i
Jindal Saw
Filter interviews by
Reverse forward with drive is a control method used in electrical systems to change the direction of rotation of a motor.
Reverse forward with drive is achieved by using a motor controller that can switch the polarity of the motor's power supply to change its direction of rotation.
This method is commonly used in applications where the motor needs to be able to run in both forward and reverse directions, such as in conve...
Power and control wiring of EOT crane involves connecting electrical components to ensure proper functioning.
Power wiring includes connecting the main power supply to the crane motor and other electrical components.
Control wiring involves connecting control devices such as push buttons, limit switches, and relays to control the movement of the crane.
Proper labeling and color-coding of wires is essential for easy troubl...
I applied via Naukri.com and was interviewed before Mar 2021. There were 2 interview rounds.
I applied via Naukri.com and was interviewed before May 2021. There were 2 interview rounds.
Various methods exist to measure motor RPM, including tachometers, frequency counters, and optical sensors.
Tachometer: A device that directly measures the rotational speed of the motor shaft.
Frequency Counter: Measures the frequency of the motor's output signal, which can be converted to RPM.
Optical Sensor: Uses light beams to detect the rotation of a marked disk attached to the motor.
Stroboscope: A flashing light that...
Safety devices in conveyor systems prevent accidents and ensure smooth operation, protecting both workers and equipment.
Emergency Stop Buttons: Allow immediate shutdown of the conveyor in case of an emergency.
Safety Guards: Physical barriers that prevent access to moving parts, reducing the risk of injury.
Photoelectric Sensors: Detect objects or personnel in the conveyor's path, stopping operation if necessary.
Overload...
The negative charge of an ESP system electrode helps in attracting and collecting particulate matter from flue gases.
Electrostatic Precipitators (ESPs) use negatively charged electrodes to ionize particles in the gas stream.
The negative charge creates an electric field that attracts positively charged particles, aiding in their collection.
For example, in power plants, ESPs remove ash and other pollutants from exhaust g...
Healthy silica gel is typically blue or orange, while unhealthy silica gel turns pink or green, indicating moisture absorption.
Healthy silica gel is often blue or orange, indicating it is dry.
Unhealthy silica gel turns pink or green when it absorbs moisture.
Blue silica gel contains cobalt chloride, which changes color when wet.
Orange silica gel is a safer alternative that changes from orange to green when saturated.
230V is sufficient for most domestic and commercial applications, while 440V is used for heavy-duty industrial applications.
230V is more cost-effective and easier to install than 440V.
Most household appliances and equipment are designed to operate on 230V.
440V is used for heavy machinery and equipment that require more power.
440V is also used for long-distance power transmission.
The choice of voltage depends on the spe
I applied via Company Website and was interviewed in Oct 2021. There was 1 interview round.
I am a certified electrician with a diploma in Electrical Engineering and 5 years of hands-on experience.
Certified electrician
Diploma in Electrical Engineering
5 years of hands-on experience
The distance between the core and armature in an HT motor varies depending on the specific motor design.
The distance between the core and armature is determined by the motor manufacturer and can vary based on factors such as motor size, voltage rating, and application.
In general, the core and armature are designed to be close enough to ensure efficient magnetic coupling but far enough to prevent physical contact and fr...
Ohm
Unit of resistance in electrical circuits
Symbol is Ω (omega)
Named after German physicist Georg Simon Ohm
Measured using an ohmmeter
The unit of current is Ampere (A)
The unit of current is Ampere (A)
Current is the flow of electric charge in a circuit
1 Ampere is equal to 1 Coulomb per second
Commonly used prefixes for current are milliampere (mA) and microampere (μA)
A motor is a device that converts electrical energy into mechanical energy to produce motion.
Motors are commonly used in various applications such as industrial machinery, household appliances, and vehicles.
There are different types of motors including AC motors, DC motors, and servo motors.
Motors consist of a rotor, stator, and various components such as coils, magnets, and brushes.
Examples of motors include electric
ACB stands for Air Circuit Breaker, a type of circuit breaker that operates in the air instead of oil or gas.
ACB is used to protect electrical circuits from overloads and short circuits.
It automatically cuts off the power supply when a fault is detected.
ACBs are commonly used in industrial and commercial buildings.
Examples of ACB manufacturers include Siemens, Schneider Electric, and ABB.
based on 2 interviews
Interview experience
based on 14 reviews
Rating in categories
Assistant Manager
405
salaries
| ₹4.4 L/yr - ₹13.9 L/yr |
Senior Executive
303
salaries
| ₹3.5 L/yr - ₹8.8 L/yr |
Deputy Manager
260
salaries
| ₹6.1 L/yr - ₹17 L/yr |
Senior Engineer
189
salaries
| ₹3 L/yr - ₹9 L/yr |
Manager
132
salaries
| ₹8.2 L/yr - ₹19.6 L/yr |
Tata Steel
JSW Steel
Jindal Steel and Power
ArcelorMittal Nippon Steel