Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Welspun Corp Team. If you also belong to the team, you can get access from here

Welspun Corp Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Welspun Corp Assistant Officer Interview Questions and Answers

Updated 17 Jul 2021

Welspun Corp Assistant Officer Interview Experiences

1 interview found

Interview Questionnaire 

1 Question

  • Q1. What is your name

Interview Preparation Tips

Interview preparation tips for other job seekers - Job

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. When will I get a chance to work sir
  • Q2. I wish to work in jsw steel company
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Explain Iron carbon diagram?
  • Ans. 

    Iron carbon diagram is a graphical representation of the phases that exist in iron-carbon alloys at different temperatures and compositions.

    • Shows the phases of iron and carbon at different temperatures and compositions

    • Consists of regions for austenite, ferrite, cementite, and pearlite

    • Helps in understanding the microstructure and properties of steel

    • Used in heat treatment processes to control the final properties of stee

  • Answered by AI
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(5 Questions)

  • Q1. How to use impact idler
  • Ans. 

    Impact idlers are used in conveyor systems to absorb impact and reduce damage to the belt.

    • Impact idlers are typically installed at loading points on conveyor belts to absorb impact and reduce damage to the belt.

    • They are designed with rubber rings or discs that compress upon impact, cushioning the blow.

    • Properly installed impact idlers can help extend the life of the conveyor belt and reduce maintenance costs.

  • Answered by AI
  • Q2. What is the angele of convair
  • Ans. 

    The angle of convair refers to the angle at which the wings of an aircraft are positioned relative to the fuselage.

    • The angle of convair is crucial for determining the stability and performance of an aircraft.

    • It is typically measured in degrees and can vary depending on the design of the aircraft.

    • For example, a higher angle of convair can provide more lift at slower speeds, while a lower angle may improve fuel efficienc

  • Answered by AI
  • Q3. Wich of gear use in convair
  • Ans. 

    Various gears are used in Convair aircraft for different functions.

    • Convair aircraft use a variety of gears for different systems such as landing gear, engine gears, and control system gears.

    • Examples of gears used in Convair aircraft include spur gears, bevel gears, and helical gears.

    • Each gear serves a specific purpose in ensuring the proper functioning of the aircraft.

  • Answered by AI
  • Q4. What is zss inconvair
  • Ans. 

    ZSS Inconvair is a research aircraft used by NASA for studying atmospheric phenomena.

    • ZSS Inconvair is a modified Convair 990 aircraft used for scientific research purposes.

    • It is equipped with various instruments to study atmospheric chemistry, climate change, and other related phenomena.

    • NASA uses ZSS Inconvair for conducting research flights at high altitudes to collect data for scientific studies.

  • Answered by AI
  • Q5. What istransmission
  • Ans. 

    Transmission is the process of transferring power from the engine to the wheels of a vehicle.

    • Transmission helps control the speed and torque of a vehicle

    • There are different types of transmissions such as manual, automatic, and CVT

    • Transmission fluid is used to lubricate and cool the transmission system

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed before Oct 2021.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Line details experience
  • Q2. Process improvement

Interview Preparation Tips

Interview preparation tips for other job seekers - Best of luck . Hmmmmmmmmn
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jul 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Transformer protection settings
  • Q2. Motor protection settings
  • Ans. 

    Motor protection settings are parameters set to protect the motor from damage due to overcurrent, overload, overheating, etc.

    • Motor protection settings include overload relay, thermal overload relay, circuit breaker, fuses, etc.

    • These settings are crucial for preventing motor damage and ensuring safe operation.

    • Examples of motor protection settings include setting the overload relay to trip at a certain current level, set...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Very strict company
Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
No response

I applied via Naukri.com and was interviewed in May 2024. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Preffered Location
  • Q2. Salary expectation
Round 2 - Technical 

(3 Questions)

  • Q1. Sheet pile use in damp & flood area
  • Ans. 

    Sheet piles are commonly used in damp and flood-prone areas to provide structural support and prevent water infiltration.

    • Sheet piles are driven into the ground to create a barrier against water seepage.

    • They are often made of steel or vinyl and are interlocked to form a continuous wall.

    • Sheet piles can be used in cofferdams, seawalls, and flood protection systems.

    • They are effective in preventing soil erosion and protecti...

  • Answered by AI
  • Q2. Wind load calculation
  • Q3. Grade of concrete
  • Ans. 

    Grade of concrete refers to the strength of the concrete mix design.

    • Grade of concrete is denoted by the ratio of cement to sand to aggregate.

    • Common grades of concrete include M10, M15, M20, etc.

