i
TÜV SÜD
Filter interviews by
Clear (1)
I applied via Referral and was interviewed in Nov 2022. There were 2 interview rounds.
HPLC and GC differ in their mobile phase, stationary phase, and sample types. GC uses a gas phase while HPLC uses a liquid phase.
HPLC uses a liquid mobile phase while GC uses a gas mobile phase
GC uses a packed column while HPLC uses a solid or porous stationary phase
GC is used for volatile and semi-volatile compounds while HPLC is used for non-volatile compounds
Chapters studied in MSC depend on the program and universi...
To prepare a 1M solution, dissolve the molecular weight of the solute in 1 liter of solvent.
Determine the molecular weight of the solute
Measure 1 liter of solvent
Dissolve the calculated amount of solute in the solvent
Mix thoroughly to ensure homogeneity
Both HPLC and GC have their own advantages and limitations, and the choice depends on the specific analytical requirements.
HPLC is better for analyzing polar and non-volatile compounds, while GC is better for analyzing volatile compounds.
HPLC is more sensitive and can detect lower concentrations of analytes, while GC has a faster analysis time.
The choice between HPLC and GC also depends on the sample matrix and the req...
UV stands for ultraviolet and the principle of UV is the absorption of light in the UV region by molecules.
UV spectroscopy is used to determine the concentration of a substance in a sample by measuring the amount of UV light absorbed by the sample.
The principle of UV is based on the fact that molecules absorb light in the UV region of the electromagnetic spectrum.
UV spectroscopy is commonly used in analytical chemistry
Detectors used in HPLC, GC and UV include UV-Vis, fluorescence, refractive index, mass spectrometry, and flame ionization.
UV-Vis detectors measure the absorbance of light by the sample at a specific wavelength.
Fluorescence detectors measure the fluorescence emitted by the sample when excited by light.
Refractive index detectors measure the change in refractive index of the mobile phase caused by the sample.
Mass spectrom...
Top trending discussions
I applied via Referral and was interviewed before Jul 2023. There were 2 interview rounds.
Education and work experience
Yes, I am willing to relocate anywhere in India for the right opportunity.
I am open to exploring new locations and cultures.
I understand the importance of being flexible in order to advance in my career.
I have previous experience of relocating for work purposes.
I am excited about the prospect of living and working in different parts of India.
My expected salary range is $50,000 to $60,000 per year based on my experience and qualifications.
Research industry standards for Quality Inspector salaries
Consider cost of living in the area
Factor in years of experience and relevant certifications
Negotiate based on additional benefits offered
BIS stands for Bureau of Indian Standards.
BIS is the national standards body of India.
It develops and publishes standards for various products and services.
Examples of BIS standards include IS 456 for concrete and IS 2062 for steel.
ISO stands for International Organization for Standardization.
ISO is a non-governmental organization that develops and publishes international standards.
It ensures products and services are safe, reliable, and of good quality.
Examples of ISO standards include ISO 9001 for quality management and ISO 14001 for environmental management.
posted on 11 May 2024
I applied via LinkedIn and was interviewed before May 2023. There was 1 interview round.
I was interviewed in Jul 2021.
I applied via Walk-in and was interviewed in Jan 2024. There were 2 interview rounds.
Maths Questions,about our course related Questions,5s, safety related questions
I was interviewed in Aug 2024.
The least count of a lathe machine is the smallest measurement that can be read or measured by the machine.
The least count of a lathe machine is typically determined by the number of divisions on the main scale and the number of divisions on the Vernier scale.
For example, if the main scale has 1 mm divisions and the Vernier scale has 10 divisions that cover 9 mm, the least count would be 0.1 mm.
The least count is impor...
The tool used for boring machine is called a boring bar.
Boring bar is a cutting tool used in machining to create holes with precise dimensions and smooth finishes.
It is commonly used in metalworking and woodworking industries.
Examples of boring bars include solid carbide bars, indexable insert bars, and adjustable bars.
I applied via Campus Placement and was interviewed before Dec 2022. There were 2 interview rounds.
I applied via Campus Placement and was interviewed before Oct 2023. There were 2 interview rounds.
I'm descision about product project what need to employees to project how to manage shift....aslo A,B,C what give to safety leady employees....and how to work as a family is in one roof
I am open to discussing salary based on the responsibilities and expectations of the role.
I believe that compensation should be fair and reflective of the value I bring to the company.
I am willing to negotiate based on the benefits package and opportunities for growth within the company.
I am open to discussing salary range during the interview process to ensure alignment with expectations.
I was interviewed in Sep 2021.
Inspection Engineer
204
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
106
salaries
| ₹0 L/yr - ₹0 L/yr |
Lead Auditor
89
salaries
| ₹0 L/yr - ₹0 L/yr |
Field Engineer
86
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Analyst
82
salaries
| ₹0 L/yr - ₹0 L/yr |
Bureau Veritas
DNV GL
Intertek
SGS