIS over IP and ABIS over TDM are two different methods of transmitting biometric data.

    • ABIS over IP uses internet protocol to transmit biometric data while ABIS over TDM uses time-division multiplexing.

    • ABIS over IP is more flexible and scalable than ABIS over TDM.

    • ABIS over TDM is more reliable and secure than ABIS over IP.

    • ABIS over IP is suitable for remote locations while ABIS over TDM is suitable for local networks.

    • ...

  • Answered by AI
  • Q12. Basic architecture of 2G , 3G & 4G?
  • Ans. 

    2G, 3G, and 4G are mobile network technologies with different architectures.

    • 2G uses circuit-switched technology and is primarily used for voice calls and text messaging.

    • 3G uses packet-switched technology and offers faster data transfer rates than 2G.

    • 4G uses all-IP packet-switched technology and provides even faster data transfer rates than 3G.

    • 4G also supports advanced features like VoLTE and carrier aggregation.

    • Each ge...

  • Answered by AI
  • Q13. Introduce yourself?
  • Ans. 

    I am a Senior engineer with 10+ years of experience in software development, specializing in backend systems and cloud technologies.

    • 10+ years of experience in software development

    • Specialize in backend systems and cloud technologies

    • Strong problem-solving skills

    • Experience with large-scale distributed systems

    • Proficient in programming languages such as Java, Python, and Go

  • Answered by AI
  • Q14. What are the experiences of your previous companies?
  • Ans. 

    I have worked in various companies ranging from startups to large corporations, gaining experience in diverse technologies and industries.

    • Worked in a startup where I was responsible for developing a scalable backend system using Node.js and MongoDB.

    • At a mid-sized company, I led a team in implementing CI/CD pipelines for faster and more reliable software delivery.

    • In a large corporation, I worked on optimizing performanc...

  • Answered by AI
  • Q15. Why do you want to join this company?
  • Ans. 

    I am impressed by the company's innovative projects and strong reputation in the industry.

    • Company's reputation for cutting-edge technology

    • Opportunity to work on challenging projects

    • Positive reviews from current employees

  • Answered by AI
  • Q16. What is your notice period? Is it negotiable or not?
  • Ans. 

    My notice period is currently 3 months, but it may be negotiable depending on the circumstances.

    • My current notice period is 3 months

    • I am open to negotiation depending on the circumstances

    • I can provide examples of when I have negotiated notice periods in the past

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: Submitted resume online through portal and received the call. Technical Telephonic interview was scheduled.

Tips: Resume should be as per the desired profile.

Round: Technical Interview
Experience: In this round interviewer asks basic technical questions based on the previous experiences that was mentioned in my resume.
Tips: Study all the points mentioned in the resume very deeply.

Round: Technical Interview
Tips: Given your answers to the point. It should be in brief .

Round: HR Interview
Tips: Conversation should be in proper communication. Try to convince the HR for joining. Negotiate the salary as per the profile offered to you.

Skills: Technical Skill, Communication And Confidence, Team Working Ability

Skills evaluated in this interview

I applied via Recruitment Consultant and was interviewed in May 2019. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Capacity and coverage planning, ODSC channels and its coverage radius, TAC,LAC,NAC, RRC,eRAB, S1 signalling. LTE interfaces and their functions, PRB formations and no of PRB required to support single volt...
  • Q2. Why would you like to change?

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared for odds and competent with technologies

I applied via Referral and was interviewed in Nov 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. MPLS, OSPF, BGP, ISIS

Interview Preparation Tips

Interview preparation tips for other job seekers - Never fake

I applied via Naukri.com and was interviewed in Sep 2020. There were 4 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. How to integrate the sites or the integration steps?
  • Ans. 

    Integration of sites involves identifying the systems to be integrated, defining the data flow, and implementing the integration process.

    • Identify the systems to be integrated

    • Define the data flow between the systems

    • Choose the appropriate integration method (API, ETL, etc.)

    • Develop and test the integration process

    • Deploy the integration process and monitor for errors

    • Ensure data security and compliance

    • Provide ongoing suppor

  • Answered by AI
  • Q2. What vlan?
  • Ans. 

    VLAN stands for Virtual Local Area Network and is used to logically separate a network into smaller segments.

    • VLANs are used to improve network performance and security.

    • They allow for better network management and easier troubleshooting.

    • VLANs can be configured on switches and routers.

    • Examples of VLANs include separating guest and employee networks or separating different departments within a company.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Listen carefully to interviwer & tell the answers with confidently.

Skills evaluated in this interview

I applied via Referral and was interviewed before Jan 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Telecom domine question
  • Q2. Auto Cad basics and experience on telecom and wireless based question

Interview Preparation Tips

Interview preparation tips for other job seekers - Only 2round for experience candidate

Bharti Airtel Interview FAQs

How many rounds are there in Bharti Airtel RF Optimization Engineer interview?
Bharti Airtel interview process usually has 3 rounds. The most common rounds in the Bharti Airtel interview process are Technical, HR and Aptitude Test.

Tell us how to improve this page.

Interview Questions from Similar Companies

Jio Interview Questions
4.0
 • 1.9k Interviews
Vodafone Idea Interview Questions
4.0
 • 559 Interviews
Ericsson Interview Questions
4.1
 • 414 Interviews
Nokia Interview Questions
4.1
 • 267 Interviews
BT Group Interview Questions
3.9
 • 182 Interviews
Verizon Interview Questions
4.1
 • 110 Interviews
AT&T Interview Questions
4.1
 • 53 Interviews
View all
Bharti Airtel RF Optimization Engineer Salary
based on 19 salaries
₹3 L/yr - ₹6.5 L/yr
24% less than the average RF Optimization Engineer Salary in India
View more details

Bharti Airtel RF Optimization Engineer Reviews and Ratings

based on 4 reviews

4.7/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

5.0

Salary

5.0

Job security

5.0

Company culture

5.0

Promotions

5.0

Work satisfaction

Explore 4 Reviews and Ratings
Assistant Manager
2.2k salaries
unlock blur

₹3 L/yr - ₹13 L/yr

Network Engineer
1.5k salaries
unlock blur

₹2 L/yr - ₹7 L/yr

Manager
1.4k salaries
unlock blur

₹6.2 L/yr - ₹22.6 L/yr

Territory Sales Manager
1.3k salaries
unlock blur

₹2.7 L/yr - ₹11.2 L/yr

Senior Executive
1.3k salaries
unlock blur

₹2.1 L/yr - ₹10 L/yr

Explore more salaries
Compare Bharti Airtel with

Jio

4.0
Compare

Vodafone Idea

4.0
Compare

Ericsson

4.1
Compare

Tata Communications

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview