Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Assystem Trainee Design Engineer Interview Questions and Answers

Updated 21 Mar 2023

Assystem Trainee Design Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(3 Questions)

  • Q1. What is the purpose of cooling tower in power plant
  • Ans. 

    Cooling tower in power plant is used to remove excess heat from the water used in the cooling system.

    • Cooling tower helps in maintaining the temperature of water used in the cooling system.

    • It removes excess heat from the water and releases it into the atmosphere.

    • This helps in preventing overheating of the equipment and ensures efficient operation.

    • Examples of cooling towers include natural draft, mechanical draft, and hy

  • Answered by AI
  • Q2. Different types of cooling towers used in power plants
  • Ans. 

    Cooling towers are used in power plants to remove excess heat from the process water.

    • Natural draft cooling towers

    • Mechanical draft cooling towers

    • Crossflow cooling towers

    • Counterflow cooling towers

    • Wet cooling towers

    • Dry cooling towers

  • Answered by AI
  • Q3. What is the purpose of Chimney in the Power Plant
  • Ans. 

    Chimney in power plant is used to release the exhaust gases produced during the combustion process.

    • Chimney helps in maintaining the air quality by releasing the harmful gases at a higher altitude.

    • It prevents the accumulation of toxic gases in the plant and surrounding areas.

    • The height of the chimney is designed based on the amount of gases produced and the wind speed in the area.

    • Chimneys can also be equipped with scrub...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Stay cool and Stick to the basics, Brush out the fundamentals for the sector we are applying and understand the business of the company
For example: Chimney (Energy vertical): Civil & structural fundamentals in case of tall structures to be focused

Interview questions from similar companies

Interview Preparation Tips

Round: Test
Experience: For aptitude focus on time;I mean to solve the problem is not a big deal ..but to solve it within the time is required...do less but accurate ...
Tips: Tips are many ..im feeling lazy any body want to discuss can call me XXXXX
Total Questions: 30

Skills:
College Name: NIT Bhopal

Interview Questionnaire 

2 Questions

  • Q1. Networking Questions
  • Q2. General questions about yourself or family

Interview Preparation Tips

Round: Test
Experience: English Grammar
Duration: 30 minutes
Total Questions: 20

Round: Group Discussion
Experience: Can be a GD or ask each person to speak on different topics
Duration: 30 minutes

Round: Technical Interview
Experience: TCP/IP model ; OSI model ; Private and Public IP ; Any specific subject that you've mentioned

College Name: GTBIT

I was interviewed in Jun 2016.

Interview Questionnaire 

1 Question

  • Q1. OSI MODEL, TCP/IP , Difference between Public and private address, MD5 hashstring, Octal to Binary conversion
  • Ans. 

    Technical questions related to networking and cryptography.

    • OSI model has 7 layers, TCP/IP has 4 layers

    • Public addresses are routable on the internet, private addresses are used within a private network

    • MD5 hashstring is a cryptographic hash function used for data integrity and security

    • Octal to binary conversion involves converting each octal digit to a 3-bit binary number

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Grammar questions were there in it.
Duration: 30 minutes
Total Questions: 20

Round: Group Discussion
Duration: 30 minutes

College Name: Ajay Kumar Garg Engineering College, Ghaziabad

Interview Questionnaire 

14 Questions

  • Q1. Why do you want to join TECH-M?
  • Ans. 

    I want to join TECH-M because of their innovative projects and strong reputation in the industry.

    • Innovative projects at TECH-M attract me

    • Strong reputation in the industry

    • Opportunities for growth and learning

    • Positive reviews from current employees

  • Answered by AI
  • Q2. Did you do any projects in your engineering tenure and what were their purposes?
  • Ans. 

    Yes, I completed a project on designing a solar-powered irrigation system to improve water efficiency in agriculture.

    • Designed a solar-powered irrigation system to reduce dependency on grid electricity

    • Implemented sensors to monitor soil moisture levels and automate watering

    • The purpose was to improve water efficiency in agriculture and reduce operational costs

    • Conducted field tests to validate the system's effectiveness

    • Pr...

  • Answered by AI
  • Q3. How can the project be modified?
  • Ans. 

