Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Welspun Corp Team. If you also belong to the team, you can get access from here

Welspun Corp Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Welspun Corp Fitter Interview Questions and Answers

Updated 19 Apr 2024

Welspun Corp Fitter Interview Experiences

1 interview found

Fitter Interview Questions & Answers

user image Birat Ash

posted on 19 Apr 2024

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(1 Question)

  • Q1. What size of drill bit use to drill a 4 mm hole?
  • Ans. 

    To drill a 4 mm hole, use a 4 mm drill bit.

    • Use a drill bit that matches the size of the hole you want to create.

    • In this case, a 4 mm drill bit should be used to drill a 4 mm hole.

    • Using a smaller or larger drill bit will result in a hole size different from 4 mm.

  • Answered by AI

Interview questions from similar companies

I applied via Indeed and was interviewed in Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

Interview Preparation Tips

Topics to prepare for Jindal Steel and Power Fitter interview:
  • Fitter
  • Hydraulics
Interview preparation tips for other job seekers - Mechanical fitter assembly, maintenance, mechanical,etc .
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via AmbitionBox and was interviewed in Apr 2024. There were 2 interview rounds.

Round 1 - Case Study 

Case study safety case study safety

Round 2 - Technical 

(2 Questions)

  • Q1. I am beginner I am try to my best
  • Q2. I am beginner I try to my best

Interview Preparation Tips

Interview preparation tips for other job seekers - I am bingner I am try to my best

I applied via Job Portal and was interviewed before Nov 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Direct through campus placement and group discussion.

Round 3 - Technical 

(2 Questions)

  • Q1. All the studies related concepts were aksed
  • Q2. About COST ACCOUNTING STANDARDS

Interview Preparation Tips

Interview preparation tips for other job seekers - Clear all your attempts of CMA in one go and prepare all the concepts before interview
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Mar 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Plant overview and process
  • Q2. Rankine cycle process and efficiency
  • Ans. 

    Rankine cycle is a thermodynamic cycle used in power plants to generate electricity.

    • Rankine cycle is a closed-loop cycle that uses steam to generate power.

    • The cycle consists of four processes: heating, vaporization, expansion, and condensation.

    • The efficiency of the Rankine cycle can be improved by increasing the temperature and pressure of the steam.

    • The Rankine cycle is commonly used in power plants to generate electri...

  • Answered by AI

I applied via Naukri.com and was interviewed before Jan 2021. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Chemical analysis of chromite ore by ICP OES
  • Ans. 

    ICP OES is a technique used for chemical analysis of chromite ore.

    • ICP OES stands for Inductively Coupled Plasma Optical Emission Spectroscopy.

    • It is a powerful analytical technique used for the determination of trace elements in a variety of matrices.

    • ICP OES can be used to determine the concentration of elements such as Cr, Fe, Mg, Al, and Si in chromite ore.

    • The technique involves the excitation of atoms in a sample usi...

  • Answered by AI
  • Q2. Principle of ICP oes
  • Ans. 

    ICP-OES is a technique used for elemental analysis in which a sample is vaporized and excited by a plasma to emit light.

    • ICP-OES stands for Inductively Coupled Plasma Optical Emission Spectroscopy.

    • It is used to determine the concentration of elements in a sample.

    • The sample is vaporized and excited by a plasma to emit light, which is then analyzed to determine the elemental composition.

    • ICP-OES is commonly used in environ...

  • Answered by AI
  • Q3. Weight chemical analysis of chromite ore
  • Ans. 

    Weight chemical analysis of chromite ore involves determining the percentage of various elements present in the ore.

    • The ore is first crushed and ground into a fine powder.

    • The powder is then mixed with various chemicals to dissolve the elements of interest.

    • The resulting solution is then analyzed using various techniques such as atomic absorption spectroscopy or inductively coupled plasma mass spectrometry.

    • The percentage...

  • Answered by AI
  • Q4. Knowledge of NABL
  • Q5. Knowledge of ISO 17025,ISO 9001,ISO 450001, IMS

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and be calm whenever u will give your interview.
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Do not use an unprofessional email address such as cool_boy@email.com. It shows a lack of professionalism by the candidate.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Lubrication department in merchant mill
  • Ans. 

    The lubrication department in a merchant mill is responsible for ensuring proper lubrication of machinery to prevent wear and tear.

    • The lubrication department is crucial for maintaining the efficiency and longevity of machinery in the merchant mill.

    • They are responsible for regularly inspecting and lubricating equipment to prevent breakdowns.

    • Proper lubrication helps reduce friction, heat, and wear on moving parts.

    • Example...

  • Answered by AI
Round 3 - Coding Test 

Number or alfabet in English

Round 4 - Aptitude Test 

Aptitude test from physics

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Tools ke bari mai
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Jan 2025.

Round 1 - Technical 

(3 Questions)

  • Q1. I do good supervisory
  • Q2. And promotion for my work
  • Q3. No question and good
Round 2 - Technical 

(2 Questions)

  • Q1. I do good supervisory
  • Q2. And my promotion for my job

Interview Preparation Tips

Interview preparation tips for other job seekers - Erection, machine handal

I was interviewed in Dec 2016.

Interview Preparation Tips

Round: Test
Duration: 1 hour
Total Questions: 60

College Name: S.B. JAIN INSTITUDE OF TECHONOLOGY MANAGEMENT & RESEARCH, NAGPUR

Welspun Corp Interview FAQs

How many rounds are there in Welspun Corp Fitter interview?
Welspun Corp interview process usually has 1 rounds. The most common rounds in the Welspun Corp interview process are One-on-one Round.

Tell us how to improve this page.

Welspun Corp Fitter Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Tata Steel Interview Questions
4.1
 • 855 Interviews
JSW Steel Interview Questions
3.9
 • 590 Interviews
Jindal Stainless Interview Questions
4.2
 • 205 Interviews
JSW Group Interview Questions
3.9
 • 109 Interviews
Jindal Saw Interview Questions
4.0
 • 99 Interviews
View all
Welspun Corp Fitter Salary
based on 4 salaries
₹1.7 L/yr - ₹2.4 L/yr
14% less than the average Fitter Salary in India
View more details
Associate Manager
151 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
79 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
73 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
58 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer
49 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Welspun Corp with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Steel Authority Of India

4.1
Compare

ArcelorMittal Nippon Steel

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview