Tata Steel Utilities and Infrastructure Services Graduate Engineer Trainee (Get) Interview Questions and Answers

Q1. How do you calculate the transmission energy loss in the vehicle?
Ans. 
Transmission energy loss in a vehicle can be calculated by considering factors like friction, heat generation, and mechanical inefficiencies.
• Calculate energy loss due to friction between moving parts

• Consider heat generation from components like the transmission fluid

• Account for mechanical inefficiencies in the transmission system

• Total the energy losses to get an overall estimate
Answered by AI
Add your answer

Q1. About yourself?
Add your answer

One civil topic given to talk

Q1. 1.What are pumps 2.What are flow meters. How their working vary? On increasing the value of Reflux ratio in distillation column what happens? What are the modes of heat transfer?
Ans. 
Questions related to pumps, flow meters, distillation column, and heat transfer modes.
• Pumps are devices used to move fluids by mechanical action.

• Flow meters are instruments used to measure the flow rate of fluids.

• The working of flow meters varies depending on the type of flow meter used.

• Increasing the reflux ratio in a distillation column increases the purity of the distillate.

• The modes of heat transfer are conduction,
Answered by AI
View 1 more answer
Q2. What is distillation?
Ans. 
Distillation is a process of separating components of a mixture based on their boiling points.
• It involves heating the mixture to vaporize the component with the lowest boiling point.

• The vapor is then condensed and collected as a separate liquid.

• This process can be used to purify liquids, separate different components of a mixture, and extract essential oils from plants.

• Examples include the distillation of crude oil to ...read more
Answered by AI
Add your answer
Q3. What are various types of flow meters
Ans. 
Flow meters are devices used to measure the flow rate or quantity of a gas or liquid moving through a pipe.
• Differential pressure flow meters

• Positive displacement flow meters

• Velocity flow meters

• Mass flow meters

• Open channel flow meters
Answered by AI
Add your answer
Q4. Working of flow meters
Ans. 
Flow meters measure the rate of fluid flow in a pipe or channel.
• Flow meters work by measuring the velocity of the fluid and the cross-sectional area of the pipe or channel.

• There are different types of flow meters such as differential pressure flow meters, positive displacement flow meters, and electromagnetic flow meters.

• Flow meters are used in various industries such as oil and gas, water treatment, and food and bever...read more
Answered by AI
Add your answer
Q5. What is heat exchanger and it's working?
Ans. 
A heat exchanger is a device used to transfer heat between two or more fluids.
• Heat exchangers are used in various industries such as chemical, power, and HVAC.

• They work by allowing two fluids to flow through separate channels, with heat transferring from one fluid to the other.

• Common types of heat exchangers include shell and tube, plate and frame, and finned tube.

• Heat exchangers can be used for heating, cooling, or bo...read more
Answered by AI
Add your answer

Q1. Objective Questions asked based on the civil domain
Add your answer

Q1. Question from cv
Add your answer
Q2. Calculate weight of steel plate, dimension given
Ans. 
Calculate weight of steel plate based on given dimensions
• Calculate the volume of the steel plate using the given dimensions

• Use the density of steel (usually around 7850 kg/m^3) to calculate the weight

• Weight = Volume x Density
Answered by AI
Add your answer

Q1. Designing of beams, steel designing
Add your answer
Q2. SFD BMD AND ENVIRONMENT ENGINEERING
Add your answer

Q1. About intership, LIKE HOW U TACKLE WITH UNEDUCATED WORKFORCE
Add your answer
Q2. GRADES IS LOWER.. LIKE UR GRADES ARE LOWERING DAY BY DAY
Add your answer

Q1. Draw BMD & SFD of a Simply Supported Beam shown to my screen. Draw it & show that on screen.
Ans. 
The candidate is asked to draw the BMD & SFD of a Simply Supported Beam shown on the screen.
• Identify the support conditions of the beam (simply supported in this case)

• Determine the loads acting on the beam and their positions

• Calculate the reactions at the supports

• Draw the Bending Moment Diagram (BMD) and Shear Force Diagram (SFD) based on the calculated values

• Label the diagrams with appropriate values and units
Answered by AI
Add your answer
Q2. What are the values of Compressive & Tensile Shear Stress on a Singly Reinforced Beam in LSM method?
Ans. 
Compressive shear stress is zero while tensile shear stress is equal to the shear force divided by the cross-sectional area of the beam.
• Compressive shear stress is zero in a singly reinforced beam according to the Limit State Method (LSM).

• Tensile shear stress is calculated by dividing the shear force by the cross-sectional area of the beam.

• For example, if the shear force acting on the beam is 10 kN and the cross-sectio...read more
Answered by AI
Add your answer
Q3. Some other civil engineering questions.
Add your answer
Q4. Introduce Yourself. This is 1st Question.
Add your answer

Very Easy general aptitude questions are asked in a MCQ pattern

Q1. Should we continue concreting of foundation the next day, if there is one day of continuous rainfall?
Ans. 
No, it is not advisable to continue concreting of foundation the next day after one day of continuous rainfall.
• Continuous rainfall can saturate the soil, making it unstable for concreting.

• Rainwater can mix with the concrete, affecting its strength and durability.

• The presence of water can lead to the formation of voids and cracks in the foundation.

• It is important to ensure that the foundation is dry and stable before pr...read more
Answered by AI
View 1 more answer

Q1. Are you open to work over pan India?
Add your answer