i
Ericsson
Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards
Filter interviews by
I applied via Naukri.com and was interviewed in Jan 2023. There were 3 interview rounds.
Handover and drop call issues can be solved by optimizing network parameters, improving coverage and capacity, and troubleshooting hardware and software problems.
Optimize handover parameters such as handover margin, time-to-trigger, and hysteresis
Improve coverage by adding more base stations or adjusting antenna tilt and azimuth
Increase capacity by adding more carriers or sectors
Troubleshoot hardware issues like faulty...
The relation between inter and intra cell term point and anchor baseline is important in RF optimization.
Inter cell term point refers to the point where the signal from one cell ends and the signal from another cell begins.
Intra cell term point refers to the point within a cell where the signal quality starts to degrade.
Anchor baseline is a reference point used to measure the performance of a network.
The relation betwe...
I applied via Naukri.com and was interviewed in Mar 2021. There were 3 interview rounds.
RACH procedure is used for initial access to the network by a UE.
RACH stands for Random Access Channel.
UE sends a RACH preamble to the network to request access.
The network responds with a RACH response message.
RACH procedure is used for both uplink and downlink transmission.
Optimizing RACH parameters can improve network performance.
To improve DL throughput in good RF condition, optimize antenna tilt, increase sector capacity, and reduce interference.
Optimize antenna tilt to improve signal strength and reduce interference
Increase sector capacity by adding more carriers or using advanced modulation techniques
Reduce interference by identifying and mitigating sources of interference
Ensure proper network planning and optimization to maximize DL throug...
VDR can be improved by optimizing network parameters and reducing interference.
Optimize antenna tilt and azimuth angles
Adjust transmit power levels
Reduce interference from neighboring cells
Implement advanced interference cancellation techniques
Use frequency hopping to avoid interference
Deploy more base stations to improve coverage
Upgrade network hardware and software
Perform regular network audits and optimizations
To improve BLER, optimize the radio network by adjusting parameters and improving coverage.
Optimize radio network parameters such as power control, handover parameters, and modulation schemes
Improve coverage by adding more base stations or adjusting antenna tilt and orientation
Reduce interference by identifying and mitigating sources of interference
Perform regular network audits and drive tests to identify and address ...
Top trending discussions
I applied via Referral and was interviewed in Oct 2022. There were 2 interview rounds.
RF optimization involves improving the performance of wireless communication systems by adjusting various parameters.
RF optimization is done to improve network coverage, capacity, and quality.
It involves adjusting parameters such as transmit power, antenna tilt, and frequency allocation.
The goal is to minimize interference and maximize signal strength.
Tools such as drive tests, network analyzers, and simulation softwar...
2G 3G 4G Technologies and Network Parameters & Electronics basics
4G parameters are settings that control the performance of a 4G network.
4G parameters include things like handover thresholds, power control settings, and modulation schemes.
These settings can be adjusted to optimize network performance and improve user experience.
Examples of 4G parameters include RSRP, RSRQ, SINR, and MCS.
RSRP (Reference Signal Received Power) is a measure of the signal strength at the receiver.
RSRQ (...
QCI stands for QoS Class Identifier, a parameter used in LTE networks to differentiate between different levels of service quality. QCI7 is used for Internet of Things (IoT) applications.
QCI stands for QoS Class Identifier in LTE networks
It is used to differentiate between different levels of service quality
QCI7 specifically is used for Internet of Things (IoT) applications
MME Drop and eNodeB Drop in LTE refer to the loss of connection between the mobile device and the network due to various reasons.
MME Drop refers to the loss of connection between the mobile device and the Mobility Management Entity (MME) in LTE network.
eNodeB Drop refers to the loss of connection between the mobile device and the eNodeB (base station) in LTE network.
These drops can occur due to factors such as poor sig...
I applied via Referral and was interviewed in Nov 2020. There were 4 interview rounds.
I applied via Naukri.com and was interviewed in Sep 2020. There were 4 interview rounds.
Integration of sites involves identifying the systems to be integrated, defining the data flow, and implementing the integration process.
Identify the systems to be integrated
Define the data flow between the systems
Choose the appropriate integration method (API, ETL, etc.)
Develop and test the integration process
Deploy the integration process and monitor for errors
Ensure data security and compliance
Provide ongoing suppor
VLAN stands for Virtual Local Area Network and is used to logically separate a network into smaller segments.
VLANs are used to improve network performance and security.
They allow for better network management and easier troubleshooting.
VLANs can be configured on switches and routers.
Examples of VLANs include separating guest and employee networks or separating different departments within a company.
I applied via Approached by Company and was interviewed before Sep 2022. There were 2 interview rounds.
I applied via Company Website and was interviewed before Nov 2022. There were 3 interview rounds.
I worked as a Senior Engineer in my previous company.
Led a team of engineers in developing and implementing new software solutions
Collaborated with cross-functional teams to ensure project success
Designed and implemented scalable and efficient code
Participated in code reviews and provided constructive feedback
Mentored junior engineers and facilitated their professional growth
based on 1 interview
Interview experience
based on 60 reviews
Rating in categories
Senior Solution Integrator
2.4k
salaries
| ₹6.5 L/yr - ₹22 L/yr |
Solution Architect
2.2k
salaries
| ₹13 L/yr - ₹39 L/yr |
Senior Engineer
2.2k
salaries
| ₹6.4 L/yr - ₹19 L/yr |
Network Engineer
1.8k
salaries
| ₹2.4 L/yr - ₹9.5 L/yr |
Solution Integrator
1.7k
salaries
| ₹4 L/yr - ₹13.5 L/yr |
Jio
Vodafone Idea
Bharti Airtel
Tata Communications