Upload Button Icon Add office photos

Filter interviews by

Best Group Interview Questions, Process, and Tips

Updated 15 Oct 2024

Top Best Group Interview Questions and Answers

Best Group Interview Experiences

Popular Designations

3 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Sep 2024. There was 1 interview round.

Round 1 - Technical 

(6 Questions)

  • Q1. How to plastic Wall thickness decide?
  • Ans. 

    Plastic wall thickness is decided based on factors like material properties, part geometry, and manufacturing process.

    • Consider material properties such as strength, flexibility, and cost

    • Evaluate part geometry to ensure structural integrity and proper function

    • Take into account the manufacturing process to determine moldability and cost-effectiveness

  • Answered by AI
  • Q2. Plastic shrinkage?
  • Q3. Plastic tolerance chart standard?
  • Ans. 

    Plastic tolerance chart standard provides guidelines for acceptable variations in dimensions for plastic parts.

    • Plastic tolerance charts are based on the material type, manufacturing process, and part design

    • They specify the acceptable range of dimensions for features like thickness, hole diameter, and length

    • Tolerance values are typically expressed in +/- mm or percentage of the nominal dimension

    • Common standards include ...

  • Answered by AI
  • Q4. How much plastic tolerance are required in different parts?
  • Ans. 

    Plastic tolerance requirements vary depending on the specific part and its function.

    • Plastic tolerance is typically specified in the design phase based on factors like material properties, part function, and assembly requirements.

    • Tighter tolerances are often needed for parts that require precise fits or interfaces.

    • Looser tolerances may be acceptable for parts that do not have critical dimensions or functional requiremen...

  • Answered by AI
  • Q5. Plastic material?
  • Q6. How to control plastic detects?
  • Ans. 

    Plastic defects can be controlled through proper quality control measures and process optimization.

    • Implement regular quality checks during production process

    • Optimize processing parameters such as temperature, pressure, and cooling rate

    • Train staff on proper handling and maintenance of equipment

    • Utilize advanced technologies like sensors and automated inspection systems

    • Collaborate with suppliers to ensure high-quality raw

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Best Group Design Engineer interview:
  • Plastic Molding
  • Plastic Product Design
  • Injection Moulding
  • Solid Works
  • CATIA
Interview preparation tips for other job seekers - - Prepare plastic part related design considerations.
- Injection molding
Cad test on solid works/catia?

Yes, I am selected but don't joined.

Design Engineer Interview Questions asked at other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel engine and Diesel in petrol engone.
View answer (5)
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
-

I applied via Recruitment Consulltant and was interviewed in Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Design knowledge of gd&t
  • Q2. Knowledge of welding process

Interview Preparation Tips

Interview preparation tips for other job seekers - Software knowledge must and process knowledge required

Design Engineer Interview Questions asked at other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel engine and Diesel in petrol engone.
View answer (5)

Interview Questionnaire 

1 Question

  • Q1. Why does it take so much deduction in CTC
  • Ans. 

    CTC includes various components like basic salary, allowances, and benefits.

    • CTC includes various components like basic salary, allowances, and benefits

    • Employer contribution to PF, gratuity, and insurance are also included in CTC

    • CTC is a comprehensive package that reflects the total cost of employing an individual

    • Deductions like taxes, PF contribution, and insurance premiums are subtracted from CTC to arrive at the take...

  • Answered by AI

Senior Engineer Interview Questions asked at other Companies

Q1. what is the meaning of M in M20,M25,M30 grade of concrete?
View answer (57)

Jobs at Best Group

View all

Interview questions from similar companies

Interview Questionnaire 

6 Questions

  • Q1. 1.Tell me about your self?
  • Q2. 2.Previous company KRA
  • Ans. 

    Developed new product designs, improved existing designs, conducted testing and analysis, collaborated with cross-functional teams.

    • Designed new products to meet customer requirements

    • Improved existing product designs for better performance

    • Conducted testing and analysis to ensure product quality

    • Collaborated with cross-functional teams for project success

  • Answered by AI
  • Q3. Design rules
  • Q4. Plastic defects and features
  • Q5. Automotive structure
  • Q6. CAD Tool test
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. AES INSTALLATION OF AIRCRTAFT
  • Ans. 

    AES installation of aircraft involves the integration of advanced electronic systems for improved performance and safety.

    • AES stands for Aircraft Electrical Systems, which includes components like generators, batteries, and wiring.

