Upload Button Icon Add office photos

Filter interviews by

XCMG India Manufacturing Engineer Trainee Interview Questions and Answers

Updated 22 Jul 2024

XCMG India Manufacturing Engineer Trainee Interview Experiences

1 interview found

Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
Not Selected

I applied via Campus Placement and was interviewed in Jan 2024. There was 1 interview round.

Round 1 - Aptitude Test 

General questions on basic engineering knowledge and Logical Reasoning

Interview questions from similar companies

I applied via Campus Placement and was interviewed before Aug 2020. There were 5 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Welding types
  • Q2. What is 7 QC tool
  • Ans. 

    7 QC tools are a set of basic quality control tools used to identify and solve quality problems.

    • The tools include: Pareto chart, cause-and-effect diagram, check sheet, histogram, scatter diagram, control chart, and flowchart.

    • They are used to analyze data, identify problems, and develop solutions.

    • For example, a Pareto chart can be used to identify the most common causes of defects, while a control chart can be used to m...

  • Answered by AI
  • Q3. What if difference bet QA & QC
  • Ans. 

    QA focuses on preventing defects while QC focuses on identifying and correcting defects.

    • QA involves the process of ensuring that the product meets the specified requirements and standards.

    • QC involves the process of identifying defects in the product and correcting them.

    • QA is a proactive approach while QC is a reactive approach.

    • QA is a preventive measure while QC is a corrective measure.

    • Example of QA: Reviewing requirem...

  • Answered by AI
  • Q4. What is diffect in welding
  • Ans. 

    Defects in welding refer to imperfections or flaws that occur during the welding process.

    • Common welding defects include porosity, undercutting, incomplete fusion, and cracks.

    • Porosity is caused by gas pockets trapped in the weld, while undercutting occurs when the base metal is melted away.

    • Incomplete fusion happens when the weld metal doesn't fuse properly with the base metal, and cracks can occur due to excessive heat ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Study in welding related mostly and then quality related material for fabrication unit

I applied via Job Portal and was interviewed in Oct 2020. There was 1 interview round.

Interview Preparation Tips

Interview preparation tips for other job seekers - This interview was a technical one but was majorly a stress test. It lasted for about 1 hour 10 minutes. The interviewer wanted to test both my knowledge and communication skills. Most of the questions asked to me were related to my B.Tech curriculum i.e. Civil Engineer site experience related topics. He stressed a lot on the basics related to my project topic. Luckily I was able to answer most of the questions correctly. I tried to answer each question with examples and also used props on the table (like pens, paperweights, pen stands etc.) to explain my theories. It was my first offcampus interview, and I think I did pretty well for a fresher. You need to stay calm and should apply presence of mind. Please go through the job description thoroughly word-by-word and recheck your resume to ensure that you are a best-fit for the position.

I applied via Company Website and was interviewed in Mar 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. All question based on past work experiences.

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare all the past experience challenge and step by step your envolvement.

Interview Questionnaire 

3 Questions

  • Q1. How many time u take any update shuttering system?
  • Ans. 

    The question is unclear and lacks context.

    • Please provide more information about the 'update shuttering system'.

    • Specify the time frame for the updates.

    • Clarify the purpose or objective of the updates.

    • Provide any relevant examples or scenarios.

  • Answered by AI
  • Q2. Why u want to work as a execution engineer? Why not any special team such as formwork team,or quality team?
  • Ans. 

    I want to work as an execution engineer because I enjoy the challenge of overseeing and coordinating all aspects of a project.

    • As an execution engineer, I would have the opportunity to work on a variety of projects and oversee all aspects of their execution.

    • I enjoy the challenge of coordinating different teams and ensuring that everything runs smoothly.

    • While working on a formwork or quality team would be valuable experi...

  • Answered by AI
  • Q3. As contractor farm Engineer in RCC which is most important? 1) Reinforcements 2)Formwork 3)Concrete And why?
  • Ans. 

    Concrete is the most important as it provides the strength and durability to the structure.

    • Concrete is the backbone of any RCC structure.

    • It provides the strength and durability to the structure.

    • Reinforcements and formwork are important too, but without concrete, they are useless.

    • Proper mix design and curing of concrete are crucial for the longevity of the structure.

  • Answered by AI

I applied via Company Website and was interviewed before Apr 2020. There were 4 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Load distribution under rigid and flexible footings,water tank design, steel foundation design
  • Q2. Mix design of concrete, btech project
  • Ans. 

    Mix design of concrete and BTech project

    • Mix design involves determining the proportions of cement, water, aggregates, and admixtures to achieve desired properties of concrete

    • Factors like strength, workability, durability, and cost are considered while designing the mix

    • BTech project can involve studying the effect of different mix designs on properties of concrete or developing a new mix design

    • Examples of BTech projects...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - be well prepared with basics and if you are already experienced, be prepared with site knowledge

I applied via Walk-in and was interviewed in Dec 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. About my work experience & my self
  • Q2. Tell me about your self.

Interview Preparation Tips

Interview preparation tips for other job seekers - Always candidates have good knowledge of relevant work.and be confident about it,interviewrs always seeing your confidence level and skills.

Interview Questionnaire 

1 Question

  • Q1. Technical question

I applied via Campus Placement and was interviewed before Aug 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. I was applied from my college , written was easy , second round was like Technical and HR
  • Q2. Did you visited any Industrial site , question's on that , What is smart grid (I was from Electrical background) , and asked How movies influences is their in Telangana

Interview Preparation Tips

Interview preparation tips for other job seekers - prepare for both HR and Technical for 1st round and be aware of current affairs events on that month

I applied via Walk-in and was interviewed in Oct 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Same maintenance question laser machine, welding machine, utility and maintenance work

Interview Preparation Tips

Interview preparation tips for other job seekers - Go and do the interview nice job

XCMG India Manufacturing Interview FAQs

How many rounds are there in XCMG India Manufacturing Engineer Trainee interview?
XCMG India Manufacturing interview process usually has 1 rounds. The most common rounds in the XCMG India Manufacturing interview process are Aptitude Test.

Tell us how to improve this page.

XCMG India Manufacturing Engineer Trainee Interview Process

based on 1 interview

Interview experience

2
  
Poor
View more
Assistant Manager
10 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Diploma Trainee Engineer
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
6 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Associate Engineer
5 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare XCMG India Manufacturing with

Tata Hitachi Construction Machinery

4.0
Compare

Komatsu

3.9
Compare

L&T Construction

4.0
Compare

JCB

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview