Premium Employer

i

This company page is being actively managed by TÜV SÜD Team. If you also belong to the team, you can get access from here

TÜV SÜD Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

TÜV SÜD Design Engineer Interview Questions and Answers

Updated 2 Sep 2024

TÜV SÜD Design Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Not Selected

I applied via Referral and was interviewed before Sep 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Questions on logical and quants

Round 2 - Technical 

(2 Questions)

  • Q1. What is Bernoulli principle?
  • Ans. 

    Bernoulli principle states that an increase in the speed of a fluid occurs simultaneously with a decrease in pressure or a decrease in the fluid's potential energy.

    • States that as the speed of a fluid increases, its pressure decreases

    • Used to explain lift in airplane wings

    • Applies to various fluid dynamics situations such as flow through pipes

  • Answered by AI
  • Q2. What is stress and how it can be measured?
  • Ans. 

    Stress is a force acting on a material that causes deformation. It can be measured using techniques like strain gauges and load cells.

    • Stress is a measure of the internal forces within a material resisting deformation.

    • It is typically measured in units of force per unit area, such as Pascals or pounds per square inch.

    • Common methods of measuring stress include strain gauges, load cells, and extensometers.

    • Stress can be cat...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be strong at your basics

Design Engineer Jobs at TÜV SÜD

View all

Interview questions from similar companies

Interview Questionnaire 

4 Questions

  • Q1. Instrumentation Basics
  • Q2.  DCS Architecture for various Projects handled in my career
  • Ans. 

    I have worked on various DCS architectures in my career, including those for chemical plants and power plants.

    • Designed and implemented DCS architecture for a chemical plant project

    • Developed DCS architecture for a power plant project

    • Worked on DCS architecture for a water treatment plant project

    • Collaborated with team to create DCS architecture for a pharmaceutical plant project

  • Answered by AI
  • Q3. Boiler Process and Logic Configurations
  • Q4. Package Negotiation

Interview Preparation Tips

Round: Resume Shortlist
Experience: DCS and Industrial Automation

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Mar 2024. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Basic compressor details & system

Interview Preparation Tips

Topics to prepare for Atlas Copco Project Engineer interview:
  • Compressors
Interview preparation tips for other job seekers - Join firm

I applied via LinkedIn and was interviewed in Mar 2022. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Overall current role and how much you know about your current role
  • Q2. Be frank and tell whatever you know, dont be oversmart and dont try to give fake answers
Round 2 - Technical 

(1 Question)

  • Q1. Same questions as previous

Interview Preparation Tips

Interview preparation tips for other job seekers - Be genuine , don't give fake answers. You can say no if you don't know something

I applied via Recruitment Consultant and was interviewed in Apr 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. How was the Interview Process?

Interview Preparation Tips

Interview preparation tips for other job seekers - Please do not show off during interview.Be transparent
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all Resume tips
Round 2 - HR 

(1 Question)

  • Q1. Tell me about yourself.
Round 3 - Technical 

(1 Question)

  • Q1. Tech experience needed more

Interview Preparation Tips

Interview preparation tips for other job seekers - More technical experience needed
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Indeed and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Related to previous work
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed in Dec 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all Resume tips
Round 2 - Technical 

(11 Questions)

  • Q1. Introduce yourself briefly?
  • Ans. 

    I am a highly skilled and experienced Project Engineer with a strong background in managing complex engineering projects.

    • Over 10 years of experience in project management and engineering

    • Proficient in utilizing project management software and tools

    • Strong leadership and communication skills

    • Proven track record of successfully delivering projects on time and within budget

    • Experience in coordinating with cross-functional tea...

  • Answered by AI
  • Q2. What projects you have done in previous company
  • Ans. 

    I have worked on various projects in my previous company, including the construction of a new office building and the implementation of a software system for project management.

    • Construction of a new office building

    • Implementation of a software system for project management

  • Answered by AI
  • Q3. What is lifecycle of project
  • Ans. 

    The lifecycle of a project refers to the stages it goes through from initiation to closure.

    • Initiation: project is defined and approved

    • Planning: project objectives, scope, and resources are determined

    • Execution: project plan is put into action

    • Monitoring and Control: project progress is tracked and necessary adjustments are made

    • Closure: project is completed and evaluated

    • Examples: construction of a building, development of...

  • Answered by AI
  • Q4. What are the industrial communication protocols
  • Ans. 

    Industrial communication protocols are standards for data exchange between devices in industrial automation and control systems.

    • Some common industrial communication protocols include Modbus, Profibus, DeviceNet, Ethernet/IP, and CANopen.

    • These protocols enable devices from different manufacturers to communicate with each other and exchange data.

    • Industrial communication protocols can be wired or wireless, and can operate...

  • Answered by AI
  • Q5. What are the settings required in MODBUS
  • Ans. 

    MODBUS settings include baud rate, parity, data bits, stop bits, and slave address.

    • Baud rate determines the speed of communication between devices.

    • Parity is used for error checking and can be set to even, odd, or none.

    • Data bits determine the number of bits used to represent each character.

    • Stop bits indicate the end of a character and can be set to 1 or 2.

    • Slave address is used to identify the device on the network.

    • Examp...

  • Answered by AI
  • Q6. Maximum speed in modbus
  • Ans. 

    The maximum speed in Modbus depends on the baud rate and cable length.

