AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Tata Sponge Iron Mechanical Engineer Interview Questions, Process, and Tips
Tata Sponge Iron Mechanical Engineer Interview Experiences
1 interview found
I applied via Walk-in and was interviewed in Mar 2022. There were 4 interview rounds.
(10 Questions)
- Q1. I am work experience 8 year in pellet plate from usha martin to tslp group now working as a mechanical shift incharge, if vacancy requirement job, technically i have experiences as a filter cake produce to...
- Ans. At this plant 1.2 mtpa pellet plant, balling disc 05 nos installation with both scrapper big & small with legs, and produce balling with lime and bentonite with proper size maintaining then ball conveying thoughly shuttle conveyors length aprox 10 meter belt with oil pully dram then ball discharge to rollers screen upper deck gap maintaining, we have maintaining gate 16.5 mm for passing aqurate size pellets discharge...
- Q2. How to PCI equipment's maintenance?
- Ans.
PCI equipment maintenance involves regular inspections, cleaning, and repairs to ensure optimal performance and safety.
Create a maintenance schedule based on manufacturer recommendations and usage frequency
Perform regular inspections to identify any signs of wear or damage
Clean equipment regularly to prevent buildup of debris or contaminants
Perform repairs as needed to address any issues or malfunctions
Document all mai...
- Q3. How to T.G equipment's maintenance?
- Ans.
T.G equipment maintenance involves regular inspections, cleaning, lubrication, and replacement of worn-out parts.
Perform regular inspections to identify any signs of wear and tear
Clean the equipment regularly to prevent the buildup of dirt and debris
Lubricate the moving parts to reduce friction and prevent damage
Replace any worn-out parts to prevent equipment failure
Follow the manufacturer's recommended maintenance sch...
- Q4. How to Roller screen maintenance?
- Ans.
Roller screen maintenance involves regular cleaning, lubrication, and inspection.
Clean the rollers and screen regularly to prevent buildup of debris and dirt.
Lubricate the rollers and bearings to ensure smooth operation.
Inspect the rollers, bearings, and screen for wear and damage.
Replace any worn or damaged parts immediately to prevent further damage.
Follow manufacturer's guidelines for maintenance and schedule regula...
- Q5. How to Balling Disc maintenance?
- Ans.
Balling disc maintenance involves regular inspection, cleaning, and lubrication to ensure optimal performance.
Inspect the disc for wear and tear regularly
Clean the disc and surrounding area to prevent buildup of debris
Lubricate the disc and bearings as per manufacturer's recommendations
Check for proper alignment and adjust if necessary
Replace worn out parts as needed
- Q6. How to belt conveyors maintenance?
- Ans.
Belt conveyors maintenance involves regular inspection, cleaning, and lubrication.
Inspect belts for wear and tear
Clean belts and rollers to prevent buildup of debris
Lubricate bearings and other moving parts
Tighten loose bolts and replace damaged parts
Train employees on proper use and maintenance procedures
- Q7. How to lubrication in which type of equipment's.
- Ans.
Lubrication is necessary for smooth functioning of equipment. Different types of equipment require different lubrication methods.
Equipment with moving parts require lubrication to reduce friction and wear.
Oil or grease can be used as lubricants depending on the equipment.
Lubrication intervals should be followed as per manufacturer's recommendations.
Examples of equipment that require lubrication include engines, pumps,
- Q8. Which coupling where applicable?
- Ans.
Couplings are used to connect two shafts together. The type of coupling used depends on the application.
Flexible couplings are used to compensate for misalignment between shafts.
Rigid couplings are used when shafts are perfectly aligned.
Gear couplings are used for high torque applications.
Jaw couplings are used for low to medium torque applications.
Disc couplings are used for high-speed applications.
Chain couplings are...
- Q9. How to fan maintenance work?
- Ans.
Fan maintenance work involves cleaning, lubricating, and inspecting the fan components regularly.
Clean the fan blades and housing to remove dirt and debris
Lubricate the bearings and motor to ensure smooth operation
Inspect the belts, pulleys, and other components for wear and tear
Replace any damaged or worn parts as necessary
Check the fan's alignment and balance to prevent vibration and noise issues
- Q10. Gear box maintenance work?
- Ans.
Gear box maintenance involves regular inspection, lubrication, and replacement of worn-out parts.
Regular inspection of gear teeth and bearings
Lubrication of gears and bearings
Replacement of worn-out parts such as seals and bearings
Checking oil levels and changing oil as needed
Cleaning and inspecting filters
Checking alignment and adjusting as needed
Always be positive for any type for job.
Interview Preparation Tips
- Focus on job
- Attitude
- Communicate
Top trending discussions
Interview questions from similar companies
Moula hussain.M
I applied via Walk-in and was interviewed in Nov 2024. There was 1 interview round.
(2 Questions)
- Q1. How to know if Hydraulic cylinder leakage
- Ans.
Check for hydraulic cylinder leakage by inspecting for oil puddles, decreased performance, and abnormal noises.
Inspect the area around the hydraulic cylinder for oil puddles or stains
Monitor the performance of the hydraulic system for any decrease in efficiency
Listen for any abnormal noises coming from the hydraulic cylinder during operation
- Q2. What is NAS
- Ans.
NAS stands for Network Attached Storage, which is a type of storage device that connects to a network to provide shared storage space.
NAS devices are typically used for storing and sharing files, data backups, and media streaming within a network.
NAS devices can be accessed by multiple users and devices simultaneously over a network.
NAS devices often have their own operating system and can run various applications such...
Interview Preparation Tips
Mechanical Engineer Interview Questions & Answers
ArcelorMittal Nippon Steel
Anonymous
posted on 18 Apr 2024
Selected
I applied via Recruitment Consulltant and was interviewed in Mar 2024. There were 4 interview rounds.
Gearbox and fluid coupling replacement work and development
Senior manager and manager and all employees job description for growth and development
Cash study in machanical engineering decision making thermodynamics fluid machanics and heat transfer
(11 Questions)
- Q1. Gear box replacement work safely first and all ppes sure and paper work and try out checking and saving and job work clean and fresh and tackup up and clamping conveyer belt old gear box replacement for ne...
- Q2. Barring checking and replacement work and safety first and all ppes sure and paper work and try out sure and teckup up and clamping conveyer belt and plummer block top cover open Barring checking and remov...
- Q3. Conveyer belt pmi roller checking work and safety first and all ppes sure and paper work and walked away clean and fresh and Roller cut marking frem number and belt tracking and belt close and try out sure...
- Q4. Barring greasing work and safety first and all ppes sure and paper work and conveyer belt running and walked away clean and fresh and grease gun and greasing work
- Q5. Conveyer belt panching work and safety first and all ppes sure and paper work and try out same position and solution and hardner bad mixed mad belt panching work
- Q6. Conveyer belt chute replacement work and safety first and all ppes sure and paper work and try out and jobs walked away clean and fresh and same chute replace and tightening bolt and machine welding and fi...
- Q7. Conveyer belt v-scraper replacement work and safety first and all ppes sure and paper work belt close and try out and walked away from clean and fresh and same v -scraper making and replacement work
- Q8. Gear box old oil replacement work and safety first and all ppes sure and paper work and belt close and try out and walked away clean and fresh and oil gauge and checking and drain oil and Aw320 oil replac...
- Q9. Fluid coupling oil replacement work and safety first and all ppes sure and paper work and try out lockout and tagout (loto) safety procedure and fuse plug and open west oil remove and new aw46oil replacem...
- Q10. Drive pmi work and safety first and all ppes sure and paper work and try out ofter walked away clean and fresh and bass bolt nut tightening work
- Q11. Gear box cleaning work and safety first and all ppes sure and paper work and walked away clean and fresh and ty out sure and clean and fresh and same process paper work cancelled and conveyer belt running...
Interview Preparation Tips
Selected
I applied via Recruitment Consulltant and was interviewed in Mar 2024. There was 1 interview round.
(11 Questions)
- Q1. Gearbox and fluid coupling replacement work and Roller replacement work and exicider work
- Ans. Yes gear box . fluid Coupling and roller replacement work and exicider working and all conveyor work perfectly
- Q2. Gear box and fluid coupling
- Q3. Canvour safety work and neep point opening very competent work
- Q4. Canvour safety work bad and belt switch and pull code work
- Q5. Conveour and all work
- Q6. Gearl box and vibrating hopper Der screen work
- Q7. All people worker and safety tool box talk about conveour work
- Q8. Parmit formality and loto safety work
- Q9. Safety first shoes , helmet, google, dustmass, and etc
- Q10. Road safety formality work
- Q11. Running conveour gard work
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed in Jun 2024. There was 1 interview round.
(2 Questions)
- Q1. Process of production
- Q2. Final production process
Interview Preparation Tips
- Hot Forging
- Technical Support
- Testing Tools
- Production Planning
- ERP
Mechanical Engineer Interview Questions & Answers
Steel Authority Of India
Anonymous
posted on 25 May 2024
I applied via Company Website and was interviewed in Apr 2024. There were 2 interview rounds.
Gear box replacement work
(6 Questions)
- Q1. Barring checking and replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and blumber block top cover open and old slue Barring remove and new slue...
- Ans.
Blumber block top cover open and old slue Barring remove and new slue Barring replace and nut tightening sure and blumber block top cover fixed and bolts nut tightening sure and paper work cancelled and conveyer belt running ok
- Q2. Motor replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old motor remove and new motor replace and bolts nut tightening s...
- Ans.
Bolt nut open and old motor remove and new motor replace and bolt nut tightening sure and Dayal gauge eliminate process ok and paper work cancelled and conveyer belt running ok
- Q3. V-scraper replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old v-scraper remove new v-scraper replace and bolts nut tigh...
- Q4. Discharge Chute replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old discharge chute remove and new discharge chute repl...
- Ans.
Bolt nut open and old discharge chute remove and new discharge chute replace and bolts nut tightening sure and paper work cancelled and conveyer belt running ok
- Q5. Barring Greasing work and safety first and all ppes sure and paper work and all pulley checking and savings greasing sure and paper work cancelled
- Q6. Gear box replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old gear box remove and new gear box replace and bolts nut tig...
Interview Preparation Tips
Selected
I applied via Company Website and was interviewed in Feb 2024. There was 1 interview round.
(5 Questions)
- Q1. How to make the company better?
- Q2. There should be unity in the company.
- Q3. Attention should be given to how well the employees work in the company.
- Q4. Whoever is the owner of the company or whoever is the manager, it is everyone.Behave well and be honest.
- Q5. Whoever it may be in the company, be it manager or employee, help them for any inconvenience.
Interview Preparation Tips
Selected
I applied via Walk-in
(3 Questions)
- Q1. Mechanical maintenance
- Q2. Any question in mechanical & hydraulics
- Q3. Any mechanical maintenance
Interview Preparation Tips
Mechanical Engineer Interview Questions & Answers
Shyam Steel Industries
Anonymous
posted on 13 Aug 2024
(2 Questions)
- Q1. Tell me about yourself
- Q2. Strength or weakness
Interview Preparation Tips
Mechanical Engineer Interview Questions & Answers
Tata Steel Downstream Products
Anonymous
posted on 29 Aug 2023
Test in apititude you advise in this better position and most great in company
(5 Questions)
- Q1. Different between Forgings and casting
- Ans.
Forging involves shaping metal through compression, while casting involves pouring molten metal into a mold.
Forging involves shaping metal through compressive forces, while casting involves pouring molten metal into a mold to solidify.
Forging typically results in stronger and more durable parts compared to casting.
Forging is a more precise process that allows for tighter tolerances, while casting is more suitable for c...
- Q2. What is the forgings
- Ans.
Forgings are metal components that are shaped by compressive forces, typically through hammering or pressing.
Forgings are typically stronger and more reliable than castings or machined parts.
Common forging processes include open-die forging, closed-die forging, and ring rolling.
Examples of forged components include crankshafts, connecting rods, and gears.
Forgings are often used in industries such as automotive, aerospa
- Q3. What is the casting
- Q4. Process in casting
- Ans.
Process in casting involves pouring molten metal into a mold to create a desired shape.
Mold preparation is crucial for successful casting
Molten metal is poured into the mold cavity
Cooling and solidification of the metal takes place inside the mold
The casting is removed from the mold and finished as needed
- Q5. Process in forging
- Ans.
Forging is a manufacturing process where metal is shaped by applying compressive forces using a hammer or press.
Metal is heated to a high temperature to make it more malleable
The metal is then placed on a die and struck with a hammer or pressed to shape it
Forging can be done using different techniques like open-die forging, closed-die forging, and impression-die forging
Interview Preparation Tips
Firstly thank you for this opportunity
Tata Sponge Iron Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Mechanical Maintenance Engineer Interview Questions
- Diploma Mechanical Engineer Interview Questions
- Mechanical Technician Interview Questions
- Senior Engineer Mechanical Interview Questions
- Mechanical Supervisor Interview Questions
- Junior Mechanical Engineer Interview Questions
- Mechanical Fitter Interview Questions
- Mechanical Maintenance Fitter Interview Questions
- Show more
Mechanical Engineer Interview Questions from Similar Companies
Tata Sponge Iron Mechanical Engineer Reviews and Ratings
based on 1 review
Rating in categories
|
Assistant Manager
16
salaries
|  ₹4.5 L/yr - ₹8.5 L/yr |
|
Engineer
5
salaries
| ₹3.5 L/yr - ₹5.8 L/yr |
|
Deputy Manager
5
salaries
| ₹6.1 L/yr - ₹9 L/yr |
|
Manager
4
salaries
| ₹4.3 L/yr - ₹25 L/yr |
|
Assistant Engineer
3
salaries
| ₹3 L/yr - ₹3.6 L/yr |
JSW Steel
Steel Authority Of India
Jindal Steel and Power
Vedanta Resources
- Home >
- Interviews >
- Tata Sponge Iron Interview Questions >
- Tata Sponge Iron Mechanical Engineer Interview Questions
