Tata Steel
Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards
Filter interviews by
I applied via Naukri.com and was interviewed before Jan 2021. There were 3 interview rounds.
ICP OES is a technique used for chemical analysis of chromite ore.
ICP OES stands for Inductively Coupled Plasma Optical Emission Spectroscopy.
It is a powerful analytical technique used for the determination of trace elements in a variety of matrices.
ICP OES can be used to determine the concentration of elements such as Cr, Fe, Mg, Al, and Si in chromite ore.
The technique involves the excitation of atoms in a sample usi...
ICP-OES is a technique used for elemental analysis in which a sample is vaporized and excited by a plasma to emit light.
ICP-OES stands for Inductively Coupled Plasma Optical Emission Spectroscopy.
It is used to determine the concentration of elements in a sample.
The sample is vaporized and excited by a plasma to emit light, which is then analyzed to determine the elemental composition.
ICP-OES is commonly used in environ...
Weight chemical analysis of chromite ore involves determining the percentage of various elements present in the ore.
The ore is first crushed and ground into a fine powder.
The powder is then mixed with various chemicals to dissolve the elements of interest.
The resulting solution is then analyzed using various techniques such as atomic absorption spectroscopy or inductively coupled plasma mass spectrometry.
The percentage...
I applied via Walk-in and was interviewed in Mar 2023. There were 2 interview rounds.
Rankine cycle is a thermodynamic cycle used in power plants to generate electricity.
Rankine cycle is a closed-loop cycle that uses steam to generate power.
The cycle consists of four processes: heating, vaporization, expansion, and condensation.
The efficiency of the Rankine cycle can be improved by increasing the temperature and pressure of the steam.
The Rankine cycle is commonly used in power plants to generate electri...
posted on 18 May 2020
I applied via Naukri.com and was interviewed in Nov 2019. There were 3 interview rounds.
Control valve calibration involves adjusting the valve to ensure it operates within specified parameters.
Determine the valve's operating range and desired set points
Use a calibration bench or in-line calibration equipment to adjust the valve's position and response time
Verify the valve's performance using a flow meter or pressure gauge
Document the calibration process and results for future reference
I applied via Approached by Company and was interviewed before May 2021. There were 3 interview rounds.
I applied via Referral and was interviewed in Dec 2020. There were 3 interview rounds.
Iron carbon diagram shows the relationship between carbon content and properties of steel.
The diagram helps in understanding the microstructure of steel.
It shows the different phases of steel at different carbon concentrations.
Low carbon steel has less than 0.3% carbon, while high carbon steel has more than 0.6% carbon.
Medium carbon steel has a carbon content between 0.3% and 0.6%.
The diagram also helps in determining ...
Pressure relief valve releases excess pressure to prevent damage, while pressure reducing valve reduces pressure to a desired level.
Pressure relief valve is used to protect equipment from overpressure by releasing excess pressure to the atmosphere.
Pressure reducing valve is used to reduce the pressure of a fluid to a desired level in a system.
Pressure relief valves are typically found in systems where pressure buildup ...
Hydraulic piston pumps offer higher efficiency, variable flow rates, and better control compared to fixed displacement vane pumps.
Hydraulic piston pumps have higher efficiency due to their ability to vary flow rates based on demand, reducing energy consumption.
Piston pumps provide better control over fluid flow and pressure, making them suitable for applications requiring precise operation.
Piston pumps are more durable...
I applied via Approached by Company and was interviewed before Apr 2023. There were 2 interview rounds.
No, TIA Portal is not compatible with S7-300 CPU.
TIA Portal is designed for newer Siemens PLCs like S7-1200 and S7-1500, not S7-300.
For S7-300 CPUs, Step 7 software should be used for programming.
TIA Portal offers advanced features like integrated safety, motion control, and HMI design.
S7-300 CPUs are older models with limited capabilities compared to newer PLCs.
Encoder provides digital output while resolver provides analog output.
Encoder converts mechanical motion into digital signals, resolver converts mechanical motion into analog signals.
Encoder is more accurate and provides higher resolution compared to resolver.
Resolver is more robust and reliable in harsh environments due to lack of sensitive electronics.
Examples: Encoder - optical encoder, magnetic encoder. Resolver -
I applied via Walk-in and was interviewed before Jan 2022. There were 3 interview rounds.
based on 1 interview
Interview experience
based on 21 reviews
Rating in categories
Manager
1.6k
salaries
| ₹6 L/yr - ₹20 L/yr |
Assistant Manager
1.5k
salaries
| ₹5.1 L/yr - ₹15.5 L/yr |
Senior Manager
1.2k
salaries
| ₹9.2 L/yr - ₹35 L/yr |
Associate Engineer
926
salaries
| ₹2 L/yr - ₹8 L/yr |
Junior Engineer
897
salaries
| ₹2.3 L/yr - ₹10 L/yr |
JSW Steel
Jindal Steel and Power
ArcelorMittal Nippon Steel
Jindal Stainless