AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
UTILITY PROJECTS AND SERVICES Estimation Engineer Interview Questions and Answers
UTILITY PROJECTS AND SERVICES Estimation Engineer Interview Experiences
1 interview found
I applied via Referral and was interviewed before Jun 2021. There were 4 interview rounds.
(2 Questions)
- Q1. What is first, second and third law of thermodynamics
- Ans.
The first law states that energy cannot be created or destroyed, the second law states that entropy always increases in a closed system, and the third law states that it is impossible to reach absolute zero.
First law: Conservation of energy
Second law: Entropy always increases
Third law: Absolute zero is unattainable
- Q2. What is entropy, pressure et
- Ans.
Entropy is a measure of disorder or randomness in a system, while pressure is the force exerted per unit area.
Entropy is a thermodynamic property that describes the degree of disorder or randomness in a system.
It is denoted by the symbol S and is measured in units of joules per kelvin.
Pressure is the force exerted per unit area and is measured in units of pascals.
It is denoted by the symbol P and is a measure of the in...
(1 Question)
- Q1. 1) Math related questions like square of a number etc 2) What is your favourite subject
(2 Questions)
- Q1. What is empathy? When can you join?
- Q2. Do you have a job in hand etc?
Interview Preparation Tips
- Thermodynamics
- Maths
2) Math should be strong
Top trending discussions
Interview questions from similar companies
Interview Questionnaire
1 Question
- Q1. Hard core techanical
Senior Engineer Interview Questions & Answers
L&T Energy Hydrocarbon
Anonymous
posted on 11 Apr 2021
I applied via Walk-in and was interviewed before Apr 2020. There was 1 interview round.
Interview Questionnaire
6 Questions
- Q1. Can you explain Man day
- Ans.
A man day is a unit of measure representing the amount of work one person can complete in a single day.
Typically used in project management to estimate labor costs and timelines.
One man day usually equals 8 hours of work.
For example, if a task requires 40 man days, it would take one person 40 days or 5 people 8 days to complete.
Helps in resource allocation and planning for projects.
- Q2. Can you explain manpower mobilization.
- Ans.
Manpower mobilization refers to the process of deploying and managing personnel for a specific project or task.
Identifying the required personnel for a project
Recruiting and hiring personnel
Training and orienting personnel to the project
Assigning roles and responsibilities to personnel
Managing personnel performance and productivity
Ensuring compliance with labor laws and regulations
Examples include mobilizing a construc...
- Q3. How to cost control in project
- Ans.
Cost control in project can be achieved through effective planning, monitoring and controlling of project expenses.
Create a detailed project budget and stick to it
Track expenses regularly and adjust budget as needed
Identify and eliminate unnecessary expenses
Negotiate with vendors for better pricing
Implement cost-saving measures without compromising quality
Use project management tools to monitor expenses and progress
Reg...
- Q4. Can you explain how to handle clinent
- Ans.
Handling clients requires effective communication, understanding their needs, and providing timely solutions.
Listen actively to their concerns and requirements
Communicate clearly and professionally
Provide timely updates and solutions
Build a strong relationship based on trust and respect
Be proactive in identifying and addressing potential issues
Ensure customer satisfaction by going above and beyond expectations
- Q5. Flow chart for manpower mobilization
- Ans.
Manpower mobilization flow chart involves identifying needs, planning, recruitment, training, and deployment.
Identify the need for manpower
Plan the recruitment process
Source and screen candidates
Conduct interviews and assessments
Select and hire candidates
Provide training and orientation
Deploy manpower to required locations
- Q6. Prepared organisation chat for project handling
Interview Preparation Tips
I applied via Company Website and was interviewed before Sep 2020. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. They asked for previous company work management, work culture, work timing & some technical questions
Interview Preparation Tips
Just share your work experience
I applied via Referral and was interviewed in Dec 2020. There were 4 interview rounds.
Interview Questionnaire
3 Questions
- Q1. Cube Compressive achieving Percentage time periods?
- Ans.
Cube compressive achieving percentage time periods
The question is asking about the percentage of time periods in which cube compressive strength is achieved
Cube compressive strength refers to the ability of a cube-shaped material to withstand compression
The answer may involve calculating the percentage of time periods in which the cube meets the required compressive strength
Examples of data points needed: time periods,...
- Q2. M20 grade and M means and 20 means and unit
- Q3. 1:1.5:3 ,M-Mix,20 -Compresive strength,N/mm²
Interview Preparation Tips
Senior Engineer Interview Questions & Answers
URC Construction
Prakash Swamiappan
posted on 31 Jan 2024
About site experience
(1 Question)
- Q1. Site execution technical
I applied via Naukri.com and was interviewed in Aug 2023. There were 3 interview rounds.
(1 Question)
- Q1. Civil engineering related Questions
(1 Question)
- Q1. Salary related discussion
Selected
I applied via Approached by Company and was interviewed before Nov 2022. There were 3 interview rounds.