    • Modbus speed is measured in baud rate

    • Higher baud rates allow for faster data transfer

    • Cable length can also affect the maximum speed

    • For example, at 9600 baud rate, the maximum cable length is 1200 meters

  • Answered by AI
  • Q7. How many device add in modbus
  • Ans. 

    The number of devices that can be added in Modbus depends on the network architecture and the number of available addresses.

    • The maximum number of devices that can be added to a Modbus network is 247.

    • The number of available addresses depends on the type of Modbus protocol used (RTU or TCP/IP).

    • The network architecture also plays a role in determining the number of devices that can be added.

    • It is important to ensure that ...

  • Answered by AI
  • Q8. Types of modbus communication
  • Ans. 

    Modbus communication types include RTU, ASCII, and TCP/IP.

    • RTU (Remote Terminal Unit) is a serial communication protocol that uses binary code to transmit data.

    • ASCII (American Standard Code for Information Interchange) is a serial communication protocol that uses ASCII characters to transmit data.

    • TCP/IP (Transmission Control Protocol/Internet Protocol) is a network communication protocol that uses Ethernet to transmit d...

  • Answered by AI
  • Q9. On which scada you are worked
  • Ans. 

    I have worked on multiple SCADA systems including Wonderware, Ignition, and Inductive Automation.

    • I have experience with configuring and programming SCADA systems

    • I have worked with Wonderware, Ignition, and Inductive Automation

    • I am familiar with creating HMI screens, alarms, and trends

    • I have experience with PLC communication and data acquisition

    • I have worked on projects in various industries including manufacturing and

  • Answered by AI
  • Q10. What is maximum Input output handle
  • Ans. 

    The maximum input output handle refers to the maximum number of inputs and outputs that a device can handle.

    • The maximum input output handle varies depending on the device and its specifications.

    • It is important to consider the maximum input output handle when selecting a device for a project.

    • For example, a PLC may have a maximum input output handle of 256 inputs and 256 outputs.

    • Another example is a microcontroller with ...

  • Answered by AI
  • Q11. How many pages designed in HMI
  • Ans. 

    The number of pages designed in HMI depends on the project requirements and complexity.

    • The number of pages can range from a few to hundreds depending on the project scope.

    • The complexity of the HMI design and functionality also affects the number of pages.

    • Factors such as user interface, data visualization, and system integration can impact the number of pages.

    • It is important to prioritize user experience and ease of nav

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Currently they having vacancy for project engineer who is having experience of process automation in oil and gas field,chemical.

Skills evaluated in this interview

Project Engineer Interview Questions & Answers

ABB user image Siddharth Singh

posted on 3 Sep 2023

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
Selected Selected
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. What is the control valve and operation
  • Ans. 

    A control valve is a device used to regulate the flow of a fluid in a system by varying the size of the flow passage.

    • Control valves are commonly used in industries such as oil and gas, chemical, and power plants.

    • They can be operated manually, pneumatically, electrically, or through a combination of these methods.

    • The operation of a control valve involves adjusting the position of the valve plug or disc to control the fl...

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Salary expectations

I applied via Naukri.com and was interviewed in Apr 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. All aboutElectrical distribution

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview is purely based on electrical basics and they asked questions only from your resume please prepare your resume clearly
Contribute & help others!
anonymous
You can choose to be anonymous

TÜV SÜD Interview FAQs

How many rounds are there in TÜV SÜD Design Engineer interview?
TÜV SÜD interview process usually has 2 rounds. The most common rounds in the TÜV SÜD interview process are Aptitude Test and Technical.
How to prepare for TÜV SÜD Design Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at TÜV SÜD. The most common topics and skills that interviewers at TÜV SÜD expect are Design Engineering, Staad Pro, Static Equipment, 3D Modeling and ASME.
What are the top questions asked in TÜV SÜD Design Engineer interview?

Some of the top questions asked at the TÜV SÜD Design Engineer interview -

  1. What is stress and how it can be measur...read more
  2. What is Bernoulli princip...read more

Recently Viewed

SALARIES

Alldigi Tech

LIST OF COMPANIES

Buhler

Locations

LIST OF COMPANIES

Timken

Locations

LIST OF COMPANIES

Rieter

Locations

SALARIES

Essae Digitronics

JOBS

Alldigi Tech

No Jobs

LIST OF COMPANIES

TÜV SÜD

Locations

INTERVIEWS

Fast Track Call Taxi

No Interviews

SALARIES

Konstant Infosolutions

SALARIES

Johnson Electric

Tell us how to improve this page.

TÜV SÜD Design Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
Join TÜV SÜD Add value. Inspire trust.
TÜV SÜD Design Engineer Salary
based on 4 salaries
₹5 L/yr - ₹9 L/yr
31% more than the average Design Engineer Salary in India
View more details

TÜV SÜD Design Engineer Reviews and Ratings

based on 1 review

3.0/5

Rating in categories

2.0

Skill development

4.0

Work-life balance

3.0

Salary

4.0

Job security

4.0

Company culture

2.0

Promotions

4.0

Work satisfaction

Explore 1 Review and Rating
Senior Engineer- Design Review

Bhubaneswar

10-12 Yrs

Not Disclosed

Explore more jobs
Inspection Engineer
237 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
107 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Field Engineer
86 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Lead Auditor
84 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Analyst
82 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare TÜV SÜD with

Bureau Veritas

3.9
Compare

DNV GL

4.3
Compare

Intertek

3.8
Compare

SGS

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview