Upload Button Icon Add office photos

Filter interviews by

Assystem Site Engineer Interview Questions and Answers

Updated 1 Nov 2022

Assystem Site Engineer Interview Experiences

2 interviews found

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Nothing much , rest is basically technical

Round 3 - Group Discussion 

We have to talk on a subject for log time thats all

Round 4 - One-on-one 

(2 Questions)

  • Q1. How to speed control on motor and generator.
  • Ans. 

    Speed control on motors and generators can be achieved through various methods.

    • For motors, speed control can be achieved by adjusting the voltage, frequency, or the number of poles.

    • For generators, speed control can be achieved by adjusting the mechanical input or the load connected to the generator.

    • In motors, variable frequency drives (VFDs) can be used to control the speed by adjusting the frequency of the power suppl...

  • Answered by AI
  • Q2. What is IDFT controller ?
  • Ans. 

    IDFT controller stands for Inverse Discrete Fourier Transform controller.

    • IDFT controller is used in signal processing to convert frequency domain signals to time domain signals.

    • It is the inverse of the Discrete Fourier Transform (DFT) controller.

    • IDFT controller is commonly used in audio and video processing applications.

    • It is also used in communication systems to convert frequency domain signals to time domain signals ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Have a great confidence and idea . answer only those you know dont blabber

Site Engineer Interview Questions & Answers

user image Anonymous

posted on 14 Sep 2022

Round 1 - Technical 

(1 Question)

  • Q1. Codes, materials, concrete

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well before going for interview
Specifically technical questions

Site Engineer Interview Questions Asked at Other Companies

Q1. 1.BBS calculation of slab? 2.Stairs case riser and tread dimensio ... read more
Q2. What a term of Rolling margin on a steel?
Q3. Which type of pipe Line and it's standards following
Q4. design? 1.what is ASD in steel design? 2.what is special consider ... read more
Q5. What is the lapping zone of beam rebar at top and bottom...? Why ... read more

Interview questions from similar companies

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Basic all based on experience & there requirements
  • Q2. Experience & basic technical work like- transformer testing & PM checklist etc

Interview Preparation Tips

Interview preparation tips for other job seekers - brush up your basics, if having experience make sure you can justify that.

I applied via Company Website and was interviewed in Jan 2022. There were 5 interview rounds.

Round 1 - Technical 

(10 Questions)

  • Q1. As for drawing work and excavation work
  • Q2. Excavation proper level and drawing work
  • Q3. Level and coordinate proper work
  • Q4. Drawing for BBS and shuttering work
  • Q5. Management rebar and shuttering
  • Q6. As for drawing work and drawing proper seen
  • Q7. Work in experience 3 years
  • Q8. DPR and work timely and work Target
  • Q9. Dailly duty and emergency work holidays
  • Q10. Concrete work level and finishing work fine
  • Ans. 

    My concrete work level is excellent and I have experience in various finishing techniques.

    • I have experience in pouring and leveling concrete for foundations, walls, and slabs.

    • I am skilled in using various finishing techniques such as troweling, stamping, and staining.

    • I pay close attention to detail to ensure a smooth and even finish.

    • I am knowledgeable in the proper curing and sealing of concrete to ensure its longevity...

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. Rebar and shuttering work
Round 3 - Technical 

(1 Question)

  • Q1. BBS for drwaing work
  • Ans. 

    BBS stands for Bar Bending Schedule, which is a detailed list of reinforcement bars in a structure.

    • BBS is used in drawing work to ensure the correct amount of reinforcement is used in a structure.

    • It includes details such as bar diameter, length, shape, and placement.

    • BBS helps in estimating the amount of steel required for a project and also helps in cost estimation.

    • It is an important part of the construction process an...

  • Answered by AI
Round 4 - Technical 

(1 Question)

  • Q1. Rebar and shuttering work
Round 5 - Technical 

(2 Questions)

  • Q1. Drawing for level and Finnish
  • Q2. Coordinate proper and management

Interview Preparation Tips

Interview preparation tips for other job seekers - Civil engineer work Reinforcement and shuttering and concrete work
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Jul 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Regarding the technical knowledge about RCC structures.
  • Q2. Regarding technicalities during finishing items of the industry.
Round 3 - One-on-one 

(1 Question)

  • Q1. Regarding stay location, to allot working site

Interview Preparation Tips

Interview preparation tips for other job seekers - You need to study technical aspects to the fullest.

I applied via Naukri.com and was interviewed in Nov 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is impedance ,reacance
  • Ans. 

    Impedance is the total opposition to the flow of alternating current in a circuit, while reactance is the opposition to the flow of alternating current caused by capacitance or inductance.

    • Impedance is a combination of resistance and reactance in a circuit.

    • Reactance is the opposition to the flow of alternating current caused by capacitance or inductance.

    • Capacitive reactance is the opposition to the flow of alternating c...

  • Answered by AI
  • Q2. How calculate plant load factors
  • Ans. 

    Plant load factor is calculated by dividing the actual energy generated by the maximum possible energy that could have been generated.

    • Plant load factor = Actual energy generated / Maximum possible energy that could have been generated

    • Maximum possible energy is calculated by multiplying the rated capacity of the plant with the number of hours in a given time period

    • Plant load factor is expressed as a percentage

    • It is used...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Focus on fundamental, And answer with clear mindset
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

About General knowledge Electrical related

Round 2 - Group Discussion 

Projects, HT< line

Round 3 - Technical 

(1 Question)

  • Q1. EHV line & substations & 100MVA transforms, breakers&CT&PT's and Wind power plant related
Round 4 - One-on-one 

(1 Question)

  • Q1. Electrical Techincal wind power plant EHV&HT&BOP related

Interview Preparation Tips

Interview preparation tips for other job seekers - Dear sir/madam,
I have searching for vacancys
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Why we would choose you
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via campus placement at LD College of Engineering, Ahmedabad and was interviewed before Apr 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Quantitative and Electrical Engineering Questions

Round 2 - Technical 

(5 Questions)

  • Q1. Power Distribution Questions
  • Q2. Describe entire power system
  • Ans. 

    The power system is a network of electrical components used to generate, transmit, and distribute electricity.

    • Includes power generation, transmission, distribution, and utilization

    • Consists of power plants, transformers, substations, transmission lines, and distribution lines

    • Involves AC and DC power systems

    • Utilizes various protection and control systems to ensure reliability and safety

    • Examples: hydroelectric power syste...

  • Answered by AI
  • Q3. What to do for electrocution?
  • Q4. How to identify transformer type
  • Ans. 

    Transformer type can be identified by checking the winding configuration, core type, and cooling method.

    • Check the winding configuration - transformers can be either step-up, step-down, or isolation transformers.

    • Identify the core type - transformers can have either core-type or shell-type construction.

    • Determine the cooling method - transformers can be air-cooled, oil-cooled, or water-cooled.

    • Check for any markings or lab

  • Answered by AI
  • Q5. What are types of cables
  • Ans. 

    Types of cables include coaxial, twisted pair, fiber optic, and ribbon cables.

    • Coaxial cable: used for cable television and internet connections

    • Twisted pair cable: commonly used for Ethernet networks

    • Fiber optic cable: transmits data using light signals

    • Ribbon cable: used for internal computer connections

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Go prepared on technical details.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Dec 2022. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Regarding basic ideas of core field. Like- what are the consequences of electric current failures?
  • Q2. Discuss about two types of valves from any field.
  • Ans. 

    Two types of valves commonly used are ball valves and gate valves.

    • Ball valves have a spherical closure unit that allows for quick on/off control of flow.

    • Gate valves have a flat closure unit that is raised and lowered to control flow.

    • Ball valves are commonly used in plumbing systems, while gate valves are often used in industrial applications.

    • Both types of valves can be manual or automated for remote operation.

    • Examples ...

  • Answered by AI
Round 2 - One-on-one 

(2 Questions)

  • Q1. Relates to personal questions like the motive to join Siemens?
  • Q2. What makes you to resign at the latest or earlier organization's

Interview Preparation Tips

Interview preparation tips for other job seekers - Try to keep your honesty in every field of work inside Siemens.

Assystem Interview FAQs

How many rounds are there in Assystem Site Engineer interview?
Assystem interview process usually has 2-3 rounds. The most common rounds in the Assystem interview process are One-on-one Round, Technical and Resume Shortlist.
How to prepare for Assystem Site Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Assystem. The most common topics and skills that interviewers at Assystem expect are Advertising, Consulting, Legal, Management and Revenue Generation.
What are the top questions asked in Assystem Site Engineer interview?

Some of the top questions asked at the Assystem Site Engineer interview -

  1. How to speed control on motor and generat...read more
  2. what is IDFT controlle...read more
  3. Codes, materials, concr...read more

Tell us how to improve this page.

Assystem Site Engineer Salary
based on 24 salaries
₹1.8 L/yr - ₹5.5 L/yr
13% less than the average Site Engineer Salary in India
View more details

Assystem Site Engineer Reviews and Ratings

based on 2 reviews

4.1/5

Rating in categories

4.0

Skill development

4.1

Work-life balance

4.1

Salary

4.1

Job security

4.1

Company culture

4.1

Promotions

4.1

Work satisfaction

Explore 2 Reviews and Ratings
Design Engineer
82 salaries
unlock blur

₹3.6 L/yr - ₹11.2 L/yr

Assistant Design Engineer
52 salaries
unlock blur

₹3 L/yr - ₹6 L/yr

Structural Design Engineer
50 salaries
unlock blur

₹3.3 L/yr - ₹12.5 L/yr

Consultant Engineer
47 salaries
unlock blur

₹4.4 L/yr - ₹10 L/yr

Senior Manager
29 salaries
unlock blur

₹12.5 L/yr - ₹30 L/yr

Explore more salaries
Compare Assystem with

TCS

3.7
Compare

Infosys

3.6
Compare

Wipro

3.7
Compare

HCLTech

3.5
Compare
Did you find this page helpful?
Yes No
write
Share an Interview