Premium Employer

i

This company page is being actively managed by TÜV SÜD Team. If you also belong to the team, you can get access from here

TÜV SÜD Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

TÜV SÜD Inspection Engineer Interview Questions, Process, and Tips

Updated 1 Oct 2024

Top TÜV SÜD Inspection Engineer Interview Questions and Answers

TÜV SÜD Inspection Engineer Interview Experiences

6 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected
Round 1 - Technical 

(2 Questions)

  • Q1. Material specification, Details, drawings, code references.
  • Q2. How to prepare welder qualification as per asme?
  • Ans. 

    To prepare welder qualification as per ASME, follow ASME Section IX guidelines, conduct welder performance qualification tests, and maintain records.

    • Follow ASME Section IX guidelines for welder qualification

    • Conduct welder performance qualification tests such as visual examination, bend test, and radiographic testing

    • Maintain records of welder qualifications and requalification tests

    • Ensure welders are trained and certifi...

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. Variables, P No?
Round 3 - HR 

(1 Question)

  • Q1. Salary expectation?
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. What are documents required for the inspection of material and work
  • Ans. 

    The documents required for the inspection of material and work include specifications, drawings, test plans, inspection reports, and certificates.

    • Specifications: Provide detailed information about the required standards and quality of the material and work.

    • Drawings: Illustrate the design and dimensions of the material and work to be inspected.

    • Test plans: Outline the procedures and criteria for conducting tests on the m...

  • Answered by AI
  • Q2. How will you do the inspection of transformer before commissioning.
  • Ans. 

    Before commissioning a transformer, inspection can be done by following these steps:

    • Check for any physical damage or signs of overheating on the transformer

    • Inspect the insulation system for any signs of degradation or contamination

    • Verify the correct installation of all components and connections

    • Perform electrical tests to ensure proper functioning and performance

    • Check the oil level and quality in oil-filled transformer...

  • Answered by AI

Inspection Engineer Interview Questions Asked at Other Companies

asked in RITES
Q1. What is least count of any measuring instrument?
asked in Adani Gas
Q2. WHAT YOUR MDPE PIPE TOP COVER OF GROUND LEVEL
Q3. What is full process of Diaphragm wall construction?
asked in RITES
Q4. Why tractors have larger rear wheels?
Q5. What is difference between Top bottom construction and Bottom Top ... read more

I applied via Naukri.com and was interviewed in Jun 2022. There were 8 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. What is your experience ex-company .
Round 3 - Technical 

(1 Question)

  • Q1. Who is the department
  • Ans. Tata chemicals Ltd. And TUV SUD Pvt. Ltd.
  • Answered Anonymously
Round 4 - Technical 

(1 Question)

  • Q1. I have experience in technical.
  • Ans. Give me one chance for this job .
  • Answered Anonymously
Round 5 - One-on-one 

(1 Question)

  • Q1. This is the same job.
  • Ans. Yes, give me one round chance.
  • Answered Anonymously
Round 6 - Aptitude Test 

Your experience of ex-company so other wise test submit.

Round 7 - Group Discussion 

Group discussion is the very important .

Round 8 - Group Discussion 

TUV SUD is the good company.

Interview Preparation Tips

Interview preparation tips for other job seekers - TUV SUD the good company . And give me one chance othe project.

I applied via Approached by Company and was interviewed before Aug 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. What is emabnkment ?and please explain
  • Ans. 

    An embankment is a raised structure made of soil or other materials used to support a roadway or railway track.

    • Embankments are commonly used in transportation infrastructure to raise the level of the roadway or railway track above the surrounding terrain.

    • They are typically made of soil, rock, or other materials that are compacted and shaped to form a stable structure.

    • Embankments can also be used to control erosion alon...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident ,and keep basic knowledge, regarding is codes,concept and field experience

TÜV SÜD interview questions for designations

 EI Inspection Engineer

 (1)

 Construction Engineer

 (1)

 Civil Engineer

 (1)

 Junior Engineer Civil

 (1)

 Senior Quality Engineer

 (1)

 Construction Management

 (1)

 Project Engineer

 (2)

 Design Engineer

 (1)

I applied via Naukri.com and was interviewed before Jan 2021. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. What's your last experience
  • Q2. What's your current ctc
  • Q3. Are you married

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and ans all question confidently

Interview Questionnaire 

2 Questions

  • Q1. This is how everyone tests MDPE how RFC do and later asked anything else.
  • Q2. Etc.

Inspection Engineer Jobs at TÜV SÜD

View all

Interview questions from similar companies

Interview Questionnaire 

3 Questions

  • Q1. Roles and responsibilities of an inspection engineer.
  • Ans. 

    An inspection engineer is responsible for ensuring the safety, quality, and compliance of equipment, structures, or systems.

    • Conducting inspections to identify defects or non-compliance

    • Developing inspection procedures and protocols

    • Analyzing inspection data and preparing reports

    • Collaborating with other engineers and stakeholders

    • Ensuring compliance with regulations and standards

    • Implementing corrective actions to address i...

  • Answered by AI
  • Q2. If you have worked with consistency as an inspection engineer, I believe you may have no issues answering the question.
  • Q3. Your experience and your attitude towards your work speaks.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be true to your knowledge and present the same.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(1 Question)

  • Q1. Last salary & Work Experience
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Mar 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all Resume tips
Round 2 - One-on-one 

(3 Questions)

  • Q1. Related to gas pipeline
  • Q2. What is required data for fire & safety
  • Ans. 

    Data required for fire & safety

    • Building layout and floor plans

    • Location of fire exits and emergency equipment

    • Fire suppression systems and equipment

    • Fire alarm and detection systems

    • Emergency response plan and procedures

  • Answered by AI
  • Q3. In which type of fitting use during charging
  • Ans. 

    Fittings used during charging depend on the type of refrigerant and system design.

    • The type of refrigerant and system design determine the fittings used during charging.

    • Common fittings include flare, sweat, and quick-connect fittings.

    • Flare fittings are commonly used in air conditioning systems.

    • Sweat fittings are commonly used in refrigeration systems.

    • Quick-connect fittings are commonly used in automotive air conditionin...

  • Answered by AI
Round 3 - One-on-one 

(1 Question)

  • Q1. What is depth required fir igl has laying
  • Ans. 

    The depth required for IGL gas laying depends on various factors such as soil type, traffic load, and depth of other utilities.

    • The depth should be sufficient to prevent damage from external factors such as traffic load and soil type.

    • The depth should also be deep enough to avoid interference with other utilities.

    • The depth requirement may vary depending on the location and local regulations.

    • For example, in Delhi, the min...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Gas fitting code for tee, elbow, what are thing required during charging, commissioning etc
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Feb 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Do not use an unprofessional email address such as cool_boy@email.com. It shows a lack of professionalism by the candidate.
View all Resume tips
Round 2 - HR 

(2 Questions)

  • Q1. Q- about current salary and expected salary?
  • Ans. 

    It is important to discuss current and expected salary during the interview process.

    • Be honest and transparent about your current salary.

    • Research the market rates for the position and industry to determine a reasonable expected salary.

    • Consider factors such as your experience, qualifications, and the responsibilities of the role when discussing expected salary.

    • Highlight any additional skills or certifications that may ju...

  • Answered by AI
  • Q2. Q- reason why are you change the job?
  • Ans. 

    I am changing jobs for better career growth and opportunities.

    • Seeking new challenges and opportunities to expand my skills and knowledge.

    • Looking for a company that aligns with my values and offers a better work-life balance.

    • Wanting to work in a more dynamic and innovative environment.

    • Desire to take on more responsibilities and contribute to larger projects.

    • Seeking better career growth and advancement opportunities.

    • Want...

  • Answered by AI
Round 3 - Technical 

(3 Questions)

  • Q1. Q. Types of valve and it's function?
  • Ans. 

    Valves are devices used to control the flow of fluids or gases in a system.

    • Gate valve: used to start or stop the flow of fluid by lifting or lowering a gate

    • Ball valve: uses a rotating ball with a hole to control the flow

    • Check valve: allows flow in one direction and prevents backflow

    • Globe valve: controls flow by raising or lowering a disc against the flow

    • Butterfly valve: uses a disc to control flow by rotating it

  • Answered by AI
  • Q2. Q. QAP, WPS and DFT description?
  • Ans. 

    QAP, WPS, and DFT are important documents used in inspection engineering.

    • QAP stands for Quality Assurance Plan, which outlines the procedures and requirements for ensuring quality in a project or process.

    • WPS stands for Welding Procedure Specification, which provides detailed instructions for performing welding operations.

    • DFT stands for Dry Film Thickness, which refers to the thickness of a coating or paint applied to a...

  • Answered by AI
  • Q3. Q. What is represented by W,H,R,P and V?
  • Ans. 

    W, H, R, P, and V represent different variables or parameters.

    • W could represent weight or width

    • H could represent height

    • R could represent radius

    • P could represent pressure

    • V could represent volume

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Intertek Inspection Engineer interview:
  • NDT Inspection
  • ASME Codes

Skills evaluated in this interview

Contribute & help others!
anonymous
You can choose to be anonymous

TÜV SÜD Interview FAQs

How many rounds are there in TÜV SÜD Inspection Engineer interview?
TÜV SÜD interview process usually has 3-4 rounds. The most common rounds in the TÜV SÜD interview process are Technical, One-on-one Round and Group Discussion.
How to prepare for TÜV SÜD Inspection Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at TÜV SÜD. The most common topics and skills that interviewers at TÜV SÜD expect are Inspection Engineering, Inspection, NDT, Quality Assurance and ASNT Level II.
What are the top questions asked in TÜV SÜD Inspection Engineer interview?

Some of the top questions asked at the TÜV SÜD Inspection Engineer interview -

  1. What are documents required for the inspection of material and w...read more
  2. How will you do the inspection of transformer before commissioni...read more
  3. How to prepare welder qualification as per as...read more

Recently Viewed

JOBS

Browse jobs

Discover jobs you love

COMPANY BENEFITS

KNR Constructions

20 benefits

COMPANY BENEFITS

IRB Infrastructure

60 benefits

COMPANY BENEFITS

Dilip Buildcon

304 benefits

COMPANY BENEFITS

Dilip Buildcon

304 benefits

INTERVIEWS

Gmmco

No Interviews

JOBS

Matrix Intertech

No Jobs

INTERVIEWS

TÜV SÜD

No Interviews

INTERVIEWS

Gmmco

No Interviews

INTERVIEWS

TÜV SÜD

No Interviews

Tell us how to improve this page.

TÜV SÜD Inspection Engineer Interview Process

based on 4 interviews

Interview experience

5
  
Excellent
View more
Join TÜV SÜD Add value. Inspire trust.

Interview Questions from Similar Companies

Cummins Interview Questions
4.3
 • 231 Interviews
John Deere Interview Questions
4.1
 • 228 Interviews
Caterpillar Inc Interview Questions
4.3
 • 178 Interviews
Bureau Veritas Interview Questions
3.9
 • 113 Interviews
SGS Interview Questions
3.9
 • 91 Interviews
Atlas Copco Interview Questions
4.2
 • 78 Interviews
TechnipFMC Interview Questions
4.0
 • 70 Interviews
Hilti Interview Questions
3.5
 • 60 Interviews
Intertek Interview Questions
3.8
 • 50 Interviews
View all
TÜV SÜD Inspection Engineer Salary
based on 204 salaries
₹2.2 L/yr - ₹9 L/yr
8% more than the average Inspection Engineer Salary in India
View more details

TÜV SÜD Inspection Engineer Reviews and Ratings

based on 78 reviews

3.7/5

Rating in categories

3.6

Skill development

3.5

Work-life balance

3.5

Salary

3.4

Job security

3.6

Company culture

3.0

Promotions

3.6

Work satisfaction

Explore 78 Reviews and Ratings
Inspection Engineer

Mumbai,

Pune

+1

6-11 Yrs

₹ 5-8 LPA

Explore more jobs
Inspection Engineer
204 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
106 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Lead Auditor
89 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Field Engineer
86 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Analyst
82 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare TÜV SÜD with

Bureau Veritas

3.9
Compare

DNV GL

4.3
Compare

Intertek

3.8
Compare

SGS

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview