Utracon Structural Systems Site Engineer Interview Questions and Answers

To conduct a slump test, fill a metal cone with concrete, compact it, remove the cone, and measure the slump.

• Clean the cone and moisten it with water.

• Fill the cone with concrete in three layers, compacting each layer with a rod.

• Remove the cone and place it next to the slump.

• Measure the difference in height between the top of the cone and the highest point of the slump.

• Repeat the test at least twice and take the average

Minimum cement content for M25 Grade is 300 kg/m³.

• M25 grade concrete has a minimum compressive strength of 25 MPa.

• The water-cement ratio should not exceed 0.50.

• The cement content can vary based on factors such as aggregate size, shape, and grading.

• The cement content should be adjusted based on the results of trial mixes.

I expect a competitive salary based on industry standards and my experience.

• I have researched the industry standards for QA QC Engineer salaries

• I have taken into account my experience and skills

• I am open to negotiation based on the specific job responsibilities and benefits package

• I am looking for a fair and competitive salary that reflects my value to the company

Process of variation involves documenting and analyzing changes in project scope, cost, or schedule.

• Variations are changes to the original scope, cost, or schedule of a project

• Variations must be documented and approved by the relevant parties

• The impact of variations on project budget and timeline must be analyzed

• Examples of variations include design changes, unforeseen site conditions, and client requests

Compressor troubleshooting involves identifying and resolving issues with the compressor in a system.

• Check for leaks in the system

• Inspect the compressor for damage or wear

• Check the electrical connections and wiring

• Monitor the pressure and temperature readings

• Clean or replace air filters

• Check the oil level and quality

• Inspect the belts and pulleys for wear or damage