Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by JSW Steel Team. If you also belong to the team, you can get access from here

JSW Steel Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

JSW Steel Technician Interview Questions, Process, and Tips

Updated 9 Dec 2022

Top JSW Steel Technician Interview Questions and Answers

JSW Steel Technician Interview Experiences

3 interviews found

Technician Interview Questions & Answers

user image Anonymous

posted on 7 Jul 2022

I appeared for an interview in Jun 2022.

Round 1 - Technical 

(3 Questions)

  • Q1. What is the inner diameter of ball bearing 1212
  • Ans. 

    The inner diameter of ball bearing 1212 is 12 mm.

    • The inner diameter of ball bearing 1212 is a measurement of the distance across the center of the bearing's inner ring.

    • It is typically expressed in millimeters (mm).

    • In the case of ball bearing 1212, the inner diameter is 12 mm.

  • Answered by AI
  • Q2. Which bearing uses in I'd fan?
  • Ans. 

    The bearing used in an ID fan is typically a ball bearing.

    • ID fans in industrial applications often use ball bearings for their high load capacity and durability.

    • Ball bearings are designed to handle radial and axial loads, making them suitable for the rotating shaft of an ID fan.

    • Other types of bearings, such as roller bearings or sleeve bearings, may also be used depending on the specific requirements of the ID fan.

  • Answered by AI
  • Q3. How to measure clearance of bearing in dia?
  • Ans. 

    The clearance of a bearing in diameter can be measured using a micrometer or a dial gauge.

    • Use a micrometer or a dial gauge to measure the diameter of the bearing.

    • Measure the diameter at multiple points around the bearing to ensure accuracy.

    • Subtract the measured diameter from the specified or nominal diameter to calculate the clearance.

    • Clearance can be positive (when the measured diameter is smaller than the specified d...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I want to mechanical technicians job for my future and life to be secure .

Technician Interview Questions & Answers

user image Anonymous

posted on 28 Nov 2022

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Types of gearbot and their parts
  • Ans. 

    Gearbots are machines that use gears to transmit power and motion. There are various types of gearbots with different parts.

    • Types of gearbots include spur gear, helical gear, bevel gear, worm gear, and planetary gear.

    • Parts of gearbots include gears, shafts, bearings, housings, and lubricants.

    • Spur gears are the most common type and have straight teeth that mesh together.

    • Helical gears have angled teeth that create a smoo...

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. As per your experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Confidently give your answer. Hajsjjs
@jsw steel plant @

Technician Interview Questions Asked at Other Companies

Q1. What kinds of pipe used for hot and cold water supply ?
asked in Tata Motors
Q2. what would you do to reduce the risk of Global Warming posed by u ... read more
Q3. How you will find a fault in AC?
Q4. What is sefty eot crane used
Q5. What you will do if the fault comes in fixed pipe in wall?

Technician Interview Questions & Answers

user image Anonymous

posted on 19 Jul 2021

Interview Questionnaire 

5 Questions

  • Q1. 30 hp ki motar kina current legi
  • Q2. 3 phase ko ek shath mila de to kya hoga
  • Q3. Kw or kva me kya antar hai
  • Q4. Mccb or mcb me kya antar hai
  • Q5. Transformer ke output me input supply ko jod diya jaye to kya hoga

Interview questions from similar companies

I applied via Campus Placement and was interviewed before Sep 2021. There were 2 interview rounds.

Round 1 - Aptitude Test 

G.k,maths,english helth, wait, hight

Round 2 - Technical 

(2 Questions)

  • Q1. 1 . What is electrolysis prowess? 2.all about 3ph DOL starter 3.transfor working principal.etc
  • Q2. About tharmocouple,transformer,motor ,electrical waiting diagram

Interview Preparation Tips

Interview preparation tips for other job seekers - If you trying to start a new job in a private company,, please read and understand all kind company policy and negotiate about in hand salary then after you will join the company.

Thanks

I applied via Job Portal and was interviewed before Nov 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Direct through campus placement and group discussion.

Round 3 - Technical 

(2 Questions)

  • Q1. All the studies related concepts were aksed
  • Q2. About COST ACCOUNTING STANDARDS

Interview Preparation Tips

Interview preparation tips for other job seekers - Clear all your attempts of CMA in one go and prepare all the concepts before interview
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Apr 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(4 Questions)

  • Q1. File is made of
  • Q2. Steel rule is a made of
  • Q3. The point angle of scriber is
  • Ans. 

    The point angle of scriber is the angle between the two cutting edges of the scriber.

    • The point angle is typically between 30 and 60 degrees.

    • It affects the sharpness and durability of the scriber.

    • A larger point angle will result in a stronger but less sharp scriber.

    • A smaller point angle will result in a sharper but less durable scriber.

  • Answered by AI
  • Q4. The point angle of centre punch
  • Ans. 

    The point angle of a centre punch is typically 90 degrees.

    • The point angle is the angle between the two sides of the punch tip.

    • A 90 degree point angle is the most common and versatile for general use.

    • Different point angles can be used for specific applications, such as 60 degrees for softer materials.

    • The point angle affects the size and shape of the indentation made by the punch.

  • Answered by AI
Interview experience
3
Average
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview in Jan 2023.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(3 Questions)

  • Q1. Bearing fittings Gearbox assembly
  • Q2. Job requirment all equipment check
  • Q3. So damage part ready prayority damage part change

Interview Preparation Tips

Interview preparation tips for other job seekers - Maintenance any ccs machine all check equipment
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Apr 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - HR 

(1 Question)

  • Q1. Four Questions in WCTL line
Round 3 - HR 

(1 Question)

  • Q1. WCTL line question
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jan 2024. There was 1 interview round.

Round 1 - Technical 

(6 Questions)

  • Q1. Elactrician project work
  • Ans. 

    Electrician project work involves installation, maintenance, and repair of electrical systems.

    • Electricians install and wire electrical systems in residential, commercial, and industrial buildings.

    • They troubleshoot and repair electrical faults and malfunctions.

    • They perform regular maintenance and inspections to ensure safety and compliance.

    • Electricians may work on projects such as wiring new buildings, upgrading electri...

  • Answered by AI
  • Q2. Control cable conaction
  • Q3. Lt cable conection
  • Q4. Cable laying work
  • Ans. 

    Cable laying work involves the installation of cables for various purposes.

    • Cable laying work is done to establish connections for electricity, telecommunications, or data transmission.

    • It involves the process of laying cables underground, underwater, or overhead.

    • Cable laying technicians use specialized equipment and tools to ensure proper installation and maintenance.

    • Examples of cable laying work include laying fiber op...

  • Answered by AI
  • Q5. It cable laying
  • Q6. Elactrical costions
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Apr 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Job related and experience
  • Q2. Job and working

Interview Preparation Tips

Interview preparation tips for other job seekers - Hard working
Contribute & help others!
anonymous
You can choose to be anonymous

JSW Steel Interview FAQs

How many rounds are there in JSW Steel Technician interview?
JSW Steel interview process usually has 2 rounds. The most common rounds in the JSW Steel interview process are Technical and Resume Shortlist.
How to prepare for JSW Steel Technician interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at JSW Steel. The most common topics and skills that interviewers at JSW Steel expect are Electrical Engineering, Cement Plant, Electrical Maintenance, Energy Management and Instrumentation.
What are the top questions asked in JSW Steel Technician interview?

Some of the top questions asked at the JSW Steel Technician interview -

  1. What is the inner diameter of ball bearing 1...read more
  2. How to measure clearance of bearing in d...read more
  3. Which bearing uses in I'd f...read more

Recently Viewed

REVIEWS

Tata Motors

No Reviews

INTERVIEWS

Mycom OSI

No Interviews

SALARIES

Trinity College Dublin

REVIEWS

Trinity College Dublin

No Reviews

SALARIES

Trinity College Dublin

No Salaries

INTERVIEWS

Sanyukt Infra

No Interviews

INTERVIEWS

Mycom OSI

No Interviews

INTERVIEWS

TCL

No Interviews

LIST OF COMPANIES

Trinity College Dublin

Overview

Tell us how to improve this page.

JSW Steel Technician Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
JSW Steel Technician Salary
based on 140 salaries
₹0.9 L/yr - ₹4.5 L/yr
7% less than the average Technician Salary in India
View more details

JSW Steel Technician Reviews and Ratings

based on 28 reviews

4.3/5

Rating in categories

3.5

Skill development

4.0

Work-life balance

3.4

Salary

3.5

Job security

3.6

Company culture

3.1

Promotions

3.7

Work satisfaction

Explore 28 Reviews and Ratings
Assistant Manager
3.1k salaries
unlock blur

₹3.6 L/yr - ₹12.9 L/yr

Junior Engineer
2.2k salaries
unlock blur

₹2 L/yr - ₹5.5 L/yr

Deputy Manager
1.7k salaries
unlock blur

₹5.6 L/yr - ₹20 L/yr

Manager
1.1k salaries
unlock blur

₹7 L/yr - ₹22.5 L/yr

Senior Engineer
990 salaries
unlock blur

₹3 L/yr - ₹10.8 L/yr

Explore more salaries
Compare JSW Steel with

Tata Steel

4.1
Compare

Steel Authority Of India

4.1
Compare

Vedanta Limited

3.8
Compare

ArcelorMittal Nippon Steel

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent