Upload Button Icon Add office photos

Jindal Steel and Power

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Jindal Steel and Power Quality Assurance Interview Questions and Answers

Updated 5 Jun 2022

Jindal Steel and Power Quality Assurance Interview Experiences

1 interview found

I applied via Naukri.com and was interviewed in Dec 2021. There were 2 interview rounds.

Round 1 - Aptitude Test 
Round 2 - Technical 

(1 Question)

  • Q1. What is 5S? What is QC and QA different between? What is the TPM?
  • Ans. 

    5S is a workplace organization method that aims to improve efficiency and productivity.

    • 5S stands for Sort, Set in Order, Shine, Standardize, and Sustain

    • QC (Quality Control) is focused on identifying defects in products or services, while QA (Quality Assurance) is focused on preventing defects from occurring in the first place

    • TPM (Total Productive Maintenance) is a system that aims to maximize equipment effectiveness an...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Quality assurance and quality control department is basically knowledge and ducment knowledge and quality control and calipers micrometer gugaging id

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via AmbitionBox and was interviewed in Aug 2024. There were 3 interview rounds.

Round 1 - Technical 

(5 Questions)

  • Q1. Define the voltage and current
  • Ans. 

    Voltage is the measure of electrical potential difference, while current is the flow of electric charge.

    • Voltage is measured in volts (V) and represents the potential difference between two points in a circuit

    • Current is measured in amperes (A) and represents the flow of electric charge through a circuit

    • Ohm's Law relates voltage, current, and resistance: V = I * R

    • Voltage sources include batteries, power supplies, and gen...

  • Answered by AI
  • Q2. Define the analog and digital signal
  • Ans. 

    Analog signals are continuous, varying in amplitude and frequency. Digital signals are discrete, represented by binary numbers.

    • Analog signals have infinite possible values within a range

    • Digital signals have only two possible values, 0 and 1

    • Examples of analog signals include sound waves and light waves

    • Examples of digital signals include computer data and CDs

  • Answered by AI
  • Q3. Define the electrical and electronics
  • Ans. 

    Electrical engineering deals with the study and application of electricity, electronics focuses on the study of electronic components and systems.

    • Electrical engineering involves the generation, distribution, and utilization of electrical power.

    • Electronics focuses on the design and development of electronic circuits, devices, and systems.

    • Examples of electrical engineering include power generation plants, transmission li...

  • Answered by AI
  • Q4. Define the diode and semiconductor devices
  • Ans. 

    A diode is a semiconductor device that allows current to flow in one direction only.

    • Diodes are made of semiconductor materials such as silicon or germanium.

    • They have two terminals - an anode and a cathode.

    • When a positive voltage is applied to the anode and a negative voltage to the cathode, the diode conducts electricity.

    • Diodes are commonly used in rectifiers, voltage regulators, and signal demodulation.

    • Examples of dio...

  • Answered by AI
  • Q5. Define the ohm’s law formula
  • Ans. 

    Ohm's law formula relates voltage, current, and resistance in an electrical circuit.

    • Ohm's law formula is V = I * R

    • V represents voltage in volts

    • I represents current in amperes

    • R represents resistance in ohms

    • The formula can be rearranged to solve for different variables, such as I = V / R or R = V / I

  • Answered by AI
Round 2 - Coding Test 

Electronics coding decoding

Round 3 - Coding Test 

What is coding decoding

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Feb 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Work related question
Round 3 - HR 

(1 Question)

  • Q1. Family background, about my self job related question

Interview Preparation Tips

Interview preparation tips for other job seekers - Bring positive and energy and do something ahead of time that makes you feel invincible interviewing always be able to talk about the situation.

Interview Questionnaire 

1 Question

  • Q1. Iron-Carbon Phase diagram, CCT curves, Pearlite,lever rule

Interview Preparation Tips

Round: Test
Experience: It was online test and was aptitude section first. Questions were easy and later there were questions on English grammer and comprehension which would require 10th level knowledge. At last there will be 25 technical questions. Surprisingly, most of them were factual.
Tips: Pick up any aptitude book and practise it to improve your problem solving speed.
Duration: 1 hour 30 minutes
Total Questions: 90

Round: Technical + HR Interview
Experience: I was asked to draw Iron Carbon phase diagram and CCT curves. I was also tested about lever rule and eutectoid composition.
Tips: Coursework would suffice

College Name: IIT Madras

Intern Interview Questions & Answers

Tata Steel user image kunal mamile

posted on 28 Aug 2017

Interview Questionnaire 

1 Question

  • Q1. Tell me about yourself. Questions regarding Iron-Carbon diagram and CCT curves

Interview Preparation Tips

Round: Test
Experience: Basically there were some aptitude questions which were easy and English grammer(10th level) was asked. About technical aspect, questions were mostly factual.
Tips: For technical, prepare specifically for factual questions from your coursework. For aptitude part, focus on speed of solving problems.
Duration: 1 hour 30 minutes
Total Questions: 90

Round: Technical + HR Interview
Experience: I was asked about myself and extra-curricular activities first followed by some technical questions about iron-carbon phase diagram and lever rule.
Tips: Course work would suffice

College Name: IIT Madras
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. What about safety?
  • Ans. 

    Safety is a top priority in all aspects of operations to ensure the well-being of employees and customers.

    • Implementing and enforcing safety protocols and procedures

    • Providing regular safety training for employees

    • Conducting safety inspections and audits

    • Promoting a safety culture among staff

    • Ensuring compliance with safety regulations and standards

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. About salary negotiable

I applied via Campus Placement and was interviewed before Jul 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. What is marginal Costing
  • Ans. 

    Marginal costing is a technique of cost accounting which deals with the ascertainment of marginal cost and its use in decision making.

    • It is a method of cost accounting that focuses on the variable costs of production.

    • It helps in determining the contribution margin of a product or service.

    • It is useful in making short-term decisions such as pricing, make or buy, etc.

    • It does not take into account fixed costs while calcula...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - What is Marginal Costing
Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
No response

I applied via Naukri.com and was interviewed in May 2024. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Preffered Location
  • Q2. Salary expectation
Round 2 - Technical 

(3 Questions)

  • Q1. Sheet pile use in damp & flood area
  • Ans. 

    Sheet piles are commonly used in damp and flood-prone areas to provide structural support and prevent water infiltration.

    • Sheet piles are driven into the ground to create a barrier against water seepage.

    • They are often made of steel or vinyl and are interlocked to form a continuous wall.

    • Sheet piles can be used in cofferdams, seawalls, and flood protection systems.

    • They are effective in preventing soil erosion and protecti...

  • Answered by AI
  • Q2. Wind load calculation
  • Q3. Grade of concrete
  • Ans. 

    Grade of concrete refers to the strength of the concrete mix design.

    • Grade of concrete is denoted by the ratio of cement to sand to aggregate.

    • Common grades of concrete include M10, M15, M20, etc.

    • Higher grade concrete has higher strength and durability.

    • For example, M20 concrete has a compressive strength of 20 MPa.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Know about your previous work experience as per mention in cv

I applied via Recruitment Consulltant

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Conveyor Grades, Hydraulic system it's grade tan value, nas value
  • Ans. How will you asset for this organisation
  • Answered Anonymously
Round 3 - Behavioral 

(1 Question)

  • Q1. What are your achievements, how can you be beneficial for the company.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be clear and specific about your job role and KPI, mention your achievements, and profits you can given.
Never lie, please be clear if you don't know
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Oct 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

General discussion about my job

Round 2 - Technical 

(1 Question)

  • Q1. In detail knowledge about my job
Round 3 - Technical 

(1 Question)

  • Q1. Why choose this company
Contribute & help others!
anonymous
You can choose to be anonymous

Jindal Steel and Power Interview FAQs

How many rounds are there in Jindal Steel and Power Quality Assurance interview?
Jindal Steel and Power interview process usually has 2 rounds. The most common rounds in the Jindal Steel and Power interview process are Technical and Aptitude Test.

Recently Viewed

INTERVIEWS

Shriram Life Insurance

No Interviews

SALARIES

Star Health & Allied Insurance

INTERVIEWS

PCBL Chemical Limited

No Interviews

REVIEWS

Star Health & Allied Insurance

No Reviews

INTERVIEWS

Jindal Saw

No Interviews

INTERVIEWS

Sree Vidyanikethan International School

No Interviews

INTERVIEWS

PNB MetLife

No Interviews

DESIGNATION

DESIGNATION

INTERVIEWS

Gallagher

No Interviews

Tell us how to improve this page.

Interview Questions from Similar Companies

Tata Steel Interview Questions
4.1
 • 855 Interviews
JSW Steel Interview Questions
3.9
 • 589 Interviews
Jindal Stainless Interview Questions
4.2
 • 205 Interviews
JSW Group Interview Questions
3.9
 • 109 Interviews
Jindal Saw Interview Questions
4.0
 • 99 Interviews
Rashmi Metaliks Interview Questions
3.4
 • 77 Interviews
View all
Assistant Manager
2.2k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Engineer
1k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
977 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer
763 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
615 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Jindal Steel and Power with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Steel Authority Of India

4.1
Compare

Vedanta Limited

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent