Filter interviews by
I applied via Campus Placement and was interviewed before Jun 2022. There were 3 interview rounds.
A bourdon type pressure gauge is a mechanical device used to measure pressure in a system.
Consists of a curved tube that straightens with pressure, causing a pointer to move on a dial
Commonly used in industrial applications for measuring pressure in pipelines, tanks, and machinery
Available in various designs such as C-type, spiral, and helical bourdon tubes
The liquid filled in pressure gauge is typically glycerin or silicone oil.
Common liquids used are glycerin and silicone oil
The liquid helps dampen the effects of vibration and pulsation on the gauge
It also helps lubricate the internal components of the gauge
The choice of liquid depends on the application and operating conditions
Nucleonic type radar level transmitter uses radioactive sources to measure level of liquids or solids in tanks. It is commonly used in industries like oil and gas, chemical, and power plants.
Uses radioactive sources to emit gamma rays towards the material being measured
The gamma rays are then reflected back to the detector, with the time taken for the reflection used to calculate the level of the material
Suitable for m...
Final control elements are classified based on their action, type of motion, and type of signal.
Based on action: On-off control, proportional control, PID control
Based on type of motion: Linear motion, rotary motion
Based on type of signal: Pneumatic, hydraulic, electric
Examples: Control valves, actuators, solenoid valves
A solenoid valve is an electromechanically operated valve that is commonly used to control the flow of liquids or gases.
Solenoid valves use an electromagnetic coil to open or close the valve mechanism.
They are commonly used in applications such as controlling water flow in irrigation systems, gas flow in HVAC systems, and fluid control in industrial processes.
When the coil is energized, it creates a magnetic field that...
Float type level measurement works by using a float that rises or falls with the liquid level, activating a switch or transmitter.
Float rises or falls with the liquid level
Float activates a switch or transmitter
Commonly used in tanks and vessels for level control
Examples: magnetic float level switch, displacer level transmitter
Units of pressure include psi, bar, atm, mmHg, and Pa.
PSI (pounds per square inch) is commonly used in the United States
Bar is a metric unit of pressure equal to 100 kilopascals
Atmosphere (atm) is the pressure exerted by the weight of the Earth's atmosphere
Millimeters of mercury (mmHg) is commonly used in measuring blood pressure
Pascal (Pa) is the SI unit of pressure
Transducers can be classified based on various criteria such as principle of operation, electrical output, and application.
Classification based on principle of operation: resistive, capacitive, inductive, piezoelectric
Classification based on electrical output: analog, digital
Classification based on application: temperature, pressure, level, flow
Other classifications: active vs. passive, contact vs. non-contact
Designing tools and drawings required for setting up a chemical plant include P&IDs, PFDs, equipment layouts, and instrumentation diagrams.
Process and Instrumentation Diagrams (P&IDs) are essential for showing the interconnection of process equipment and the instrumentation used to control the process.
Piping and Instrumentation Diagrams (P&IDs) show the piping of the process flow together with the installed equipment a...
I applied via Campus Placement
It was a technicaL + aptitude test with 60 minutes duration.
I appeared for an interview before Feb 2024.
All basic questions of chemical engineering
I appeared for an interview in Dec 2024.
It is easy for both aptitude and core subjects.
TCE interview questions for popular designations
I applied via Approached by Company and was interviewed in Jul 2024. There was 1 interview round.
To increase terminal residual pressure in a pipe, you can adjust the pump speed, increase the pipe diameter, or reduce the pipe length.
Adjust the pump speed to increase the pressure in the pipe.
Increase the pipe diameter to reduce friction losses and increase pressure.
Reduce the pipe length to minimize pressure drop along the pipe.
Check for any leaks or blockages in the pipe that may be causing pressure loss.
Concrete grades are classifications that indicate the strength of the concrete mix used in construction projects.
Concrete grades are classified based on their compressive strength, measured in megapascals (MPa).
Common concrete grades include C10, C15, C20, C25, C30, C35, C40, C45, C50, and C60.
Higher grade concrete mixes are used for projects that require stronger and more durable structures.
The specific grade of concr...
I am experienced in designing water supply networks using software such as EPANET, WaterCAD, and Bentley WaterGEMS.
EPANET
WaterCAD
Bentley WaterGEMS
Get interview-ready with Top TCE Interview Questions
I appeared for an interview in Jul 2024.
Safety management involves implementing policies, procedures, and practices to ensure a safe work environment.
Safety management includes risk assessments to identify hazards and implement controls.
Regular safety training and communication are essential for promoting a safety culture.
Incident reporting and investigation help in identifying root causes and implementing corrective actions.
Safety audits and inspections are...
Leading and lagging are terms used in project management to describe the relationship between two activities.
Leading refers to an activity that must be completed before another activity can start.
Lagging refers to an activity that is delayed or starts after another activity has already begun.
Leading activities help in speeding up the project schedule, while lagging activities help in delaying the project schedule.
For e...
I applied via Campus Placement and was interviewed in Dec 2024. There were 3 interview rounds.
Quantitative reasoning andtranducer English.
I applied via Campus Placement and was interviewed in Jul 2024. There was 1 interview round.
Various code books used in civil engineering include ACI 318, AISC Steel Construction Manual, and ASCE 7.
ACI 318 - American Concrete Institute's Building Code Requirements for Structural Concrete
AISC Steel Construction Manual - American Institute of Steel Construction's manual for designing steel structures
ASCE 7 - American Society of Civil Engineers' Minimum Design Loads for Buildings and Other Structures
I applied via Campus Placement and was interviewed in Jul 2024. There were 3 interview rounds.
Basic technical knowledge and aptitude
My favourite subject is Mechanical Engineering because I enjoy learning about the principles of mechanics and how machines work.
I enjoy studying topics like thermodynamics, fluid mechanics, and materials science.
I like working on hands-on projects like designing and building machines or structures.
I find the problem-solving aspect of Mechanical Engineering to be challenging and rewarding.
TCE focuses on core engineering principles while IT focuses on information technology.
TCE involves designing, building, and maintaining physical structures and systems.
IT involves managing and utilizing technology for information processing and communication.
TCE requires knowledge of mechanics, materials, and construction techniques.
IT requires knowledge of programming, networking, and software development.
Examples: Ci...
I believe gaining practical experience in a professional setting will enhance my skills more effectively than further education.
I value hands-on experience and believe it is more beneficial for my career growth
I want to apply the knowledge I have gained in a real-world setting
I prefer to learn through practical application rather than theoretical study
Company is a leading software development firm specializing in creating innovative solutions for various industries.
Specializes in creating innovative software solutions
Works with clients from various industries
Known for high-quality and reliable products
The duration of TCE interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 201 interviews
Interview experience
Assistant Manager
483
salaries
| ₹4.5 L/yr - ₹13 L/yr |
Manager
352
salaries
| ₹6.1 L/yr - ₹17 L/yr |
Senior Engineer
334
salaries
| ₹4 L/yr - ₹10 L/yr |
Senior Manager
304
salaries
| ₹10 L/yr - ₹22.5 L/yr |
Consultant
259
salaries
| ₹3.8 L/yr - ₹13.4 L/yr |
Tata Projects
Shapoorji Pallonji Group
Kalpataru Projects International
Nagarjuna Construction Company