Upload Button Icon Add office photos

Filter interviews by

Técnicas Reunidas Piping Engineer Interview Questions and Answers

Updated 20 Jun 2024

Técnicas Reunidas Piping Engineer Interview Experiences

2 interviews found

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Group Discussion 

Tank area design, layout . safety distance between tanks and location and recommendations for pump station piping and layout

Interview Preparation Tips

Interview preparation tips for other job seekers - the discussion through your experience mentioned in interview
Round 1 - One-on-one 

(2 Questions)

  • Q1. Asked about work experience
  • Q2. Calm and tell what do you do.

Interview Preparation Tips

Interview preparation tips for other job seekers - Review your CV before interviews.
Keep listening interviewer
Don't interrupt in-between

Piping Engineer Interview Questions Asked at Other Companies

Q1. What is the basic difference between Pipe specification A106 Gr.A ... read more
Q2. From which size onwards NB of pipe is equal to OD of Pipe?
Q3. What is the most commonly used material for Gasket?
Q4. How can flanges be classified based on face finish?
asked in Worley
Q5. what precaution should be taken before starting any confined spac ... read more

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Apr 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. What type of Pressure Tests are conducted on valves?
  • Ans. 

    Various pressure tests are conducted on valves including hydrostatic test, pneumatic test, and cryogenic test.

    • Hydrostatic test is conducted by filling the valve with water and pressurizing it to a specified pressure to check for leaks.

    • Pneumatic test involves using air or nitrogen to pressurize the valve and check for leaks or defects.

    • Cryogenic test is performed at low temperatures to ensure the valve can withstand extr...

  • Answered by AI
  • Q2. What are some of the most important safety considerations you make when designing piping systems?
  • Ans. 

    Safety considerations in designing piping systems are crucial for preventing accidents and ensuring the integrity of the system.

    • Ensuring proper material selection to withstand the intended pressure and temperature conditions

    • Implementing proper support and restraint systems to prevent excessive stress and vibration

    • Incorporating adequate access points for maintenance and inspection

    • Following relevant codes and standards s...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Make use of networking and both online and non-online job search opportunities
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
Selected Selected
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. About Piping construction process, drawings and Quality control.
Round 3 - HR 

(1 Question)

  • Q1. About salary and when can I join
Interview experience
5
Excellent
Difficulty level
-
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Job Portal and was interviewed before Apr 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Piping code equipment layout previous project related
Round 2 - One-on-one 

(1 Question)

  • Q1. Equipment model , pump suction discharge

I applied via Recruitment Consultant and was interviewed in Feb 2020. There were 5 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. 1) About my work experience and the points updated in my cv.
  • Q2. 2) Asked me to draw pump suction and discharge and how would you extract MTO from that drawing
  • Q3. Few other questions related to the tool sp3d and pdms

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident while answering sometimes your confidence shows more then the correct answers
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. How many type gaskets
  • Ans. 

    There are several types of gaskets used in piping, including spiral wound, ring joint, and sheet gaskets.

    • Spiral wound gaskets are commonly used for high pressure and temperature applications.

    • Ring joint gaskets are used in high pressure and high temperature applications, typically in oil and gas industries.

    • Sheet gaskets are versatile and come in various materials such as rubber, cork, and graphite.

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected
Round 1 - Technical 

(3 Questions)

  • Q1. Explain the suction piping of pump?
  • Ans. 

    Suction piping of a pump is the piping system that brings fluid into the pump from the source.

    • Suction piping is designed to ensure a smooth flow of fluid into the pump without any air pockets or cavitation.

    • The piping should be sized appropriately to prevent excessive pressure drop and maintain efficient pump operation.

    • Proper alignment and support of the piping is crucial to prevent stress on the pump and ensure longevi...

  • Answered by AI
  • Q2. Why we used eccentric reducer in suction line with flat side up/
  • Ans. 

    Eccentric reducers are used in suction lines with flat side up to prevent air pockets and improve flow efficiency.

    • Eccentric reducers help in preventing air pockets from forming in the suction line

    • Having the flat side up ensures that any trapped air can easily escape

    • Improves flow efficiency by reducing turbulence and pressure drop

    • Commonly used in applications where smooth flow is critical, such as pump suction lines

  • Answered by AI
  • Q3. What is figure 8?
  • Ans. 

    Figure 8 is a type of knot commonly used in piping design to secure two ropes or cables together.

    • Figure 8 knot is also known as a stopper knot due to its ability to prevent ropes from slipping through holes or other openings.

    • It is easy to tie and untie, making it a popular choice for various applications in piping design.

    • The figure 8 knot is often used in rock climbing, sailing, and rescue operations for its reliabilit

  • Answered by AI
Round 2 - tool test 

(2 Questions)

  • Q1. Piping of control station
  • Ans. 

    Control station piping is essential for regulating and monitoring the flow of fluids in a system.

    • Control station piping connects various components such as valves, instruments, and equipment to control the flow of fluids.

    • Proper design of control station piping ensures efficient operation and safety of the system.

    • Consider factors like pressure, temperature, and material compatibility when designing control station pipin...

  • Answered by AI
  • Q2. Suction piping of pump
  • Ans. 

    Suction piping of pump is crucial for efficient operation and performance.

    • Suction piping should be designed to minimize friction losses and ensure proper flow to the pump.

    • Proper sizing and layout of suction piping is essential to prevent cavitation and maintain pump efficiency.

    • Consider factors such as pipe diameter, length, bends, and fittings when designing suction piping.

    • Use smooth bore pipes, avoid sharp bends, and ...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Nov 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Normally, asking my previous work
Round 2 - HR 

(1 Question)

  • Q1. Salary Discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Company is very good, Friendly environment and also seniors are very good
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Written test regarding symbols
Round 3 - Technical 

(1 Question)

  • Q1. Hr salary negotiation

Técnicas Reunidas Interview FAQs

How many rounds are there in Técnicas Reunidas Piping Engineer interview?
Técnicas Reunidas interview process usually has 1 rounds. The most common rounds in the Técnicas Reunidas interview process are One-on-one Round and Group Discussion.

Tell us how to improve this page.

Técnicas Reunidas Piping Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
Técnicas Reunidas Piping Engineer Salary
based on 4 salaries
₹5.6 L/yr - ₹20.2 L/yr
57% more than the average Piping Engineer Salary in India
View more details
Piping Designer
43 salaries
unlock blur

₹5 L/yr - ₹16.5 L/yr

Process Engineer
35 salaries
unlock blur

₹5.5 L/yr - ₹20 L/yr

Instrument Engineer
29 salaries
unlock blur

₹6.8 L/yr - ₹18 L/yr

Process Designer
19 salaries
unlock blur

₹7.5 L/yr - ₹15.7 L/yr

Quantity Surveyor
16 salaries
unlock blur

₹6 L/yr - ₹14.8 L/yr

Explore more salaries
Compare Técnicas Reunidas with

Larsen & Toubro Limited

4.0
Compare

Punj Lloyd

4.3
Compare

Thermax Limited

4.1
Compare

BHEL

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview