Filter interviews by
I have worked on various digital projects including designing and implementing digital circuits, developing microcontroller-based systems, and creating digital signal processing algorithms.
Designed and implemented digital circuits using Verilog and VHDL
Developed microcontroller-based systems using Arduino and Raspberry Pi
Created digital signal processing algorithms using MATLAB and Python
Worked on FPGA-based projects s...
Step responses for RC circuits with increasing complexity can be plotted.
Step response of a simple RC circuit with one resistor and one capacitor can be plotted.
Adding more resistors and capacitors in series or parallel can increase the complexity of the circuit.
Different values of resistors and capacitors can also affect the step response.
Simulation software like LTSpice can be used to plot step responses.
Step respons...
To determine the sign on the opamp and output impedances of transistor circuits without pen and paper.
Use mental math to determine the sign on the opamp based on the input and feedback signals
Estimate the output impedance by considering the transistor's characteristics and circuit topology
Practice mental math and circuit analysis to improve speed and accuracy
Use simulation software to verify calculations and gain addit
The minimum sampling frequency required for a passband signal from 5kHz to 10 kHz is 20 kHz.
The Nyquist-Shannon sampling theorem states that the minimum sampling frequency should be twice the highest frequency component of the signal.
In this case, the highest frequency component is 10 kHz, so the minimum sampling frequency required is 20 kHz.
Sampling at a lower frequency can result in aliasing, where higher frequency c...
State diagrams are visual representations of the states and transitions of a system.
Identify the states of the system
Determine the events that trigger state transitions
Draw the state diagram using appropriate symbols and notation
Label the states and transitions
Include any necessary conditions or actions for each transition
DDP stands for Design Data Package, which is a collection of documents and files that define a product's design.
DDP includes design specifications, drawings, schematics, and other relevant documents.
It is used to communicate the design intent to manufacturers and suppliers.
DDP ensures that the product is manufactured according to the design specifications.
It also helps in maintaining the product's quality and consisten...
Draw log(Id) vs Vgs for a MOSFET and explain the curve. Questions on subthreshold slope, howVth varies with length, asked to explain what is DIBL
The curve shows the relationship between drain current and gate-source voltage
Subthreshold slope is the rate of change of drain current with respect to gate voltage
Vth varies with length due to the effect of channel length modulation
DIBL stands for Drain Induced Barrier Loweri...
The design flow involves several stages from logic design to post silicon validation.
Logic design using hardware description languages (HDL)
Functional verification using simulation and emulation
Synthesis and optimization of design for target technology
Physical design including floor planning, placement, and routing
Design for testability (DFT) insertion
Manufacturing and fabrication of the design
Post silicon validation a
I applied via Company Website and was interviewed in Dec 2024. There were 4 interview rounds.
I applied via Referral and was interviewed in Nov 2024. There were 2 interview rounds.
50 mcq 40 minutes fast paced
Recursion is a technique where a function calls itself to solve a problem.
Identify the base case - the condition under which the function stops calling itself.
Define the recursive case - the condition under which the function calls itself.
Ensure progress towards the base case with each recursive call.
Example: Factorial calculation using recursion.
I applied via Company Website and was interviewed in Jul 2024. There were 2 interview rounds.
The exam was relatively easy; it only required a review of basic electronics, and it was conducted online.
A MOSFET graph typically shows the relationship between the input voltage and the output current.
The x-axis represents the input voltage (Vgs) while the y-axis represents the output current (Id).
The graph typically shows three regions: cutoff, triode, and saturation.
In the cutoff region, the MOSFET is off and there is no current flow.
In the triode region, the MOSFET is partially on and the output current increases line...
Analog Devices interview questions for popular designations
I have 5 years of experience in developing embedded software for automotive systems.
Developed software for automotive ECUs using C and assembly language
Worked on CAN and LIN communication protocols
Experience with AUTOSAR architecture
Debugging and testing embedded software using tools like Lauterbach Trace32
Collaborated with hardware engineers to optimize system performance
Get interview-ready with Top Analog Devices Interview Questions
Linked list, algorithms
I applied via Company Website and was interviewed in Jan 2024. There were 3 interview rounds.
You have to cut a cake maximum 3 times which should make 8 equal halves
An XOR gate can be designed using a 2:1 MUX by connecting the inputs to the select lines and the outputs to the data inputs.
Connect one input of the XOR gate to the select line of the MUX
Connect the other input of the XOR gate to the inverted select line of the MUX
Connect the outputs of the MUX to the XOR gate's output
An AND gate can be designed using a 2:1 multiplexer by connecting one input to select line and the other input to the data input.
Connect one input of the AND gate to the select line of the 2:1 mux
Connect the other input of the AND gate to the data input of the 2:1 mux
The output of the 2:1 mux will be the output of the AND gate
I have a strong background in design and verification engineering with a proven track record of successful projects.
I have a solid understanding of design and verification methodologies
I have experience working on complex projects and delivering high-quality results
I am a quick learner and can adapt to new technologies and tools easily
My strong background in design and verification, along with my problem-solving skills and attention to detail, make me a great fit for this role.
Extensive experience in design and verification methodologies
Proven track record of successfully completing complex projects
Strong problem-solving skills and attention to detail
Ability to work well in a team environment
Familiarity with industry-standard tools and technologies
I applied via Referral and was interviewed in Mar 2024. There were 2 interview rounds.
They asked about whallenges i faced inpast
DFt task abd past experience
Basic aptitude questions were asked
I applied via Campus Placement and was interviewed in Sep 2023. There were 3 interview rounds.
Topics on engineering Department
I applied via Campus Placement and was interviewed in Apr 2023. There were 3 interview rounds.
It was related to trees and queues
Top trending discussions
Some of the top questions asked at the Analog Devices interview -
The duration of Analog Devices interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 15 interviews
Interview experience
based on 90 reviews
Rating in categories
Hyderabad / Secunderabad,
Bangalore / Bengaluru
10-15 Yrs
Not Disclosed
Senior Engineer
23
salaries
| ₹0 L/yr - ₹0 L/yr |
Software Engineer
21
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Software Engineer
20
salaries
| ₹0 L/yr - ₹0 L/yr |
Design Engineer
14
salaries
| ₹0 L/yr - ₹0 L/yr |
Design & Verification Engineer
13
salaries
| ₹0 L/yr - ₹0 L/yr |
Texas Instruments
STMicroelectronics
NXP Semiconductors
Microchip Technology