    The project can be modified by identifying the areas that need improvement and implementing changes accordingly.

    • Identify the areas that need improvement

    • Analyze the impact of the proposed modifications

    • Ensure that the modifications align with the project goals

    • Communicate the modifications to all stakeholders

    • Implement the modifications and monitor their effectiveness

  • Answered by AI
  • Q4. Explain the LED logic?
  • Ans. 

    LED logic refers to the way in which light emitting diodes function and produce light.

    • LEDs are semiconductor devices that emit light when a current is passed through them

    • They have a positive and negative terminal, and the current flows from the positive to the negative terminal

    • The color of the light emitted depends on the material used in the LED

    • LEDs are commonly used in lighting, displays, and indicators

  • Answered by AI
  • Q5. Are you flexible with the location and job timings?
  • Ans. 

    Yes, I am flexible with both location and job timings.

    • I am open to relocating for the job if required

    • I am willing to adjust my schedule to meet the job timings

    • I understand the importance of flexibility in a new role

  • Answered by AI
  • Q6. Did you visit the TECH-M website and what did you find is most catchy about it?
  • Ans. 

    Yes, I visited the TECH-M website and found their interactive virtual tour to be the most catchy feature.

    • Interactive virtual tour is engaging and informative

    • User-friendly interface makes navigation easy

    • Wide range of products and services showcased

    • Testimonials and case studies provide credibility

  • Answered by AI
  • Q7. Are there any limitations for a sector that we would be alloting to you?
  • Ans. 

    Yes, there may be limitations in terms of experience, knowledge, resources, and regulations for a sector that I would be allotted.

    • Experience: I may have limited experience in a particular sector which could impact my performance.

    • Knowledge: I may not have in-depth knowledge about certain aspects of the sector, leading to limitations in decision-making.

    • Resources: Limited resources such as budget, manpower, or technology ...

  • Answered by AI
  • Q8. Why TECH-M?
  • Ans. 

    TECH-M is a leading company in the engineering industry known for its innovative projects and supportive work culture.

    • TECH-M has a strong reputation for cutting-edge technology and innovation.

    • The company offers excellent training and development opportunities for graduate engineers.

    • TECH-M has a supportive work culture that encourages growth and collaboration.

    • The company has a track record of successful projects in vari...

  • Answered by AI
  • Q9. What is the difference between centripital and centrifugal force?
  • Ans. 

    Centripetal force pulls an object towards the center of a circular path, while centrifugal force pushes an object away from the center.

    • Centripetal force is directed towards the center of rotation, while centrifugal force is directed away from the center.

    • Centripetal force is responsible for keeping an object in circular motion, while centrifugal force is experienced by the object moving in a circular path.

    • Centripetal fo...

  • Answered by AI
  • Q10. Which was your favourite subject in 11th and 12th?
  • Ans. 

    My favorite subject in 11th and 12th was Physics.

    • I enjoyed learning about the laws of motion and how they apply to real-life situations.

    • Physics helped me understand the world around me better and sparked my interest in engineering.

    • I excelled in topics like electricity, magnetism, and optics.

    • Practical experiments in Physics labs were always fascinating to me.

  • Answered by AI
  • Q11. What is vernier caliper?
  • Ans. 

    A vernier caliper is a measuring tool used to measure the internal and external dimensions of an object with high accuracy.

    • Consists of two jaws, one fixed and one movable

    • Has a main scale and a vernier scale for precise measurements

    • Can measure length, depth, and thickness

    • Used in engineering, machining, and woodworking

    • Example: measuring the diameter of a bolt or the thickness of a sheet of metal

  • Answered by AI
  • Q12. What are the laws of motion?
  • Ans. 

    The laws of motion describe the behavior of objects in motion.

    • The first law states that an object at rest will remain at rest, and an object in motion will remain in motion at a constant velocity, unless acted upon by an external force.

    • The second law states that the force acting on an object is equal to its mass times its acceleration.

    • The third law states that for every action, there is an equal and opposite reaction.

    • E...

  • Answered by AI
  • Q13. Whatever we learn, if we forget it then it is waste according to me what is your take on this?
  • Q14. Are you ready to relocate?
  • Ans. 

    Yes, I am open to relocating for the right opportunity.

    • I am willing to relocate for career growth and new experiences.

    • I have no ties that would prevent me from moving to a new location.

    • I am excited about the prospect of living in a new city or country.

    • I understand that relocation may be necessary for certain job opportunities.

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: The number of questions are way too much to be solved in the given time. I dont exactly remember the number, but it was brain exhausting. Some are very doable and some need a alert mind. The result is immediately displayed after the test is over.

Only 18 people could qualify the aptitude test.
Tips: Try completing all the questions since there is no negative marking and you have the probability of scoring more.
They dont have a total cut off, rather Tech-M has sectional cut off system, so in each section you got to be doing well.
One has to be very attentive to all the questions and answer to the best of your ability. Also time managment needs to be taken care of inorder to complete the test.

Round: Essay Round
Experience: After the aptitude test is qualified , you immediately receive greetings on screen and you are asked to step forward for the next round. In this a topic is given on the spot and you are expected to write an essay within 10 minutes in not more than 1200 words.
Out of 18, 15 students got selected after this essay round.
Tips: One needs to be a creative thinker and that too a fast one, you ought to decide the starting of the essay, its main body and the concluding phrase. start writing fast on a sharp and attentive mind. Try not to commit spelling mistakes since the essay is also software checked.

Round: Technical Interview
Experience: They always have a question ready as soon as you are done with answering the previous one. I njoyed it and realised that i was actually good at technical knowledge which i thought the other way.
The interview was most about the second year project (may be they had a pre=knowledge about it), they put up certain condition and ask you to deliver the necessary modifications required in your project to satisfy the condition.
Out of 15, 4 got eliminated in the technical round.
Tips: U need to be confident and contended. you cannot hit around the bush, if you dont know any answer say it straight. go prepared with your project knowledge in and out... concepts that follow it, its modification possibilities, purpose of choosing it, etc.

Round: HR Interview
Experience: The HR interview is supposed to be casual interview, but nothing is easy when its TECH-M. They asked any question out of blue. I still njoyed itfor i knew i spoke what i felt and we debated and discussed on certain topics. I took it more as a discussion about revealing my thoughts rather than as an interview, but in a formal sense.
Tips: You be smart and intellegent at the approximate answers that you will be delivering. U must not make self contradictory statements, stick to what you believ and speak the same. Confidence is a vital point again!
ALL THE BEST!!!

General Tips: Time management and damn awesome linguistic skills need to be accomplished.
Be confident and true while the interview process.
Skill Tips: Strong english communication writing as well as verbal is of utmost importance.
Your ability to react to certain situations is what tested in the interviews.
Be contended and confident. Prepare well. use apps for aptitude test prep.
Skills: Ability To Think Of Creative Solutions, Technical Skill And Speaking Skill, Confidence, Writing Skills, Verbal Communication Skills, Alertness, Intelligence,
College Name: JNEC Aurangabad
Motivation: It is an multinational company having its chambers along the longitudes and latitudes of the globe. It is one of the top 5 leading It solution companies and have various technical and non-technical sectors under its umbrella. There is a lot of scope of development since you get the projects at a faster rate.
Funny Moments: the qs in the HR intrview that occured was that the interviewer said he was good in physics learnt and spent a lot of time in his 11th and 12th while learning it but now he does not remember any of it. So according to him it was waste if you learn something and dont remember later.
whereas my take was that, when you try to understand and learn a thing you use your brain, so there is certain kind of transformations in the brain in a progressive manner. so even if we forget the learnt part, the brain is trained in someway. like when we do maths, we might not remember formulas or theory but the brain is trained to manipulate in some way.

this debate went for quite a while in a comic way, since the interviewer said he found it amusing the way i said it transforms and all :)

Interview Questionnaire 

5 Questions

  • Q1. General questions relating to resume
  • Q2. Projects done in college
  • Ans. 

    I completed multiple projects during my college years, including a robotic arm prototype and a sustainable energy system design.

    • Developed a robotic arm prototype using Arduino and sensors

    • Designed a sustainable energy system for a campus building

    • Collaborated with team members to implement innovative solutions

    • Presented projects at college exhibitions and competitions

  • Answered by AI
  • Q3. DBMS :- types of keys, normalization and was asked to draw ER diagram of my DBMS project.
  • Q4. DFS :- basics questions like what are stacks and queue
  • Q5. General questions about myself.

Interview Preparation Tips

Round: Test
Experience: Test was arranged by amcat. It was easy, standard questions were asked.
Duration: 1 hour 30 minutes
Total Questions: 25

Round: Technical Interview
Experience: The interviewer was friendly and patient. Interview went smoothly

College Name: MIT College Of Engineering

Interview Questionnaire 

1 Question

  • Q1. [07/04, 1:22 PM] kamalrAj: Un akka metar video venuma da [07/04, 1:29 PM] kamalrAj: Un akkava poyi kelu daaaa..... [07/04, 1:31 PM] kamalrAj: Un nilamai ninaicha vadivel mosama Irukumula

I applied via Referral and was interviewed before Feb 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Academic Project indetail & Questions from your Resume that skills you're mentioned.

I applied via Campus Placement and was interviewed before Sep 2019. There were 4 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Questions were asked from what I had put in the resume
  • Q2. About myself

Interview Preparation Tips

Interview preparation tips for other job seekers - Should not try to show that we know...If we know the answer we can answer or else admit we dont know..being honest is important and we should be sound enough technically and in vocabulary

I applied via Other and was interviewed in Aug 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Tell me something about your Hometown

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be confident, rest will be okay
Contribute & help others!
anonymous
You can choose to be anonymous

Assystem Interview FAQs

How many rounds are there in Assystem Trainee Design Engineer interview?
Assystem interview process usually has 2 rounds. The most common rounds in the Assystem interview process are Resume Shortlist and Technical.
What are the top questions asked in Assystem Trainee Design Engineer interview?

Some of the top questions asked at the Assystem Trainee Design Engineer interview -

  1. What is the purpose of cooling tower in power pl...read more
  2. What is the purpose of Chimney in the Power Pl...read more
  3. Different types of cooling towers used in power pla...read more

Recently Viewed

INTERVIEWS

Reliable Spaces

No Interviews

INTERVIEWS

QualiZeal

No Interviews

INTERVIEWS

Gabriel India

No Interviews

INTERVIEWS

Gabriel India

No Interviews

INTERVIEWS

Assystem

No Interviews

INTERVIEWS

Assystem

No Interviews

INTERVIEWS

Assystem

No Interviews

INTERVIEWS

Gabriel India

No Interviews

INTERVIEWS

Assystem

No Interviews

INTERVIEWS

QualiZeal

No Interviews

Tell us how to improve this page.

Assystem Trainee Design Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.5k Interviews
Accenture Interview Questions
3.8
 • 8.2k Interviews
Infosys Interview Questions
3.6
 • 7.6k Interviews
Wipro Interview Questions
3.7
 • 5.7k Interviews
Cognizant Interview Questions
3.8
 • 5.6k Interviews
Capgemini Interview Questions
3.7
 • 4.8k Interviews
Tech Mahindra Interview Questions
3.5
 • 3.9k Interviews
HCLTech Interview Questions
3.5
 • 3.8k Interviews
IBM Interview Questions
4.0
 • 2.4k Interviews
Oracle Interview Questions
3.7
 • 905 Interviews
View all
Assystem Trainee Design Engineer Salary
based on 4 salaries
₹3 L/yr - ₹3.8 L/yr
51% more than the average Trainee Design Engineer Salary in India
View more details

Assystem Trainee Design Engineer Reviews and Ratings

based on 5 reviews

2.1/5

Rating in categories

2.0

Skill development

1.9

Work-life balance

1.9

Salary

1.9

Job security

1.7

Company culture

2.6

Promotions

1.9

Work satisfaction

Explore 5 Reviews and Ratings
Design Engineer
82 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Design Engineer
52 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Structural Design Engineer
50 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Consultant Engineer
47 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Manager
30 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Assystem with

TCS

3.7
Compare

Infosys

3.6
Compare

Wipro

3.7
Compare

HCLTech

3.5
Compare
Did you find this page helpful?
Yes No
write
Share an Interview