Upload Button Icon Add office photos

Filter interviews by

XCMG India Manufacturing Design Engineer Interview Questions and Answers

Updated 24 Aug 2023

XCMG India Manufacturing Design Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Jul 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Introduce Yourself Questions Based on projects mentioned in resume Have you done benchmarking
  • Q2. Prepare your resume well.

Interview Preparation Tips

Interview preparation tips for other job seekers - Always prepare your resume well when applying as an Experience candidate

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Interview on basis things on mechanical and electrical and hydraulic things
Round 3 - Interview with NSH and team 

(1 Question)

  • Q1. Asking the troubleshooting of previous attended complaints
Round 4 - HR 

(1 Question)

  • Q1. Asking current company CTc and sent breakup salary
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. How to change the connector in inline wiring harness.
  • Ans. 

    To change the connector in an inline wiring harness, follow these steps:

    • Identify the type of connector needed for the replacement

    • Disconnect the existing connector from the wiring harness

    • Cut off the old connector, leaving enough wire length for the new connector

    • Strip the insulation from the wire ends

    • Crimp or solder the wires to the new connector

    • Secure the new connector to the wiring harness

    • Test the connection for proper

  • Answered by AI
  • Q2. How to Draw the connection line.
  • Ans. 

    To draw a connection line, start by identifying the two points you want to connect. Then, use a ruler or straight edge to draw a straight line between the two points.

    • Identify the two points you want to connect

    • Use a ruler or straight edge to draw a straight line between the two points

    • Ensure the line is clear and well-defined

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Go with free mind, be confident, presentable, and realistic you will definitely clear the interview.

I applied via Walk-in and was interviewed in Oct 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Same maintenance question laser machine, welding machine, utility and maintenance work

Interview Preparation Tips

Interview preparation tips for other job seekers - Go and do the interview nice job

I applied via Approached by Company and was interviewed in Jan 2022. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Every model hydra and new generation crane up to 23 ton

Interview Preparation Tips

Interview preparation tips for other job seekers - I m always ready for my team help and heavy job
Interview experience
2
Poor
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Not Selected

I was interviewed before Aug 2022.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. 1.Explain the project you have completed in your previous organisation 2.how do you select materials for the structure design. 3.what kind of load acts on lift arm 4. Reason to leave current organization.
Round 3 - Assignment 

Questions related Basic mechanical engineering subject
Strength of materials, machine design, thermal, hydraulic and pneumatic

I applied via Campus Placement

Interview Questionnaire 

7 Questions

  • Q1. Tell me about yourself ??
  • Ans. 

    I am a design engineer with experience in creating innovative solutions for complex problems.

    • I have a degree in mechanical engineering

    • I have worked on projects ranging from consumer products to industrial machinery

    • I am skilled in CAD software such as SolidWorks and AutoCAD

    • I have experience in prototyping and testing designs

    • I am a creative problem solver and enjoy collaborating with others to find solutions

  • Answered by AI
  • Q2. Would you go for higher studies??
  • Ans. 

    Yes, I am open to pursuing higher studies.

    • I believe in continuous learning and upgrading my skills.

    • Higher studies will provide me with a deeper understanding of my field.

    • It will also open up new opportunities for career growth.

    • For example, I may consider pursuing a master's degree in mechanical engineering.

    • I am willing to balance work and studies to achieve my goals.

  • Answered by AI
  • Q3. Why aren't you doing MBA??
  • Ans. 

    I believe that pursuing an MBA is not necessary for my career goals and personal growth.

    • I have already gained sufficient knowledge and skills through my education and work experience.

    • I prefer to focus on developing my technical expertise in design engineering.

    • I am open to pursuing other forms of education or training that align with my interests and goals.

    • An MBA may not necessarily guarantee career success or advanceme...

  • Answered by AI
  • Q4. What "are" your favourite subjects??
  • Ans. 

    My favourite subjects are mathematics, physics, and computer science.

    • Mathematics: I enjoy solving complex problems and finding patterns.

    • Physics: I am fascinated by the laws of nature and how they govern the universe.

    • Computer Science: I love programming and creating new software solutions.

  • Answered by AI
  • Q5. Basic questions from all subjects??
  • Q6. Questions from internship areas??
  • Q7. Questions from engineering drawing??

Interview Preparation Tips

Round: Resume and marks basis
Experience: Your resume should be such, that it should reflect all your qualities.
Tips: You should be very good in academics ,like in top 10 in your branch.