    • Installation process involves careful planning, wiring, testing, and integration with other aircraft systems.

    • Advanced electronic systems enhance aircraft performance, efficiency, and safety.

    • Ex...

  • Answered by AI
Round 1 - Technical 

(1 Question)

  • Q1. How can you define the Difference between a slope and a Gradient
  • Ans. 

    A slope is the steepness of a surface while a gradient is the rate of change of a variable.

    • Slope refers to the angle of inclination of a surface, while gradient refers to the change in elevation or value of a variable over a distance.

    • Slope is measured in degrees or percentage, while gradient is measured in units of the variable per unit of distance.

    • For example, the slope of a hill is 30 degrees, while the gradient of t...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - it was good Pay for freshers, hopefully packge is different for different positions thank you

I applied via Campus Placement and was interviewed in Apr 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Easy questions was there.like si ci and percentage.and permutations and combinations

Round 3 - Technical 

(2 Questions)

  • Q1. Basic questions on design, questions based on cad cam,catia creo,ansys
  • Q2. What is engineering drawing? What are the types of fits and tolerance? GD and T?
  • Ans. 

    Engineering drawing is a graphical representation of an object or system.

    • Types of fits: clearance fit, interference fit, transition fit

    • Tolerance: the allowable variation in a dimension

    • GD&T: Geometric Dimensioning and Tolerancing, a system for defining and communicating engineering tolerances

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Always wear formal dress while interview.
Try to answer each and every question.

Skills evaluated in this interview

Round 1 - Technical 

(1 Question)

  • Q1. Explain GD T and uses
  • Ans. 

    GD&T is a system of symbols and rules used to define and communicate engineering tolerances and specifications.

    • GD&T stands for Geometric Dimensioning and Tolerancing

    • It is used to ensure that parts fit together and function properly

    • GD&T uses symbols to communicate tolerances and specifications

    • It is commonly used in manufacturing and engineering industries

    • Examples of GD&T symbols include concentricity, perpendicularity,

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Study well All the best . Be confident

Skills evaluated in this interview

Design Engineer Interview Questions & Answers

Wipro user image Rajitha Vankadara

posted on 26 Apr 2022

I applied via Naukri.com and was interviewed in Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Logical thinking

Interview Preparation Tips

Topics to prepare for Wipro Design Engineer interview:
  • Self introduction
  • Hobbies
  • Family background
  • Logical questions
  • General questions
  • Related job questions
  • About company
Interview preparation tips for other job seekers - The job is very important in life because to gain knowledge and live ourselves. To protect without depending on others.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Mar 2024. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. GD&t starigtness and flatness

Best Group Interview FAQs

How many rounds are there in Best Group interview?
Best Group interview process usually has 1-2 rounds. The most common rounds in the Best Group interview process are Technical and Resume Shortlist.
How to prepare for Best Group interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Best Group. The most common topics and skills that interviewers at Best Group expect are Sales, Marketing, Communication Skills, Apparel Industry and Deeds.
What are the top questions asked in Best Group interview?

Some of the top questions asked at the Best Group interview -

  1. How much plastic tolerance are required in different par...read more
  2. How to plastic Wall thickness deci...read more
  3. How to control plastic detec...read more

Tell us how to improve this page.

Best Group Interview Process

based on 3 interviews

Interview experience

3.7
  
Good
View more

Interview Questions from Similar Companies

Infosys Interview Questions
3.6
 • 7.5k Interviews
Wipro Interview Questions
3.7
 • 5.6k Interviews
HDFC Bank Interview Questions
3.9
 • 2.1k Interviews
ITC Interview Questions
3.9
 • 546 Interviews
Tata Group Interview Questions
4.2
 • 358 Interviews
View all

Best Group Reviews and Ratings

based on 19 reviews

3.5/5

Rating in categories

3.2

Skill development

3.0

Work-life balance

3.1

Salary

3.0

Job security

3.2

Company culture

3.0

Promotions

2.7

Work satisfaction

Explore 19 Reviews and Ratings
Sales & Marketing Executive - Female

New Delhi

2-5 Yrs

Not Disclosed

Explore more jobs
Senior Engineer
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Production Engineer
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Project Manager
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

General Manager Finance & Accounts
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Account Assistant
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Best Group with

Reliance Industries

4.0
Compare

Tata Group

4.2
Compare

Aditya Birla Group

4.1
Compare

Hindustan Unilever

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview