Tata Steel Junior Engineer Operations Interview Questions and Answers

Q1. How to check the motor
Ans. 
To check the motor, you can perform various tests and inspections to ensure it is functioning properly.
• Check for any physical damage or wear on the motor casing

• Inspect the wiring connections for any loose or damaged wires

• Measure the voltage and current going into the motor to ensure it is within the specified range

• Test the motor's insulation resistance to check for any faults

• Run the motor under load to see if it operat
Answered by AI
Add your answer
Q2. How to do power analysis
Ans. 
Power analysis involves measuring and analyzing the electrical power consumption of a system or device.
• Identify the components of the system or device that consume power.

• Measure the current and voltage across these components using appropriate instruments.

• Calculate the power consumption using the formula P = VI, where P is power, V is voltage, and I is current.

• Analyze the power consumption data to identify any ineffici...read more
Answered by AI
Add your answer
Q3. What is tranfamer
Ans. 
A transformer is a device that transfers electrical energy between two or more circuits through electromagnetic induction.
• Transformers are used to increase or decrease voltage levels in electrical circuits.

• They consist of two coils of wire, known as the primary and secondary coils.

• Examples of transformers include power transformers used in electrical substations and voltage transformers in electronic devices.
Answered by AI
Add your answer

Q1. Any angle questions apply on my mechanical engineering diploma
View 1 more answer
Q2. I'm very interested sub Theoryof machine
Add your answer
Q3. Automobile interested
Add your answer
Q4. I like Jindal stainless-steel
Add your answer

Q1. I'm very very interested for job in Jindal stainless steel
Add your answer

Q1. Types of welding
Ans. 
Types of welding include MIG, TIG, stick, and flux-cored welding.
• MIG welding uses a wire electrode and shielding gas.

• TIG welding uses a tungsten electrode and inert gas.

• Stick welding uses a consumable electrode coated in flux.

• Flux-cored welding uses a tubular wire filled with flux.

• Other types include spot welding, laser welding, and resistance welding.
Answered by AI
Add your answer
Q2. Engeneering Material also read
Add your answer

Q1. Boiler working principle explain
Ans. 
Boiler works by heating water to create steam, which is used to generate power or heat.
• Boiler heats water to create steam through combustion of fuel or electricity

• Steam produced is used for various applications like power generation or heating

• Boiler components include burner, combustion chamber, heat exchanger, and controls
Answered by AI
Add your answer

Q1. We will only hold you but did not increment is that ok for you
Add your answer

Q1. What is the difference between MCB and overload realy?
Ans. 
MCB and overload relay are both electrical protection devices, but they serve different purposes.
• MCB stands for Miniature Circuit Breaker and is used to protect electrical circuits from overcurrents and short circuits.

• Overload relay is used to protect motors and other electrical equipment from excessive current that can cause overheating and damage.

• MCB operates based on the principle of thermal and magnetic tripping, w...read more
Answered by AI
Add your answer
Q2. Working of soft starter?
Ans. 
A soft starter is a device used to gradually start and stop the motor by controlling the voltage applied to it.
• Soft starters are used to reduce the starting current and torque of an electric motor.

• They provide a smooth and controlled acceleration and deceleration of the motor.

• Soft starters can be used in various applications such as pumps, fans, and conveyor belts.

• They typically consist of power electronics, control ci...read more
Answered by AI
Add your answer
Q3. Working of drive?
Ans. 
A drive is a device that reads and writes data to storage media, allowing users to access and store information.
• Drives can be internal or external, such as hard disk drives (HDDs) or solid-state drives (SSDs).

• They use various technologies like magnetic or flash memory to store data.

• Drives are connected to a computer or device through interfaces like SATA, USB, or PCIe.

• They have controllers that manage data transfer and...read more
Answered by AI
Add your answer
Q4. Why we use star delta starter?
Ans. 
Star delta starters are used to reduce the starting current of induction motors.
• Star delta starters are used in applications where the starting current needs to be limited.

• They are commonly used in industries where large motors are employed.

• By starting the motor in star configuration, the current is reduced to one-third of the delta configuration.

• This helps in preventing excessive voltage drop and reduces stress on the...read more
Answered by AI
Add your answer
Q5. What is the protection of transformer?
Ans. 
The protection of a transformer involves various measures to ensure its safe and reliable operation.
• Overcurrent protection: Protects against excessive current flow.

• Overvoltage protection: Guards against high voltage surges.

• Under/over frequency protection: Monitors and controls the frequency of the input power.

• Temperature protection: Prevents overheating by monitoring the transformer's temperature.

• Buchholz relay protect...read more
Answered by AI
Add your answer

Q1. Civil diploma engineering
Add your answer
Q2. Civil junior engineer technical questions
Add your answer
Q3. Contraction question
Add your answer
Q4. Civil junior engineer contraction questions
Add your answer

Q1. Ask me about types of bearings? They also like do you have any idea about sap?
Add your answer
Q2. Ask me about types of bearing? What is the types of welding? About sap?
Add your answer

Be confident in your answer and no more confusing. Think twice, answer Little bit similar but u have to choose one it has a more accurate. Time management is main. What time you did taken to answer for each question.

Talk short with important matter. Your voice should to audible for all.

Q1. This is related to your study. Befor going to interview first you should know the which type of company that is and what they produce. Go to the deep through it on this basis you have to prepare.
Add your answer
Q2. Sketch the Lathe diagram Stress strain diagram About Boiler About hydraulic system About pneumatic system About engines About machanical properties Project principles About manpower handling
Add your answer