Upload Button Icon Add office photos

Jindal Steel and Power

Compare button icon Compare button icon Compare

Filter interviews by

Jindal Steel and Power Production Engineer Interview Questions, Process, and Tips

Updated 17 Oct 2023

Top Jindal Steel and Power Production Engineer Interview Questions and Answers

View all 8 questions

Jindal Steel and Power Production Engineer Interview Experiences

5 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Jun 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

More Subsidies to Farmers or a Better Mechanism for Loan - What should Govt. ...
Villages are the Pride of India.
Advanced food processing technologies or Organic Farming?
Are Farm Subsidies Necessary?
Is Agriculture a Fertile Ground for Digitalisation?

Round 3 - Technical 

(7 Questions)

  • Q1. What is motor?and explain working of motor
  • Ans. 

    A motor is a device that converts electrical energy into mechanical energy to produce motion.

    • Motors can be classified into different types such as DC motors, AC motors, and stepper motors.

    • The basic working principle of a motor involves the interaction of magnetic fields to generate force and motion.

    • In a DC motor, current flows through a coil within a magnetic field, creating a force that rotates the motor shaft.

    • In an A...

  • Answered by AI
  • Q2. Define transformer? Explain types of transformer?
  • Ans. 

    A transformer is a device that transfers electrical energy between two or more circuits through electromagnetic induction.

    • Transformers are used to increase or decrease voltage levels in electrical circuits.

    • There are two main types of transformers: step-up transformers and step-down transformers.

    • Step-up transformers increase voltage levels, while step-down transformers decrease voltage levels.

    • Other types of transformers...

  • Answered by AI
  • Q3. Different between switch, isolator and circuit breaker?
  • Ans. 

    Switch is used to control the flow of electricity, isolator is used for isolating a circuit, and circuit breaker is used for protecting the circuit from overloads.

    • Switch is used to open or close an electrical circuit, allowing or stopping the flow of electricity.

    • Isolator is used to disconnect a circuit from the power supply for maintenance or repair purposes.

    • Circuit breaker is a device designed to protect an electrical...

  • Answered by AI
  • Q4. What is induction motor?
  • Ans. 

    An induction motor is a type of AC motor where power is supplied to the rotor by electromagnetic induction.

    • Consists of a stator and a rotor

    • Does not require any physical connection between the rotor and the stator

    • Commonly used in industrial applications for driving pumps, compressors, and fans

  • Answered by AI
  • Q5. How many types of motor?
  • Ans. 

    There are two main types of motors: AC motors and DC motors.

    • AC motors: Alternating current motors that are commonly used in household appliances and industrial applications.

    • DC motors: Direct current motors that are often used in battery-operated devices and automotive applications.

  • Answered by AI
  • Q6. Explain difference between switch, isolator and circuit breaker?
  • Ans. 

    Switch is used to make or break an electrical circuit, isolator is used for isolating a circuit for maintenance, and circuit breaker is used for protecting the circuit from overloads and short circuits.

    • Switch is used to manually open or close an electrical circuit.

    • Isolator is used to isolate a circuit for maintenance purposes, ensuring no current flows through it.

    • Circuit breaker is a safety device that automatically in...

  • Answered by AI
  • Q7. Explain how many types of fault?
  • Ans. 

    There are three main types of faults: normal faults, reverse faults, and strike-slip faults.

    • Normal faults occur when the hanging wall drops down relative to the footwall. Example: Basin and Range Province in the western United States.

    • Reverse faults occur when the hanging wall moves up relative to the footwall. Example: Rocky Mountains in North America.

    • Strike-slip faults occur when the blocks slide past each other horiz...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Sep 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

Production Engineer questions in carbon steel. And. Seamless pipe

Round 3 - Technical 

(1 Question)

  • Q1. Production. Furnace maintenance. & Testing

Interview Preparation Tips

Interview preparation tips for other job seekers - Only for production Engineer (Quenching. Tempering & Annealing)
Furnace Maintenance

Production Engineer Interview Questions Asked at Other Companies

Q1. How to solve the problem in robot means how to detect fault?
asked in Foxconn
Q2. If product a fails in last stage what is root cause ?
Q3. Minimum value measure by vernier caliper?
Q4. difference between mass production and batch production?
Q5. Did you know about soldering and what is the criteria for solderi ... read more
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Jan 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. What to conveyor belt related questions
  • Q2. Why to conveyor line experience in jspl
  • Ans. 

    Conveyor line experience in JSPL is relevant to the Production Engineer role.

    • JSPL has a large-scale conveyor system for transporting raw materials and finished products.

    • Experience with conveyor systems is important for optimizing production efficiency.

    • Knowledge of conveyor maintenance and troubleshooting is also valuable.

    • JSPL's conveyor system includes various types of conveyors such as belt, screw, and bucket conveyor...

  • Answered by AI
  • Q3. This types conveyor maintenance

Interview Preparation Tips

Interview preparation tips for other job seekers - I am conveyor belt maintenance working experience in jspl.
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Rolling mill hydraulic systems and maintenance
  • Q2. Hydraulic pump and valve maintenance

Interview Preparation Tips

Interview preparation tips for other job seekers - good communication for teem and excellent team work for job milegi to

Jindal Steel and Power interview questions for designations

 Junior Engineer Production

 (1)

 Production Supervisor

 (3)

 Production Graduate Engineer Trainee

 (1)

 Junior Engineer

 (18)

 Electrical Engineer

 (7)

 Mechanical Engineer

 (5)

 Assistant Engineer

 (4)

 Executive Engineer

 (3)

I applied via Company Website and was interviewed in Nov 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Please share for interview date
  • Q2. 10+ experience in pepsico & godrej

Interview Preparation Tips

Interview preparation tips for other job seekers - All technical issues resolve in plant

Get interview-ready with Top Jindal Steel and Power Interview Questions

Interview questions from similar companies

I applied via Campus Placement and was interviewed before Jun 2021. There were 3 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. 20 Technical questions Bomb calorie meter, compressor, thermal, power, maths etc
Round 2 - Group Discussion 

Always start first and be crisp and interactive and stick to the topic

Round 3 - Interview 

(1 Question)

  • Q1. Questions about Compressor specifically Screw compressor, Pumps , pipes bends and its losses, Safe working load, erosion, joints , seamless, Fluid mechanics,pipes,

Interview Preparation Tips

Topics to prepare for Vedanta Limited Production Engineer interview:
  • Fluid Mechanics
Interview preparation tips for other job seekers - Follow your path and trust yourself and your answers stick to the topic and be interective.
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Nov 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. Shaft daimeter 40 mm wy bearings no
  • Q2. Ferro silicon melting point wy
  • Q3. Which composition is a ci casting
  • Ans. 

    CI casting refers to cast iron casting, which is made from a composition of iron, carbon, and silicon.

    • CI casting stands for cast iron casting.

    • It is made from a composition of iron, carbon, and silicon.

    • The carbon content in CI casting is typically between 2.1% and 4%.

    • The silicon content in CI casting is typically between 1% and 3%.

    • CI casting is known for its excellent castability, good machinability, and high wear resis

  • Answered by AI
  • Q4. High crome metal pouring temperature
  • Ans. 

    The pouring temperature of high chrome metal is typically between 1,600 to 1,800 degrees Celsius.

    • High chrome metal is commonly used in applications that require high temperature resistance and corrosion resistance.

    • The pouring temperature is crucial to ensure proper flow and solidification of the metal.

    • The specific pouring temperature may vary depending on the exact composition of the high chrome metal and the desired p...

  • Answered by AI
  • Q5. Maild steel campotion
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Dec 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Heat tranfer, heat exchanger, types of pump snd typed of resctor, condenser gas cooler chiller types of sgitator etc.
  • Q2. Types of vaccume pump
  • Ans. 

    There are several types of vacuum pumps, including rotary vane, diaphragm, scroll, and turbomolecular pumps.

    • Rotary vane pumps are commonly used in industrial applications and have a simple design.

    • Diaphragm pumps are oil-free and used in applications where contamination is a concern.

    • Scroll pumps are oil-free and used in applications where a clean vacuum is required.

    • Turbomolecular pumps are used in high vacuum applicatio...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I am perfect chemical engineer of on your plant production department any opportunity
Thanku
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Jan 2024. There were 2 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. Tell me about about yourself?family background.
  • Ans. 

    I come from a close-knit family with a strong work ethic and values.

    • Family is very important to me and has played a significant role in shaping who I am today.

    • My parents have always emphasized the importance of hard work and perseverance.

    • I have a supportive family who has always encouraged me to pursue my goals and dreams.

    • Growing up, I learned the value of teamwork and communication from my siblings.

  • Answered by AI
  • Q2. Since I was from caustic chlorine background so they asked me about cl2 emergency handling ,TLV value
  • Q3. Hcl synthesis process,and it's interlock ,problem in hcl furnace,
  • Ans. 

    HCl synthesis process, interlocks, and problems in HCl furnace.

    • HCl synthesis involves combining hydrogen gas and chlorine gas in the presence of a catalyst.

    • Interlocks in the process ensure safety measures are in place to prevent accidents.

    • Common problems in HCl furnaces include corrosion, leaks, and temperature control issues.

  • Answered by AI
Round 2 - Technical 

(2 Questions)

  • Q1. What will happen when flow of cooling water reduces in furnace?
  • Ans. 

    Reduced flow of cooling water in furnace can lead to overheating, potential damage to equipment, and decreased efficiency.

    • Overheating of furnace components

    • Potential damage to furnace equipment

    • Decreased efficiency in cooling process

  • Answered by AI
  • Q2. What is the impact when freon compressor got tripped and what to do ?
  • Ans. 

    When a freon compressor gets tripped, it can lead to a loss of cooling capacity and potential damage to the system.

    • Check for any fault codes or alarms on the compressor control panel.

    • Inspect the compressor for any visible signs of damage or overheating.

    • Reset the compressor and monitor its operation to ensure it is functioning properly.

    • Investigate the root cause of the trip to prevent future occurrences.

    • Consider contact...

  • Answered by AI
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
-
Result
Selected Selected

I applied via Campus Placement

Round 1 - Aptitude Test 

Test contains reasoning , maths and few questions related to mechanical engineering

Round 2 - One-on-one 

(2 Questions)

  • Q1. This is a technical round in which we had interact with the senior officer of related department
  • Q2. Iron carbon diagram, material properties, college project, forging process

Jindal Steel and Power Interview FAQs

How many rounds are there in Jindal Steel and Power Production Engineer interview?
Jindal Steel and Power interview process usually has 2-3 rounds. The most common rounds in the Jindal Steel and Power interview process are Technical, Resume Shortlist and Group Discussion.
How to prepare for Jindal Steel and Power Production Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Jindal Steel and Power. The most common topics and skills that interviewers at Jindal Steel and Power expect are Fabrication, Production and Production Engineering.
What are the top questions asked in Jindal Steel and Power Production Engineer interview?

Some of the top questions asked at the Jindal Steel and Power Production Engineer interview -

  1. What is motor?and explain working of mo...read more
  2. Different between switch, isolator and circuit break...read more
  3. Explain difference between switch, isolator and circuit breake...read more

Tell us how to improve this page.

Jindal Steel and Power Production Engineer Interview Process

based on 8 interviews

1 Interview rounds

  • Resume Shortlist Round
View more
Jindal Steel and Power Production Engineer Salary
based on 30 salaries
₹2 L/yr - ₹4.5 L/yr
17% less than the average Production Engineer Salary in India
View more details

Jindal Steel and Power Production Engineer Reviews and Ratings

based on 11 reviews

4.3/5

Rating in categories

4.3

Skill development

4.3

Work-life balance

4.3

Salary

4.4

Job security

4.2

Company culture

4.0

Promotions

4.2

Work satisfaction

Explore 11 Reviews and Ratings
Assistant Manager
2.2k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
1k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Engineer
1k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer
755 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
615 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Jindal Steel and Power with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Steel Authority Of India

4.1
Compare

Vedanta Limited

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview