Add office photos
Filter interviews by
Atlantis Lab Design Engineer Interview Questions and Answers
Atlantis Lab Design Engineer Interview Experiences
2 interviews found
Pratik Raut
Selected
I applied via Naukri.com and was interviewed in Jan 2024. There was 1 interview round.
(2 Questions)
- Q1. Basic welding, Gd&t, manufacturing processes
- Q2. Tool test will be taken
I applied via Naukri.com and was interviewed in Dec 2021. There were 4 interview rounds.
(1 Question)
- Q1. Experience related, Material Property, Stress-Strain diagram, welding Symbols and Processes, Sheet metal design related questions like What is K factor, what is neutral axis
(1 Question)
- Q1. Sheet metal component for CAD test
- Ans.
A sheet metal component needs to be designed using CAD software for testing purposes.
Understand the specifications and requirements of the component
Choose the appropriate sheet metal material and thickness
Create a 2D sketch of the component
Use sheet metal tools to add bends, flanges, and other features
Add necessary cutouts and holes
Check for interference and collisions
Export the design in the required file format
(1 Question)
- Q1. Final Manager round was there where mostly questions were from my resume and what responsibilities I had in previous organisation like some welding, fabrication related questions, Material Property
Interview Preparation Tips
- Inventor
- SAP
- Vault
Design Engineer Jobs at Atlantis Lab
Top trending discussions
Interview questions from similar companies
I was interviewed in Nov 2024.
(4 Questions)
- Q1. Wind calculation as per IS code
- Ans.
The procedure for wind calculation as per IS code involves determining the design wind speed, selecting the appropriate terrain category, and calculating the wind pressure.
Determine the design wind speed based on the location and height of the structure.
Select the appropriate terrain category (rural, urban, etc.) as per IS code guidelines.
Calculate the wind pressure using the formula provided in the IS code.
Consider fa...
- Q2. SFD and BMD of cantilever beam
- Q3. Staad model for fixed pole
- Ans.
A STAAD model for a fixed pole is a structural analysis and design model used to determine the stability and strength of a pole that is fixed in place.
In a STAAD model for a fixed pole, the pole is typically modeled as a vertical member with fixed supports at the base.
The model considers factors such as wind loads, dead loads, and any other relevant loads that may act on the pole.
The analysis helps in determining the s...
- Q4. Design of Square base plate
- Ans.
Key considerations in designing a square base plate
Ensure the base plate is large enough to support the load without excessive deflection
Select appropriate material and thickness to meet structural requirements
Consider the connection details for attaching the base plate to the structure
Account for any potential corrosion or environmental factors that may affect the base plate
Include provisions for anchor bolts or other...
Interview Preparation Tips
Design Engineer Interview Questions & Answers
Crane Process Flow Technologies India
Vrushabh Chute
posted on 11 Jan 2025
(2 Questions)
- Q1. Questions related to core mechanical engg
- Q2. Product related questions
I applied via Approached by Company and was interviewed in Jun 2024. There was 1 interview round.
(7 Questions)
- Q1. First angle and third angle symbol
- Ans.
First angle and third angle symbols are used in engineering drawings to indicate the orientation of the views.
First angle projection is commonly used in Europe and Asia, where the top view is placed below the front view.
Third angle projection is commonly used in North America, where the top view is placed above the front view.
The symbol for first angle projection is a triangle with the number 1 inside, while the symbol...
- Q2. Welding symbols
- Q3. Types of gears and bearings
- Ans.
Types of gears include spur, helical, bevel, worm, rack and pinion. Types of bearings include ball, roller, plain, and fluid bearings.
Types of gears: spur, helical, bevel, worm, rack and pinion
Types of bearings: ball, roller, plain, fluid
- Q4. Four Heat treatment process name
- Ans.
Four common heat treatment processes are annealing, quenching, tempering, and normalizing.
Annealing involves heating the material to a specific temperature and then slowly cooling it to relieve internal stresses and increase ductility.
Quenching is a rapid cooling process used to harden materials by forming a martensitic structure.
Tempering is a heat treatment process that involves reheating the quenched material to a s...
- Q5. Welding,brazing and soldering difference between them.
- Ans.
Welding joins two metal pieces by melting them together, brazing joins them with a filler metal at lower temperatures, and soldering joins them with an even lower melting point filler metal.
Welding involves melting the base metals and adding a filler material to create a strong joint, typically at high temperatures.
Brazing uses a filler metal with a melting point above 450°C but below the melting point of the base meta...
- Q6. CSK bolt drawing
- Q7. Tpi and bsp dull form
Selected
I applied via Job Portal and was interviewed before Oct 2023. There was 1 interview round.
(5 Questions)
- Q1. Basics regarding pumps and hydraulics.
- Q2. Prepare for basis hydraulic laws like Pascals Law, Beranulies Law ect.
- Q3. Basics of Hydraulics
- Q4. Prepare for Bearnualies Law
- Q5. Prepare for Pascals law
I applied via Recruitment Consulltant
(1 Question)
- Q1. Understanding of drawing, Different standards, norms .
(2 Questions)
- Q1. Drawing reading
- Q2. Sensor details , connection types
(2 Questions)
- Q1. Salary discussion
- Q2. Joining period, negotiation
Interview Preparation Tips
Selected
I applied via Recruitment Consulltant and was interviewed before Jun 2022. There were 5 interview rounds.
(1 Question)
- Q1. About your last company
Technical questions and job description
(1 Question)
- Q1. Test on different software
(1 Question)
- Q1. Salary discussion about ctc
Interview Preparation Tips
Design Engineer Interview Questions & Answers
Armstrong Machine Builders
Anonymous
posted on 24 May 2021
Interview Questionnaire
11 Questions
- Q1. Why leave a current job?
- Q2. Why you to join the organization?
- Q3. What is gear ratio?
- Ans.
Gear ratio is the ratio of the number of teeth on the driving gear to the number of teeth on the driven gear.
Gear ratio determines the speed and torque relationship between two gears.
It is calculated by dividing the number of teeth on the driving gear by the number of teeth on the driven gear.
A gear ratio greater than 1 indicates a reduction in speed and an increase in torque, while a ratio less than 1 indicates an inc...
- Q4. Symbol of First and third angle method?
- Ans.
The symbol of first angle method is a triangle with the vertex pointing downwards. The symbol of third angle method is a triangle with the vertex pointing upwards.
First angle method is commonly used in Europe and Asia while third angle method is commonly used in North America.
In first angle method, the object is placed in the first quadrant while in third angle method, the object is placed in the third quadrant.
The sym...
- Q5. What is a value of K factor?
- Ans.
The K factor is a value used in sheet metal design to determine the amount of springback that occurs during bending.
The K factor is a ratio that relates the neutral axis to the material thickness.
It is used to calculate the bend allowance and bend deduction in sheet metal bending operations.
A higher K factor indicates more springback, while a lower K factor indicates less springback.
Different materials and bending proc...
- Q6. What is spring back effect?
- Ans.
Spring back effect is the tendency of a material to return to its original shape after being deformed.
Spring back effect occurs when a material is bent or stretched and then released, causing it to return to its original shape.
It is commonly observed in materials like metals and polymers.
The amount of spring back depends on the material's elasticity and the magnitude of the deformation.
Spring back can be a desirable or...
- Q7. What do you mistakes in previous company?
- Q8. Are you comfort for do work 12+ hours?
- Q9. How much time you will taken to be a proficiency in inventor?
- Q10. Explain machining operations of given job?
- Ans.
Machining operations involve using various tools and techniques to shape and cut raw materials into the desired shape and size.
The job may involve using lathes, milling machines, grinders, or other specialized equipment.
The machinist must carefully measure and mark the material before cutting or shaping it.
The machinist may need to use different cutting tools or techniques depending on the material being worked on.
Exam...
- Q11. Type of gearboxes?
- Ans.
There are various types of gearboxes including spur, helical, bevel, worm, planetary, and cycloidal.
Spur gearboxes have straight teeth and are the simplest type.
Helical gearboxes have angled teeth and are quieter than spur gearboxes.
Bevel gearboxes are used for changing the direction of power transmission.
Worm gearboxes have a screw-like gear and are used for high reduction ratios.
Planetary gearboxes have multiple gear...
Selected
(2 Questions)
- Q1. Stress Strain curve
- Q2. IS codes related to steel structures
Atlantis Lab Interview FAQs
Tell us how to improve this page.
Atlantis Lab Interviews By Designations
Interview Questions for Popular Designations
- Mechanical Engg. Design Interview Questions
- Senior Design Engineer Interview Questions
- Electrical Design Engineer Interview Questions
- Structural Design Engineer Interview Questions
- Piping Designer Interview Questions
- Auto CAD Designer Interview Questions
- Junior Design Engineer Interview Questions
- Hardware Design Engineer Interview Questions
- Show more
Atlantis Lab Design Engineer Interview Process
based on 3 interviews
Interview experience
Design Engineer Interview Questions from Similar Companies
Atlantis Lab Design Engineer Reviews and Ratings
based on 34 reviews
Rating in categories
|
Design Engineer
89
salaries
|  ₹1.8 L/yr - ₹6.5 L/yr |
|
Senior Design Engineer
14
salaries
| ₹5.5 L/yr - ₹9.1 L/yr |
|
Mechanical Engg. Design
9
salaries
| ₹2.5 L/yr - ₹8.5 L/yr |
|
Product Design Engineer
6
salaries
| ₹3 L/yr - ₹5.1 L/yr |
|
HR Executive
5
salaries
| ₹2 L/yr - ₹2.9 L/yr |
TCS
Infosys
Wipro
HCLTech
- Home >
- Interviews >
- Atlantis Lab Interview Questions >
- Atlantis Lab Design Engineer Interview Questions
