Upload Button Icon Add office photos

Worley

Compare button icon Compare button icon Compare

Filter interviews by

Worley Piping Engineer 2 Interview Questions and Answers

Updated 12 Jan 2023

Worley Piping Engineer 2 Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Jan 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. What are the areas you have handled?
  • Q2. What are equipments you ahve handled?
  • Ans. 

    I have handled various equipments including pumps, compressors, heat exchangers, and valves.

    • Handled pumps of different types such as centrifugal, reciprocating, and positive displacement pumps

    • Managed compressors like reciprocating, screw, and centrifugal compressors

    • Worked with heat exchangers including shell and tube, plate and frame, and air-cooled exchangers

    • Operated different types of valves such as gate, globe, ball

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well for technical and prepare past experience summary.

Interview questions from similar companies

Interview Questionnaire 

2 Questions

  • Q1. They asked me mostly about my thesis. And why am i interested in Geotechnical Engg
  • Q2. Starting from modulus of elasticity of soil to liquifaction of soil. It went on like a discussion process
  • Ans. 

    Discussion on soil mechanics starting from modulus of elasticity to liquifaction

    • Modulus of elasticity is a measure of soil stiffness

    • Soil strength is important in determining its ability to withstand loads

    • Liquifaction occurs when soil loses strength and behaves like a liquid

    • Factors affecting soil strength include soil type, moisture content, and stress history

    • Liquifaction can lead to soil failure and damage to structure

  • Answered by AI

Interview Preparation Tips

Round: Interview
Experience: This round went pretty much well and i answered them fairly and easily.

Round: Interview
Experience: This was the round where i felt bit nervous but as i was known well my my subjects i answered them all perfectly.
Tips: Brush up your skills regularly.

General Tips: Have a good sense of your clothing,have confidence on what you speak.
Skills: Technical skills , General Knowledge
College Name: IIT ROORKEE
Motivation: i am a self motivator

I applied via Recruitment Consulltant and was interviewed before Nov 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Will ask about layout details pumps, drums, tower, utility process lines
  • Q2. Tell about yourself, your strength & weaknes
  • Ans. 

    I am a Piping Engineer with strong technical skills and attention to detail. My strengths include problem-solving, teamwork, and communication.

    • I have a Bachelor's degree in Mechanical Engineering with a specialization in Piping Design.

    • I have experience working on various projects, including designing and analyzing piping systems for industrial plants.

    • I am proficient in using software such as AutoCAD and CAESAR II for p...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident, whatever in resume that will ask. Go with well prepared.

I applied via Recruitment Consulltant and was interviewed before Apr 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Very basic question - will ask you to study a drawing and find mistakes regarding GD&T. Very basic question about general engineering knowledge. Mostly prepare your past project handled, critical units and...
  • Q2. What is present GD&T ASME standard?
  • Ans. 

    The present GD&T ASME standard is ASME Y14.5-2018.

    • ASME Y14.5-2018 is the current version of the GD&T standard published by the American Society of Mechanical Engineers (ASME).

    • GD&T stands for Geometric Dimensioning and Tolerancing, which is a system used to define and communicate engineering tolerances.

    • The ASME Y14.5-2018 standard provides guidelines and rules for the interpretation and application of GD&T symbols, term...

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Salary discussion - if relocating from another city, please ask for relocation bonus. The HR won't tell you about it but it is applicable. You just have to ask.

Interview Preparation Tips

Interview preparation tips for other job seekers - 1. Company is good for global exposure. Policies are very good.
2. Very good work-life balance - ample leaves.
3. be vary of old employees - found to be very possessive of their role, won't let you climb up the positions easily. You can call it Indian MNC. Someone from Norway should head the office here in Pune.

I applied via Recruitment Consultant and was interviewed before May 2018. There were 5 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. About My job profile that i have mentioned in my resume about my previous job roles and responsibilities
  • Q2. Technical skills, some technical engineering questions
  • Q3. Questions about the current profile i was interviewing for
  • Q4. Some SWOT analysis
  • Q5. What i am better than others
  • Ans. 

    I have a unique combination of technical skills and creativity that allows me to approach problems in a unique way.

    • I have a strong background in both engineering and design, which allows me to bridge the gap between the two fields.

    • I am able to think outside the box and come up with innovative solutions to complex problems.

    • I have a keen eye for detail and am able to create designs that are both functional and aesthetica...

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Technical written test

General Tips: Be confident, make your resume heavy, always be ware of ehat you have given in your resume, revise about the comoany your interviewed
Skills: Design and engineering knowledge, Communication, Problem Solving, Presentation Skills
Duration: 1-4 weeks
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Jan 2023. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Explain this GD&T symbol.
  • Ans. 

    This GD&T symbol is called concentricity.

    • Concentricity is a geometric tolerance that controls the central axis of a cylindrical feature relative to a datum axis.

    • It ensures that the cylindrical feature has a consistent center point within a specified tolerance zone.

    • The symbol for concentricity is a circle with two parallel lines inside.

    • It is often used to control the alignment of rotating parts, such as shafts and beari...

  • Answered by AI
  • Q2. What welding process would you use here?
  • Ans. 

    The appropriate welding process would depend on the materials being joined and the desired strength and appearance of the weld.

    • Consider the materials being joined - different processes are suitable for different materials (e.g. MIG for steel, TIG for aluminum)

    • Consider the desired strength of the weld - some processes offer stronger welds than others (e.g. TIG welding produces high-quality, strong welds)

    • Consider the app...

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. How can you useful for this organisation?
  • Q2. Tell me your strengths and weaknesses.

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare GD&T.

I applied via Referral and was interviewed in Sep 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. Based on points mentioned in resume, asked to draw PFD or block diagram for processes on which you have worked and questions on that
  • Q2. Problem on pump hydraulics and control valve hydraulics
  • Q3. Questions on safety valves are expected, I have not did safety valves so those questions were skipped
  • Q4. Questions on compressors
  • Q5. Questions on relief systems

Interview Preparation Tips

Interview preparation tips for other job seekers - Interviewer may went into detail or basic for the system or processes you have worked or mentioned in resume so prepare well
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Basic Mechanical Engineering, welding, GD n T etc

Round 3 - Technical 

(2 Questions)

  • Q1. 1. Current job details 2. Engineering fundamentals 3. GD n T 4. Welding knowledge 5. Problem Solving skills
  • Q2. 1. What are different kinds of weld and its applications. 2. What is stress, strain, torque, buoyancy etc
  • Ans. 

    1. Different types of welds and their applications. 2. Stress, strain, torque, buoyancy, etc.

    • Different types of welds include butt welds, fillet welds, lap welds, etc.

    • Butt welds are used to join two pieces of metal together end-to-end, while fillet welds are used to join two pieces of metal together at right angles.

    • Lap welds are used to join two pieces of metal together that overlap each other.

    • Stress is the force per u...

  • Answered by AI
Round 4 - Assignment 

Solidworks Model test

Interview Preparation Tips

Interview preparation tips for other job seekers - Core Engineering skills
Focus on current job knowledge
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. Saudi aramco engineering standards.
  • Ans. 

    Saudi Aramco Engineering Standards are guidelines and specifications used in engineering projects for Saudi Aramco.

    • Saudi Aramco Engineering Standards cover various aspects of engineering design, materials, construction, and operation.

    • These standards ensure consistency, quality, and safety in all engineering projects undertaken by Saudi Aramco.

    • Examples of areas covered by the standards include piping design, electrical ...

  • Answered by AI
  • Q2. Design related discussions
  • Q3. Safe practices in design
  • Ans. 

    Safe practices in design involve considering potential hazards, following regulations, and prioritizing safety.

    • Identify potential hazards in the design process

    • Follow industry regulations and standards for safety

    • Prioritize safety over cost or convenience

    • Regularly review and update safety protocols

    • Include safety features in the design, such as emergency shut-off valves

    • Consider environmental impact and sustainability in d

  • Answered by AI
  • Q4. Quality of deliverables
  • Ans. 

    Quality of deliverables is crucial for successful project completion.

    • Ensuring accuracy and completeness of drawings and documents

    • Adhering to project specifications and standards

    • Regularly reviewing and revising deliverables to meet client requirements

    • Seeking feedback from stakeholders to improve quality

    • Using software tools effectively to enhance deliverables

    • Maintaining clear communication with team members for consisten

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Familiarization with the clients standard and procedures

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Apr 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. What type of Pressure Tests are conducted on valves?
  • Ans. 

    Various pressure tests are conducted on valves including hydrostatic test, pneumatic test, and cryogenic test.

    • Hydrostatic test is conducted by filling the valve with water and pressurizing it to a specified pressure to check for leaks.

    • Pneumatic test involves using air or nitrogen to pressurize the valve and check for leaks or defects.

    • Cryogenic test is performed at low temperatures to ensure the valve can withstand extr...

  • Answered by AI
  • Q2. What are some of the most important safety considerations you make when designing piping systems?
  • Ans. 

    Safety considerations in designing piping systems are crucial for preventing accidents and ensuring the integrity of the system.

    • Ensuring proper material selection to withstand the intended pressure and temperature conditions

    • Implementing proper support and restraint systems to prevent excessive stress and vibration

    • Incorporating adequate access points for maintenance and inspection

    • Following relevant codes and standards s...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Make use of networking and both online and non-online job search opportunities

Worley Interview FAQs

How many rounds are there in Worley Piping Engineer 2 interview?
Worley interview process usually has 2 rounds. The most common rounds in the Worley interview process are Resume Shortlist and One-on-one Round.

Tell us how to improve this page.

Worley Piping Engineer 2 Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Tata Projects Interview Questions
4.2
 • 426 Interviews
KEC International Interview Questions
4.0
 • 299 Interviews
Tata Technologies Interview Questions
3.6
 • 258 Interviews
TCE Interview Questions
3.8
 • 248 Interviews
Saint-Gobain Interview Questions
4.0
 • 172 Interviews
View all
Worley Piping Engineer 2 Salary
based on 11 salaries
₹12.5 L/yr - ₹18 L/yr
13% more than the average Piping Engineer 2 Salary in India
View more details

Worley Piping Engineer 2 Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

5.0

Salary

5.0

Job security

5.0

Company culture

5.0

Promotions

5.0

Work satisfaction

Explore 1 Review and Rating
Process Engineer
325 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
203 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Piping Designer
159 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Piping Design Engineer
153 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Design Engineer
150 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Worley with

Jacobs Engineering Group

4.1
Compare

Fluor Corporation

4.3
Compare

Bechtel

4.0
Compare

McDermott International

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview