Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Enova Facilities Management LLC Technician Interview Questions, Process, and Tips

Updated 9 Mar 2022

Enova Facilities Management LLC Technician Interview Experiences

1 interview found

Technician Interview Questions & Answers

user image Anonymous

posted on 9 Mar 2022

I applied via Google alert and was interviewed in Feb 2022. There were 4 interview rounds.

Round 1 - Technical 

(10 Questions)

  • Q1. How you will find a fault in AC?
  • Ans. 

    To find a fault in an AC, you can follow these steps:

    • Check if the AC is receiving power and if the circuit breaker is tripped

    • Inspect the thermostat settings and ensure they are properly set

    • Examine the air filter and clean or replace it if necessary

    • Inspect the condenser unit for any visible damage or debris

    • Check the refrigerant levels and ensure they are within the recommended range

    • Inspect the electrical connections and...

  • Answered by AI
  • Q2. What is CSR and how you will find of AC?
  • Ans. 

    CSR stands for Customer Service Representative. AC refers to Air Conditioning.

    • CSR is a role in customer service where representatives assist customers with their inquiries, complaints, and requests.

    • AC refers to the system that provides cooling and ventilation in buildings or vehicles.

    • To find out about AC, one can refer to the user manual, consult an expert technician, or search online for troubleshooting guides.

    • CSR and...

  • Answered by AI
  • Q3. What is the duration of vaccume pressure in AC?
  • Ans. 

    The duration of vacuum pressure in an AC system varies depending on the specific circumstances.

    • The duration of vacuum pressure in an AC system is typically determined by the evacuation process.

    • During installation or repair, the vacuum pump is used to remove air and moisture from the system.

    • The duration can range from a few minutes to several hours, depending on the size and complexity of the AC system.

    • Once the desired ...

  • Answered by AI
  • Q4. What kinds of pipe used for hot and cold water supply ?
  • Ans. 

    Different types of pipes are used for hot and cold water supply.

    • Copper pipes are commonly used for both hot and cold water supply.

    • PEX (cross-linked polyethylene) pipes are also used for hot and cold water supply.

    • CPVC (chlorinated polyvinyl chloride) pipes are suitable for hot and cold water supply.

    • Galvanized steel pipes were used in the past but are less common now due to corrosion issues.

    • PVC (polyvinyl chloride) pipes

  • Answered by AI
  • Q5. What you will do if the fault comes in fixed pipe in wall?
  • Ans. 

    If a fault comes in a fixed pipe in the wall, I would follow a systematic approach to address the issue.

    • Assess the extent of the fault and identify the cause

    • Turn off the water supply to prevent further damage

    • Determine if the fault can be repaired or if the pipe needs to be replaced

    • If repairable, use appropriate tools and materials to fix the fault

    • Test the repaired pipe for leaks and ensure proper functionality

    • If replac...

  • Answered by AI
  • Q6. Where you use the flow trip in building?
  • Ans. 

    Flow trips are used in building to control the flow of fluids or gases.

    • Flow trips are commonly used in plumbing systems to prevent backflow of water.

    • They are also used in HVAC systems to regulate the flow of air.

    • Flow trips can be found in industrial processes to control the movement of liquids or gases.

    • In fire protection systems, flow trips are used to detect the presence of water and activate alarms or sprinklers.

    • Flow...

  • Answered by AI
  • Q7. Which elbow is commonly use for drain the water ?
  • Ans. 

    The commonly used elbow for draining water is the P-trap elbow.

    • The P-trap elbow is commonly used for draining water in plumbing systems.

    • It is named after its shape, which resembles the letter 'P'.

    • The P-trap elbow is designed to prevent sewer gases from entering the building.

    • It is typically used in sinks, showers, and other plumbing fixtures.

    • Other types of elbows, such as 90-degree elbows, may also be used depending on

  • Answered by AI
  • Q8. What is wall putty and where the wall putty is used?
  • Ans. 

    Wall putty is a white cement-based powder used for smoothening and leveling the surface of walls before painting.

    • Wall putty is a type of filler material used to fill cracks, holes, and imperfections on walls.

    • It is applied on the surface of walls to create a smooth and even base for painting.

    • Wall putty helps in improving the durability and finish of paint.

    • It is commonly used in both interior and exterior walls of buildi...

  • Answered by AI
  • Q9. What is name of equipments use in painting work?
  • Ans. 

    Some common equipment used in painting work include paintbrushes, rollers, sprayers, drop cloths, and paint trays.

    • Paintbrushes are used to apply paint to surfaces.

    • Rollers are used to quickly cover large areas with paint.

    • Sprayers are used for applying paint evenly and smoothly.

    • Drop cloths are used to protect floors and furniture from paint splatters.

    • Paint trays are used to hold and distribute paint during the painting p

  • Answered by AI
  • Q10. Where are you use the "Y" shape plumbing fixture?
  • Ans. 

    The 'Y' shape plumbing fixture is used to connect three pipes together at a 45-degree angle.

    • It is commonly used in plumbing systems to divert or combine the flow of water or other fluids.

    • The 'Y' shape allows for smooth flow and minimal pressure drop.

    • Examples include connecting a sink drain pipe to a main sewer line or connecting multiple pipes in a drainage system.

  • Answered by AI
Round 2 - HR 

(3 Questions)

  • Q1. Tell me about yourself.
  • Ans. 

    I am a skilled technician with experience in troubleshooting and repairing various electronic devices.

    • Skilled technician with expertise in troubleshooting and repairing electronic devices

    • Proficient in diagnosing and resolving hardware and software issues

    • Experienced in conducting routine maintenance and upgrades

    • Knowledgeable in using diagnostic tools and software

    • Strong problem-solving and communication skills

    • Ability to

  • Answered by AI
  • Q2. What is your strength and weakness?
  • Ans. 

    My strength is my attention to detail and my weakness is my tendency to overthink.

    • Strength: Attention to detail

    • Weakness: Overthinking

    • Strength: Ability to troubleshoot and problem solve

    • Weakness: Public speaking

    • Strength: Strong technical knowledge

    • Weakness: Time management

  • Answered by AI
  • Q3. What is your salary expectation?
  • Ans. 

    I would expect a salary that is competitive for the Technician role based on my experience and qualifications.

    • I would like to discuss the salary range for this position.

    • I am open to negotiation and would consider the overall compensation package.

    • Based on my research, the average salary for Technicians in this industry is around $X per year.

    • I believe my skills and experience justify a fair and competitive salary.

  • Answered by AI
Round 3 - Group Discussion 

Good morning everyone
My name is haji gul today i want to gave you some safety instructions.
Do not start your work untill you don't wear a safety shoes.
If the need of helmat is happen then first wear a helmat.
Do not touch electric wire first you should off the power then work on it .
Wear a mask when you working in place where dust is comming like cutting some thing.

Round 4 - Coding Test 

I am haji gul i completed my 3 years diploma in civil engineering in 2013 i had been successfully completed a small dam project in pakistan with earth engineering limited.the purpose of that project is to facilitate the vallage of orakzai pakistan for electricity and the dam is also used for irrigation purposes as well.
So there we install the electric poll and as well dynamo with dynamic machine used for electricity. i also lead the team of plumbing as well.

Interview Preparation Tips

Topics to prepare for Enova Facilities Management LLC Technician interview:
  • mechanical electrical plumbing
Interview preparation tips for other job seekers - Work hard to acquire your goal as well as make some new changes

Interview questions from similar companies

Interview Questionnaire 

1 Question

  • Q1. What's BTU METER
  • Ans. 

    BTU meter is a device used to measure the heat energy in a fluid flow.

    • BTU stands for British Thermal Unit

    • It measures the amount of heat energy transferred from one medium to another

    • It is commonly used in HVAC systems to measure the heating or cooling output

    • It consists of a flow sensor and temperature sensors to calculate the heat energy

    • Examples of applications include measuring the energy consumption of a building's he

  • Answered by AI
Round 1 - Technical 

(2 Questions)

  • Q1. Process of Chillers operation?
  • Ans. 

    Chillers operate by removing heat from a liquid through a refrigeration cycle.

    • Chillers use a compressor to compress refrigerant gas, which then condenses into a liquid.

    • The liquid refrigerant is then pumped through an evaporator, where it absorbs heat from the chilled water.

    • The refrigerant then returns to the compressor to repeat the cycle.

    • Chillers can be air-cooled or water-cooled, depending on the application.

    • Chillers...

  • Answered by AI
  • Q2. What's the work of actuator ?
  • Ans. 

    Actuator is a device that converts electrical energy into mechanical motion.

    • Actuators are used in HVAC systems to control the flow of air, water, or steam.

    • They can be electric, pneumatic, or hydraulic.

    • Examples of actuators include valves, dampers, and motors.

    • Actuators are essential for maintaining temperature, humidity, and air quality in HVAC systems.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Your confidence makes you stronger. So Never give up..

I applied via Referral and was interviewed before Mar 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Refrigeration cycle, types of chiller
  • Ans. 

    The refrigeration cycle is a process of removing heat from a space or substance. Types of chillers include absorption, centrifugal, and reciprocating.

    • The refrigeration cycle involves four main components: compressor, condenser, expansion valve, and evaporator

    • Absorption chillers use a heat source to drive the refrigeration cycle, while centrifugal and reciprocating chillers use mechanical energy

    • Centrifugal chillers are ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic of HVAC knowledge and read refrigeration realated topic

I applied via Job Fair and was interviewed in Sep 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(3 Questions)

  • Q1. WHAT IS HVAC FULL FROM
  • Ans. 

    HVAC stands for Heating, Ventilation, and Air Conditioning.

    • HVAC is an acronym for Heating, Ventilation, and Air Conditioning.

    • It refers to the technology used for indoor environmental comfort.

    • HVAC systems are responsible for heating, cooling, and controlling the air quality in buildings.

    • Examples of HVAC equipment include furnaces, air conditioners, heat pumps, and ventilation systems.

  • Answered by AI
  • Q2. What is PAC full from
  • Ans. 

    PAC full form is Package Air Conditioner.

    • PAC is a type of air conditioning system that is self-contained and can be installed in a single package.

    • It is commonly used in commercial and industrial settings.

    • PAC units are designed to be compact and easy to install, making them a popular choice for retrofitting older buildings.

    • Some examples of PAC units include rooftop units, wall-mounted units, and floor-mounted units.

  • Answered by AI
  • Q3. Preactiom Air conditioning

Interview Preparation Tips

Interview preparation tips for other job seekers - Sprit ac, cassette AC, duct ac , vrf and vrv unit service and repair / chillar plant operator

I applied via Approached by Company and was interviewed in May 2022. There were 4 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. Speak about yourself
Round 2 - Assignment 
Round 3 - Technical 

(1 Question)

  • Q1. Questions to test knowledge of the market
Round 4 - Technical 

(1 Question)

  • Q1. Market related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Get an idea about the company, their projects. Ask questions to interviewers.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Jun 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Colour coding Regarding resistance
  • Ans. 

    Resistance values are often color coded on resistors to easily identify their resistance value.

    • Color coding is used on resistors to indicate their resistance value

    • The colors represent numbers according to a specific color code chart

    • The first two bands represent the first two digits of the resistance value, the third band represents the multiplier, and the fourth band represents the tolerance

    • For example, a resistor with...

  • Answered by AI
  • Q2. Symbol of doide
  • Ans. 

    The symbol of a diode is an arrow pointing towards a line, representing the flow of current in one direction only.

    • Arrow pointing towards a line

    • Flow of current in one direction only

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Speak cofedentely
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in May 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. TFH information
  • Q2. Technical all questions

Interview Preparation Tips

Topics to prepare for Leadec India Technician interview:
  • Technical

I applied via Referral and was interviewed in Aug 2021. There was 1 interview round.

Round 1 - HR 

(8 Questions)

  • Q1. Why should we hire you?
  • Q2. What are your strengths and weaknesses?
  • Q3. Where do you see yourself in 5 years?
  • Q4. Why are you looking for a change?
  • Q5. Share details of your previous job.
  • Q6. What is your family background?
  • Q7. What are your salary expectations?
  • Q8. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepare before going for interview. Have knowledge about the position you are applying. Be ready with your short introduction about yourself.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(3 Questions)

  • Q1. What is current
  • Ans. 

    Current is the flow of electric charge in a circuit.

    • Current is measured in Amperes (A)

    • It is the rate of flow of electric charge through a conductor

    • Direct current (DC) flows in one direction, while alternating current (AC) changes direction periodically

  • Answered by AI
  • Q2. What is working of circuit breaker
  • Ans. 

    A circuit breaker is an electrical switch designed to protect an electrical circuit from damage caused by overload or short circuit.

    • Circuit breakers detect faults in the electrical system and interrupt the flow of electricity to prevent damage.

    • They consist of a switch mechanism and a tripping mechanism that activates when a fault is detected.

    • Circuit breakers can be reset manually or automatically after tripping.

    • Example...

  • Answered by AI
  • Q3. What is transformer
  • Ans. 

    A transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction.

    • Consists of two coils of wire (primary and secondary) wrapped around a core

    • Primary coil receives electrical energy and creates a magnetic field

    • Magnetic field induces a voltage in the secondary coil, transferring energy

    • Used in power distribution, voltage regulation, and electrical isolati...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Yes
Contribute & help others!
anonymous
You can choose to be anonymous

Enova Facilities Management LLC Interview FAQs

How many rounds are there in Enova Facilities Management LLC Technician interview?
Enova Facilities Management LLC interview process usually has 4 rounds. The most common rounds in the Enova Facilities Management LLC interview process are Technical, HR and Group Discussion.
What are the top questions asked in Enova Facilities Management LLC Technician interview?

Some of the top questions asked at the Enova Facilities Management LLC Technician interview -

  1. What kinds of pipe used for hot and cold water suppl...read more
  2. How you will find a fault in ...read more
  3. What you will do if the fault comes in fixed pipe in wa...read more

Recently Viewed

INTERVIEWS

NATIONAL SKILL DEVELOPMENT CORPORATION

No Interviews

INTERVIEWS

Tech Mahindra Foundation

No Interviews

INTERVIEWS

Maruti Suzuki

No Interviews

INTERVIEWS

Maruti Suzuki

No Interviews

LIST OF COMPANIES

Datamatics Global Services

Locations

LIST OF COMPANIES

Emerson Electric Co.

Locations

LIST OF COMPANIES

Allied Digital Services

Locations

LIST OF COMPANIES

Onward Technologies Inc

Locations

REVIEWS

Vodafone Idea

No Reviews

LIST OF COMPANIES

Discover companies

Find best workplace

Tell us how to improve this page.

Enova Facilities Management LLC Technician Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Enova Facilities Management LLC Technician Reviews and Ratings

based on 2 reviews

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

5.0

Salary

5.0

Job security

5.0

Company culture

5.0

Promotions

5.0

Work satisfaction

Explore 2 Reviews and Ratings
Electrical Technician
10 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Hvac Technician
9 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Electrical Engineer
6 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

MEP Supervisor
6 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Hvac Supervisor
6 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Enova Facilities Management LLC with

JLL

4.1
Compare

CBRE

4.2
Compare

Sodexo

4.1
Compare

Compass Group Support Services

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent