Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Tata Steel Quality Assurance Interview Questions, Process, and Tips

Updated 17 Sep 2024

Tata Steel Quality Assurance Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via AmbitionBox and was interviewed in Aug 2024. There were 3 interview rounds.

Round 1 - Technical 

(5 Questions)

  • Q1. Define the voltage and current
  • Ans. 

    Voltage is the measure of electrical potential difference, while current is the flow of electric charge.

    • Voltage is measured in volts (V) and represents the potential difference between two points in a circuit

    • Current is measured in amperes (A) and represents the flow of electric charge through a circuit

    • Ohm's Law relates voltage, current, and resistance: V = I * R

    • Voltage sources include batteries, power supplies, and gen...

  • Answered by AI
  • Q2. Define the analog and digital signal
  • Ans. 

    Analog signals are continuous, varying in amplitude and frequency. Digital signals are discrete, represented by binary numbers.

    • Analog signals have infinite possible values within a range

    • Digital signals have only two possible values, 0 and 1

    • Examples of analog signals include sound waves and light waves

    • Examples of digital signals include computer data and CDs

  • Answered by AI
  • Q3. Define the electrical and electronics
  • Ans. 

    Electrical engineering deals with the study and application of electricity, electronics focuses on the study of electronic components and systems.

    • Electrical engineering involves the generation, distribution, and utilization of electrical power.

    • Electronics focuses on the design and development of electronic circuits, devices, and systems.

    • Examples of electrical engineering include power generation plants, transmission li...

  • Answered by AI
  • Q4. Define the diode and semiconductor devices
  • Ans. 

    A diode is a semiconductor device that allows current to flow in one direction only.

    • Diodes are made of semiconductor materials such as silicon or germanium.

    • They have two terminals - an anode and a cathode.

    • When a positive voltage is applied to the anode and a negative voltage to the cathode, the diode conducts electricity.

    • Diodes are commonly used in rectifiers, voltage regulators, and signal demodulation.

    • Examples of dio...

  • Answered by AI
  • Q5. Define the ohm’s law formula
  • Ans. 

    Ohm's law formula relates voltage, current, and resistance in an electrical circuit.

    • Ohm's law formula is V = I * R

    • V represents voltage in volts

    • I represents current in amperes

    • R represents resistance in ohms

    • The formula can be rearranged to solve for different variables, such as I = V / R or R = V / I

  • Answered by AI
Round 2 - Coding Test 

Electronics coding decoding

Round 3 - Coding Test 

What is coding decoding

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Feb 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Work related question
Round 3 - HR 

(1 Question)

  • Q1. Family background, about my self job related question

Interview Preparation Tips

Interview preparation tips for other job seekers - Bring positive and energy and do something ahead of time that makes you feel invincible interviewing always be able to talk about the situation.

I applied via Naukri.com and was interviewed in Dec 2021. There were 2 interview rounds.

Round 1 - Aptitude Test 
Round 2 - Technical 

(1 Question)

  • Q1. What is 5S? What is QC and QA different between? What is the TPM?
  • Ans. 

    5S is a workplace organization method that aims to improve efficiency and productivity.

    • 5S stands for Sort, Set in Order, Shine, Standardize, and Sustain

    • QC (Quality Control) is focused on identifying defects in products or services, while QA (Quality Assurance) is focused on preventing defects from occurring in the first place

    • TPM (Total Productive Maintenance) is a system that aims to maximize equipment effectiveness an...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Quality assurance and quality control department is basically knowledge and ducment knowledge and quality control and calipers micrometer gugaging id
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Oct 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

General discussion about my job

Round 2 - Technical 

(1 Question)

  • Q1. In detail knowledge about my job
Round 3 - Technical 

(1 Question)

  • Q1. Why choose this company

I applied via Recruitment Consulltant

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Conveyor Grades, Hydraulic system it's grade tan value, nas value
  • Ans. How will you asset for this organisation
  • Answered Anonymously
Round 3 - Behavioral 

(1 Question)

  • Q1. What are your achievements, how can you be beneficial for the company.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be clear and specific about your job role and KPI, mention your achievements, and profits you can given.
Never lie, please be clear if you don't know
Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
No response

I applied via Naukri.com and was interviewed in May 2024. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Preffered Location
  • Q2. Salary expectation
Round 2 - Technical 

(3 Questions)

  • Q1. Sheet pile use in damp & flood area
  • Ans. 

    Sheet piles are commonly used in damp and flood-prone areas to provide structural support and prevent water infiltration.

    • Sheet piles are driven into the ground to create a barrier against water seepage.

    • They are often made of steel or vinyl and are interlocked to form a continuous wall.

    • Sheet piles can be used in cofferdams, seawalls, and flood protection systems.

    • They are effective in preventing soil erosion and protecti...

  • Answered by AI
  • Q2. Wind load calculation
  • Q3. Grade of concrete
  • Ans. 

    Grade of concrete refers to the strength of the concrete mix design.

    • Grade of concrete is denoted by the ratio of cement to sand to aggregate.

    • Common grades of concrete include M10, M15, M20, etc.

    • Higher grade concrete has higher strength and durability.

    • For example, M20 concrete has a compressive strength of 20 MPa.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Know about your previous work experience as per mention in cv
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
Selected Selected
Round 1 - Aptitude Test 

Basic exam with some technical questions

Round 2 - Group Discussion 

Group of 6 were given a topic and we discussed.

Round 3 - Technical 

(2 Questions)

  • Q1. Difference between structural bridge and concrete bridge?
  • Ans. 

    Structural bridges can be made of various materials while concrete bridges specifically use concrete as the primary material.

    • Structural bridges can be made of steel, wood, or other materials, while concrete bridges are primarily made of concrete.

    • Concrete bridges are known for their durability and strength, making them a popular choice for infrastructure projects.

    • Structural bridges may require more maintenance and upkee...

  • Answered by AI
  • Q2. Howrah bridge structure?
  • Ans. 

    The Howrah Bridge is a cantilever bridge that spans the Hooghly River in West Bengal, India.

    • Built in 1943, it is one of the busiest bridges in the world, carrying over 100,000 vehicles and countless pedestrians daily.

    • The bridge does not have any nuts or bolts and is held together by rivets.

    • It is a famous landmark in Kolkata and is often referred to as the 'Gateway of Kolkata'.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good to go as a fresher.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
-

I applied via Campus Placement and was interviewed before Aug 2022. There were 3 interview rounds.

Round 1 - Aptitude Test 

Prepare the core subjects som Thermo fluids and asked some of the manufacturing process

Round 2 - Group Discussion 

How we can reduce the use of non renewable resources

Round 3 - Technical 

(2 Questions)

  • Q1. Hooks law, modulus of rigidity,stress strain curve
  • Q2. About your industrial training
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed before Apr 2023.

Round 1 - Group Discussion 

Debate on multiple topics

Round 2 - Technical 

(1 Question)

  • Q1. Questions related to Operation Research
Round 3 - Case Study 

Come out with a conclusion and solutions to a problem

Round 4 - HR 

(1 Question)

  • Q1. About previous experience, challenges and accolades.

I applied via Naukri.com and was interviewed in May 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Why you leave the privious company.

Interview Preparation Tips

Interview preparation tips for other job seekers - Mainly U have to strong with your technical skills.
Contribute & help others!
anonymous
You can choose to be anonymous

Tata Steel Interview FAQs

How many rounds are there in Tata Steel Quality Assurance interview?
Tata Steel interview process usually has 3 rounds. The most common rounds in the Tata Steel interview process are Coding Test and Technical.
What are the top questions asked in Tata Steel Quality Assurance interview?

Some of the top questions asked at the Tata Steel Quality Assurance interview -

  1. Define the diode and semiconductor devi...read more
  2. Define the analog and digital sig...read more
  3. Define the electrical and electron...read more

Recently Viewed

INTERVIEWS

Jindal Steel and Power

No Interviews

SALARIES

Principal Global Services

DESIGNATION

INTERVIEWS

Aon

No Interviews

SALARIES

Tata AIA Life Insurance

SALARIES

Reliance Nippon Life Insurance

REVIEWS

Tata AIA Life Insurance

No Reviews

SALARIES

Star Wire India

SALARIES

Star Wire India

REVIEWS

PCBL Chemical Limited

No Reviews

Tell us how to improve this page.

Tata Steel Quality Assurance Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

JSW Steel Interview Questions
3.9
 • 592 Interviews
Jindal Stainless Interview Questions
4.2
 • 206 Interviews
JSW Group Interview Questions
3.9
 • 109 Interviews
Jindal Saw Interview Questions
4.0
 • 99 Interviews
Rashmi Metaliks Interview Questions
3.4
 • 79 Interviews
Viraj Profiles Interview Questions
3.8
 • 76 Interviews
View all
Tata Steel Quality Assurance Salary
based on 9 salaries
₹2 L/yr - ₹3.6 L/yr
37% less than the average Quality Assurance Salary in India
View more details

Tata Steel Quality Assurance Reviews and Ratings

based on 4 reviews

3.8/5

Rating in categories

3.2

Skill development

3.8

Work-life balance

3.8

Salary

4.4

Job security

4.1

Company culture

3.2

Promotions

4.1

Work satisfaction

Explore 4 Reviews and Ratings
Manager
1.6k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
1.5k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Manager
1.2k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Associate Engineer
910 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Engineer
900 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Tata Steel with

JSW Steel

3.9
Compare

Steel Authority Of India

4.1
Compare

Vedanta Limited

3.8
Compare

ArcelorMittal Nippon Steel

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent