i
Welspun Corp
Filter interviews by
I appeared for an interview in Sep 2023.
Ohm's Law states that the voltage (V) in a circuit is equal to the current (I) multiplied by the resistance (R).
V = I * R
Voltage is measured in volts (V)
Current is measured in amperes (A)
Resistance is measured in ohms (Ω)
Example: If a circuit has a current of 2A flowing through a resistance of 5Ω, the voltage would be 10V (2A * 5Ω = 10V)
I applied via Naukri.com and was interviewed before Mar 2021. There were 2 interview rounds.
I applied via Naukri.com and was interviewed before May 2021. There were 2 interview rounds.
A contractor is a person or company hired to perform a specific task or project for a client.
Contractors are often hired for construction projects, electrical work, plumbing, and other specialized tasks.
They are typically paid on a project-by-project basis, rather than receiving a salary or hourly wage.
Contractors may work independently or as part of a larger company.
They are responsible for providing their own tools, ...
A rectifier is an electrical device that converts alternating current (AC) to direct current (DC).
Rectifiers are commonly used in power supplies for electronic devices.
They can be made using diodes or other semiconductor devices.
Rectifiers are essential for many electronic devices to function properly.
Examples of rectifiers include bridge rectifiers, half-wave rectifiers, and full-wave rectifiers.
vvF is not a recognized term in the field of electrical engineering.
vvF is not a standard unit of measurement or abbreviation in the electrical field.
It is possible that the interviewer made a mistake or was testing the candidate's ability to admit when they don't know something.
The candidate could respond by politely asking for clarification or admitting that they are not familiar with the term.
Various methods exist to measure motor RPM, including tachometers, frequency counters, and optical sensors.
Tachometer: A device that directly measures the rotational speed of the motor shaft.
Frequency Counter: Measures the frequency of the motor's output signal, which can be converted to RPM.
Optical Sensor: Uses light beams to detect the rotation of a marked disk attached to the motor.
Stroboscope: A flashing light that...
Safety devices in conveyor systems prevent accidents and ensure smooth operation, protecting both workers and equipment.
Emergency Stop Buttons: Allow immediate shutdown of the conveyor in case of an emergency.
Safety Guards: Physical barriers that prevent access to moving parts, reducing the risk of injury.
Photoelectric Sensors: Detect objects or personnel in the conveyor's path, stopping operation if necessary.
Overload...
The negative charge of an ESP system electrode helps in attracting and collecting particulate matter from flue gases.
Electrostatic Precipitators (ESPs) use negatively charged electrodes to ionize particles in the gas stream.
The negative charge creates an electric field that attracts positively charged particles, aiding in their collection.
For example, in power plants, ESPs remove ash and other pollutants from exhaust g...
Healthy silica gel is typically blue or orange, while unhealthy silica gel turns pink or green, indicating moisture absorption.
Healthy silica gel is often blue or orange, indicating it is dry.
Unhealthy silica gel turns pink or green when it absorbs moisture.
Blue silica gel contains cobalt chloride, which changes color when wet.
Orange silica gel is a safer alternative that changes from orange to green when saturated.
Reverse forward with drive is a control method used in electrical systems to change the direction of rotation of a motor.
Reverse forward with drive is achieved by using a motor controller that can switch the polarity of the motor's power supply to change its direction of rotation.
This method is commonly used in applications where the motor needs to be able to run in both forward and reverse directions, such as in conve...
Power and control wiring of EOT crane involves connecting electrical components to ensure proper functioning.
Power wiring includes connecting the main power supply to the crane motor and other electrical components.
Control wiring involves connecting control devices such as push buttons, limit switches, and relays to control the movement of the crane.
Proper labeling and color-coding of wires is essential for easy troubl...
Work and time, reasoning,essay
230V is sufficient for most domestic and commercial applications, while 440V is used for heavy-duty industrial applications.
230V is more cost-effective and easier to install than 440V.
Most household appliances and equipment are designed to operate on 230V.
440V is used for heavy machinery and equipment that require more power.
440V is also used for long-distance power transmission.
The choice of voltage depends on the spe
MCB and DOL starter are both electrical devices used for protection and control, but they have different functions and applications.
MCB stands for Miniature Circuit Breaker and is used for circuit protection against overcurrents and short circuits.
DOL starter stands for Direct-On-Line starter and is used for starting and stopping motors.
MCB is a switch that automatically trips and disconnects the circuit when an overcu...
An electrical motor is a device that converts electrical energy into mechanical energy to perform work.
Electrical motors are used in various applications such as industrial machinery, household appliances, and vehicles.
They work on the principle of electromagnetic induction, where a current-carrying conductor experiences a force in the presence of a magnetic field.
There are different types of electrical motors, includi...
Power factor is a measure of how effectively electrical power is being used in a circuit.
Power factor is the ratio of real power (in watts) to apparent power (in volt-amperes).
It indicates the efficiency of electrical power consumption in a circuit.
A power factor of 1 means all the power is being used effectively, while a power factor less than 1 indicates wastage of power.
Inductive loads like motors and transformers h...
A DOL starter circuit diagram is used to control the starting and stopping of an electric motor.
DOL stands for Direct-On-Line.
The circuit consists of a contactor, overload relay, and start and stop buttons.
When the start button is pressed, the contactor closes and power is supplied directly to the motor.
The overload relay protects the motor from excessive current.
The stop button opens the contactor and stops the motor.
The sources of electricity include fossil fuels, nuclear power, renewable energy sources, and batteries.
Fossil fuels such as coal, oil, and natural gas are commonly used to generate electricity in power plants.
Nuclear power plants use nuclear reactions to produce electricity.
Renewable energy sources like solar power, wind power, hydroelectric power, and geothermal power can generate electricity.
Batteries can store and
Insulators are materials that do not conduct electricity.
Insulators are substances that prevent the flow of electric current.
They have high resistance to the flow of electrons.
Insulators are used to protect against electric shocks and to prevent short circuits.
Examples of insulators include rubber, plastic, glass, and ceramic.
Insulators are commonly used in electrical wiring, circuit boards, and electrical equipment.
Semiconductors are used in various electronic devices and systems.
Semiconductors are used in computers and other digital devices for processing and memory.
They are used in telecommunication systems for signal amplification and transmission.
Semiconductors are used in power electronics for controlling and converting electrical energy.
They are used in lighting systems such as LEDs and OLEDs.
Semiconductors are used in sens...
Resistance is the measure of opposition to the flow of electric current in a material.
Resistance is measured in ohms (Ω).
It is caused by the collisions of electrons with atoms and other electrons in the material.
Resistance can be influenced by factors such as temperature, length, and cross-sectional area of the material.
Ohm's Law states that the current flowing through a conductor is directly proportional to the voltag...
The unit of resistance is ohm (Ω).
The unit of resistance is named after the German physicist Georg Simon Ohm.
Resistance is a measure of how much a material or device opposes the flow of electric current.
The symbol for ohm is the Greek letter omega (Ω).
Resistance can be calculated using Ohm's Law: R = V/I, where R is resistance, V is voltage, and I is current.
Common examples of resistance include resistors, light bulbs,
AC and DC shocks can both be dangerous, but AC shocks are generally considered more dangerous.
AC shocks can cause muscle contractions, making it difficult to let go of the source of the shock.
AC shocks can also cause ventricular fibrillation, a potentially fatal condition where the heart's rhythm becomes irregular.
DC shocks are more likely to cause burns and tissue damage at the point of contact.
However, the severity o...
I applied via Company Website and was interviewed in Oct 2021. There was 1 interview round.
based on 1 interview
Interview experience
based on 4 reviews
Rating in categories
Associate Manager
154
salaries
| ₹4 L/yr - ₹10 L/yr |
Engineer
80
salaries
| ₹2 L/yr - ₹6.5 L/yr |
Assistant Manager
73
salaries
| ₹4.8 L/yr - ₹12.1 L/yr |
Manager
58
salaries
| ₹6 L/yr - ₹17.5 L/yr |
Assistant Engineer
48
salaries
| ₹1.6 L/yr - ₹5 L/yr |
Tata Steel
JSW Steel
Jindal Steel and Power
Jindal Stainless