Round: Test
Experience: Questions are good and they especially focus on hydraulics as well as manufacturing processes as all machines are based on hydraulics.
Tips: Basics of hydraulics and manufacturing processes should be crystal clear.
Duration: 120 minutes
Total Questions: 80

Round: Group Discussion
Experience: You should try to start or conclude the GD.
Duration: 15 minutes

Round: HR Interview
Experience: HR people are nice , they check your communication skill as well as your point of view.
They basically take a psychometric test.
Tips: You should stick to your answers.

Round: Technical Interview
Experience: Its very rigorous process, of more than 45 minutes where they test everything, your knowledge, practical approach, mental strength and stress bearing capability.

General Tips: Be regular and attentive in your class , try to get good marks by gaining knowledge not just by completing the courses
Skills:
College Name: BIT Mesra
Motivation: 1. Very good salary
2. Market leader in India
3.

I applied via Campus Placement

Interview Preparation Tips

Round: Technical Interview
Experience: basic intro, focussed mainly on projexts you have done and softwares u know.. and basic core questions

General Tips: prepare well
Skills:
Duration: 2
College Name: IIT Madras
Motivation: seniors good reviews

Interview Questionnaire 

1 Question

  • Q1. How will you design a swimming diving board?
  • Ans. 

    To design a swimming diving board, I will consider the material, dimensions, weight capacity, and safety features.

    • Choose a durable and non-slip material like fiberglass or aluminum

    • Determine the appropriate length, width, and thickness based on the intended use and user demographics

    • Calculate the weight capacity and ensure it can support the maximum weight of a user

    • Incorporate safety features like a non-slip surface, rou...

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: I had a standard resume for this company as per our institute placement cell norms. I usually changed my “Areas of Interest” as per the company profile. For Caterpillar, I laid emphasis on all of my technical activities.

Round: Test
Experience: The written test was purely technical covering almost all the major topics of Mechanical Engineering course curriculum. The questions related to Fluid Mechanics were particularly difficult. The questions were all objective and the test was for a duration of 90 minutes.
Tips: For Caterpillar, one must have in-depth knowledge of almost all major topics of mechanical.
Duration: 90 minutes

Round: Technical Interview
Experience: The questions were totally technical. There were no HR questions even in the beginning. They asked me about my topic of interest and I replied as Solid Mechanics. They asked questions related to designing of stuff. For example one of the question that was asked from me was – How will you design a swimming diving board? It was a question on cantilever beam. The whole interview continued on this particular question. They kept on counter questioning and gave me additional situations as I proceeded and I had to incorporate them in my design process. They asked me to develop a static design and thereafter asked me to develop a dynamic design. Then they asked me for another subject of interest which I stated as vibration design. Then they asked me to do vibration analysis of the swimming board that I had designed earlier in the interview. They also asked me my favorite topic from class 10th and I replied as Mathematics. They asked me a simple question on it which I answered correctly.

College Name: IIT ROORKEE
Motivation: Most of the information regarding the company was obtained by attending the Pre-Placement Talk. The company is one of the pioneers in its field and hence it was sort of a dream company for students and we had researched about it by visiting its website and the Wikipedia Page.

I applied via Campus Placement

Interview Preparation Tips

Round: Resume Shortlist
Experience: Not very transparent and highly delayed.
Tips: Can indicate selection status immediately or within one day of announcement. One sentence describing reason for rejection or acceptance can be given.

Round: Test
Experience: N/A
Tips: N/A

General Tips: Please let us know in case of rejection or waiting list, we have to apply to other companies as well to secure an intern and a simple sentence on reason for rejection will be very helpful.
Skills: Python, Simulink, MATLAB
Duration: 1.5
College Name: IIT Madras
Motivation: Internationally reputed, Core mechanical company designing heavy machinery.

XCMG India Manufacturing Interview FAQs

How many rounds are there in XCMG India Manufacturing Design Engineer interview?
XCMG India Manufacturing interview process usually has 2 rounds. The most common rounds in the XCMG India Manufacturing interview process are Resume Shortlist and Technical.

Tell us how to improve this page.

XCMG India Manufacturing Design Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
Assistant Manager
10 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Diploma Trainee Engineer
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
6 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Associate Engineer
5 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare XCMG India Manufacturing with

Tata Hitachi Construction Machinery

4.0
Compare

Komatsu

3.9
Compare

L&T Construction

4.0
Compare

JCB

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview