Tata Steel Assistant Technician Interview Questions and Answers

An overload relay works by monitoring the current flowing through a motor and tripping when the current exceeds a set limit.

• Monitors the current flowing through a motor

• Trips and interrupts power when current exceeds a set limit

• Protects the motor from damage due to overloading

• Can be reset manually after tripping

Insulation resistance is measured using a megohmmeter to apply a high voltage and measure the resistance of the insulation material.

• Use a megohmmeter to apply a high voltage to the insulation material

• Measure the resistance of the insulation material to determine its insulation resistance

• Insulation resistance is typically measured in megaohms (MΩ)

• Regular insulation resistance testing helps prevent electrical failures an

Electrical safety can be ensured by following proper procedures, using appropriate equipment, and staying vigilant.

• Always use insulated tools when working on live circuits

• Ensure circuits are de-energized before working on them

• Wear appropriate personal protective equipment (PPE) such as gloves and goggles

• Regularly inspect and maintain electrical equipment to prevent malfunctions

• Follow safety guidelines and procedures ou

Preventive maintenance on a motor involves inspecting, cleaning, lubricating, and testing the motor to ensure optimal performance and prevent breakdowns.

• Inspect the motor for any signs of wear or damage

• Clean the motor and its components to remove dirt and debris

• Lubricate moving parts to reduce friction and wear

• Test the motor's performance using appropriate tools and equipment

• Replace any worn out parts or components as

To succeed in an interview, it is important to prepare thoroughly, practice common interview questions, research the company, dress professionally, and demonstrate enthusiasm and confidence.

• Thoroughly research the company and the position you are applying for

• Practice common interview questions and prepare examples of your skills and experiences

• Dress professionally and appropriately for the interview

• Demonstrate enthusia...read more

A star-delta starter is used to reduce the starting current of a motor by initially connecting the motor windings in a star configuration and then switching to a delta configuration.

• The motor windings are initially connected in a star configuration during starting to reduce the starting current.

• After a certain period, the windings are switched to a delta configuration to achieve full speed and torque.

• This transition fr...read more

Undervoltage faults occur when the voltage in a system drops below the normal operating level, leading to potential equipment damage or malfunction.

• Undervoltage faults can be caused by issues such as power supply fluctuations, equipment failures, or overloaded circuits.

• These faults can lead to equipment damage, reduced efficiency, or complete shutdown of systems.

• Examples include a power surge causing a drop in voltage,...read more

Overvoltage faults are electrical faults that occur when the voltage in a circuit exceeds the normal operating range.

• Overvoltage faults can damage electrical components and equipment.

• They can be caused by lightning strikes, power surges, or faulty equipment.

• Protective devices like surge protectors and voltage regulators can help prevent overvoltage faults.

• Examples include a power surge from a lightning strike damaging ...read more

A thermal relay is used to protect electrical circuits from overloads by monitoring the temperature of the circuit and tripping when it exceeds a certain threshold.

• Monitors the temperature of the electrical circuit

• Trips and disconnects the circuit when temperature exceeds a set limit

• Protects against overloads and overheating

• Commonly used in motor protection applications

An RDOL starter is a type of reduced voltage starter used in electrical systems to reduce the starting current and torque of a motor.

• RDOL stands for Reduced Direct Online starter.

• It is used to start induction motors in a controlled manner.

• RDOL starters reduce the voltage supplied to the motor during starting to limit the inrush current.

• This helps in reducing mechanical stress on the motor and connected equipment.

• Common...read more

Electrician project work involves installation, maintenance, and repair of electrical systems.

• Electricians install and wire electrical systems in residential, commercial, and industrial buildings.

• They troubleshoot and repair electrical faults and malfunctions.

• They perform regular maintenance and inspections to ensure safety and compliance.

• Electricians may work on projects such as wiring new buildings, upgrading electri...read more

Cable laying work involves the installation of cables for various purposes.

• Cable laying work is done to establish connections for electricity, telecommunications, or data transmission.

• It involves the process of laying cables underground, underwater, or overhead.

• Cable laying technicians use specialized equipment and tools to ensure proper installation and maintenance.

• Examples of cable laying work include laying fiber op...read more

The inner diameter of ball bearing 1212 is 12 mm.

• The inner diameter of ball bearing 1212 is a measurement of the distance across the center of the bearing's inner ring.

• It is typically expressed in millimeters (mm).

• In the case of ball bearing 1212, the inner diameter is 12 mm.

The bearing used in an ID fan is typically a ball bearing.

• ID fans in industrial applications often use ball bearings for their high load capacity and durability.

• Ball bearings are designed to handle radial and axial loads, making them suitable for the rotating shaft of an ID fan.

• Other types of bearings, such as roller bearings or sleeve bearings, may also be used depending on the specific requirements of the ID fan.

The clearance of a bearing in diameter can be measured using a micrometer or a dial gauge.

• Use a micrometer or a dial gauge to measure the diameter of the bearing.

• Measure the diameter at multiple points around the bearing to ensure accuracy.

• Subtract the measured diameter from the specified or nominal diameter to calculate the clearance.

• Clearance can be positive (when the measured diameter is smaller than the specified d...read more