(2 Questions)
- Q1. Basics of what ur past experience
- Q2. Basic of shuttering and concreting
(1 Question)
- Q1. What u r past experience
Interview Preparation Tips
No fixed timing of work. Only top management is supportive down the line everyone is of cheap mentality. Not recommend to join the company as u will regret later. Not even cable to achieve 1 star
dilipkumar sharma
(2 Questions)
- Q1. Field related building materials
- Q2. Building materials
Interview Preparation Tips
Selected
I appeared for an interview in Sep 2024, where I was asked the following questions.
- Q1. What a IS Code of Design Mix ?
- Ans.
IS Code of Design Mix refers to Indian Standards for concrete mix design, ensuring quality and performance in construction.
IS 456:2000 provides guidelines for plain and reinforced concrete design.
IS 10262:2019 outlines the procedure for concrete mix design.
Mix design considers factors like workability, strength, and durability.
Example: A mix design for M25 concrete specifies a ratio of 1:1:2 (Cement:Sand:Aggregate).
The...
- Q2. What are the Welding method of steel?
- Ans.
Welding methods for steel include various techniques like MIG, TIG, and Stick welding, each suited for different applications.
MIG Welding (Gas Metal Arc Welding) - Uses a continuous wire feed and is ideal for thin to medium thickness steel.
TIG Welding (Gas Tungsten Arc Welding) - Provides high precision and is suitable for thin materials and stainless steel.
Stick Welding (Shielded Metal Arc Welding) - Versatile and com...
- Q3. What are the advantage of steel shuttering?
- Ans.
Steel shuttering offers durability, reusability, and precision in construction, enhancing project efficiency and quality.
Durability: Steel shuttering can withstand harsh weather conditions and heavy loads, making it suitable for large-scale projects.
Reusability: Unlike timber, steel can be reused multiple times, reducing material costs over time.
Precision: Steel shuttering provides a high level of accuracy in dimension...
- Q4. What are the benefits of using Composite Plate?
- Ans.
Composite plates offer enhanced strength, lightweight properties, and design flexibility for various applications.
High strength-to-weight ratio: Composite plates are significantly lighter than metals, making them ideal for aerospace applications.
Corrosion resistance: They resist environmental degradation, suitable for marine and chemical industries.
Design flexibility: Can be molded into complex shapes, allowing for inn...
- Q5. How do you lay blocks in block work
- Ans.
Laying blocks involves precise techniques for alignment, mortar application, and ensuring structural integrity.
Prepare the foundation: Ensure the base is level and clean before starting.
Mix mortar: Use the right ratio of cement, sand, and water for optimal adhesion.
Lay the first block: Start at a corner, applying mortar to the bottom and sides.
Check alignment: Use a level to ensure blocks are straight and even.
Stagger ...
Interview Preparation Tips
UTILITY PROJECTS AND SERVICES Interview FAQs
Tell us how to improve this page.
UTILITY PROJECTS AND SERVICES Interviews By Designations
- UTILITY PROJECTS AND SERVICES Electrical Technician Interview Questions
- UTILITY PROJECTS AND SERVICES Facility Manager Interview Questions
- UTILITY PROJECTS AND SERVICES Project Manager Interview Questions
- UTILITY PROJECTS AND SERVICES Maintenance Technician Interview Questions
- UTILITY PROJECTS AND SERVICES Estimation Engineer Interview Questions
- UTILITY PROJECTS AND SERVICES Shift Engineer Interview Questions
- UTILITY PROJECTS AND SERVICES Mechanical Engineer Interview Questions
- UTILITY PROJECTS AND SERVICES Help Desk Executive Interview Questions
- Show more
Interview Questions for Popular Designations
- Senior Engineer Interview Questions
- Quality Engineer Interview Questions
- Junior Engineer Interview Questions
- Civil Site Engineer Interview Questions
- Site Engineer Interview Questions
- Civil Engineer Interview Questions
- Assistant Engineer Interview Questions
- Billing Engineer Interview Questions
- Show more
Interview Questions from Similar Companies
UTILITY PROJECTS AND SERVICES Estimation Engineer Reviews and Ratings
based on 2 reviews
Rating in categories
|
Facility Manager
50
salaries
|  ₹4.5 L/yr - ₹9.1 L/yr |
|
Junior Engineer
26
salaries
| ₹2 L/yr - ₹4 L/yr |
|
Shift Engineer
20
salaries
| ₹2.2 L/yr - ₹4.5 L/yr |
|
Electrical Technician
20
salaries
| ₹1.7 L/yr - ₹3.3 L/yr |
|
Electrical Engineer
15
salaries
| ₹2 L/yr - ₹4 L/yr |
L&T Energy Hydrocarbon
AECOM
Sterling & Wilson
Apco Infratech
- Home >
- Interviews >
- UTILITY PROJECTS AND SERVICES Interview Questions