    • Higher grade concrete has higher strength and durability.

    • For example, M20 concrete has a compressive strength of 20 MPa.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Know about your previous work experience as per mention in cv
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in May 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. How to improve blast Furnace productivity.
  • Ans. 

    Improving blast furnace productivity involves optimizing operations, maintenance, and technology.

    • Implement regular maintenance schedules to prevent breakdowns and downtime.

    • Optimize raw material quality and charging practices for efficient operation.

    • Utilize advanced technology and automation to monitor and control the process.

    • Train and empower employees to identify and address productivity issues.

    • Analyze data and perfor...

  • Answered by AI
  • Q2. How to decrease the fuel rate of blast Furnace.
  • Ans. 

    To decrease the fuel rate of blast furnace, optimize the combustion process, improve insulation, and use alternative fuels.

    • Optimize the combustion process by adjusting air-to-fuel ratio and ensuring proper mixing of fuel and air.

    • Improve insulation of the furnace to reduce heat loss and increase efficiency.

    • Use alternative fuels such as natural gas or biomass to reduce the consumption of traditional fuels like coal or co

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
Selected Selected
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - One-on-one 

(3 Questions)

  • Q1. Related of my work experience after procurement department taken by PURCHASE HOD ALONG WITH HR.
  • Q2. It will be related to experience.
  • Q3. Yes it related to work experience

Interview Preparation Tips

Interview preparation tips for other job seekers - It was good
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - One-on-one 

(5 Questions)

  • Q1. 1. Tell me about yourself
  • Q2. 2. Why u choosed mechanical engineering
  • Q3. 3. Elaborate use of gear box
  • Ans. 

    A gear box is a mechanical device that uses gears to provide speed and torque conversions from a rotating power source to another device.

    • Gear boxes are commonly used in vehicles to transfer power from the engine to the wheels.

    • They can also be found in industrial machinery to control speed and direction of rotation.

    • Gear boxes consist of multiple gears of different sizes that mesh together to provide the desired output.

    • T...

  • Answered by AI
  • Q4. 4. Types of pumps and their characteristics
  • Ans. 

    Types of pumps include centrifugal, positive displacement, and axial flow pumps.

    • Centrifugal pumps use a rotating impeller to increase the pressure of a fluid.

    • Positive displacement pumps move fluid by trapping a fixed amount and forcing it through the discharge.

    • Axial flow pumps move fluid parallel to the impeller shaft.

    • Examples include centrifugal pumps in HVAC systems, diaphragm pumps in chemical processing, and axial

  • Answered by AI
  • Q5. Metallurgical process of blast furnace
  • Ans. 

    Blast furnace is a metallurgical process used to extract iron from its ore through reduction reactions.

    • Iron ore, coke, and limestone are fed into the furnace

    • Hot air is blown into the furnace to ignite the coke and initiate the reduction process

    • The iron ore is reduced to molten iron, which is tapped off at the bottom of the furnace

    • Slag, a byproduct of the process, is also tapped off and used in construction

    • The process i...

  • Answered by AI

Tell us how to improve this page.

Interview Questions from Similar Companies

Tata Steel Interview Questions
4.1
 • 836 Interviews
JSW Steel Interview Questions
3.9
 • 580 Interviews
Jindal Stainless Interview Questions
4.2
 • 202 Interviews
JSW Group Interview Questions
3.9
 • 109 Interviews
Jindal Saw Interview Questions
4.0
 • 98 Interviews
View all
Welspun Corp Assistant Officer Salary
based on 27 salaries
₹2 L/yr - ₹3.6 L/yr
33% less than the average Assistant Officer Salary in India
View more details

Welspun Corp Assistant Officer Reviews and Ratings

based on 8 reviews

4.2/5

Rating in categories

4.1

Skill development

3.6

Work-life balance

3.3

Salary

3.1

Job security

3.5

Company culture

3.4

Promotions

3.6

Work satisfaction

Explore 8 Reviews and Ratings
Associate Manager
155 salaries
unlock blur

₹4 L/yr - ₹9.5 L/yr

Engineer
78 salaries
unlock blur

₹1.8 L/yr - ₹6.5 L/yr

Assistant Manager
72 salaries
unlock blur

₹4.8 L/yr - ₹12.1 L/yr

Manager
58 salaries
unlock blur

₹6 L/yr - ₹17.5 L/yr

Assistant Engineer
49 salaries
unlock blur

₹1.6 L/yr - ₹5 L/yr

Explore more salaries
Compare Welspun Corp with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Steel Authority Of India

4.1
Compare

ArcelorMittal Nippon Steel

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview