Upload Button Icon Add office photos

Suzuki

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Suzuki Manager Learning & Development Interview Questions and Answers

Updated 9 Feb 2024

Suzuki Manager Learning & Development Interview Experiences

1 interview found

Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Naukri.com and was interviewed in Jan 2024. There was 1 interview round.

Interview Preparation Tips

Interview preparation tips for other job seekers - Taken interview..but no feedback or no answer positive or negative..not a single reply..not even picking up the calls properly... giving interview here is waste of time.

Interview questions from similar companies

I appeared for an interview in Dec 2016.

Interview Questionnaire 

4 Questions

  • Q1. Difference between a two stroke and a four stroke engine?
  • Ans. 

    A two-stroke engine completes a power cycle in two strokes of the piston, while a four-stroke engine completes it in four strokes.

    • Two-stroke engines have a simpler design and are lighter than four-stroke engines.

    • Two-stroke engines have a higher power-to-weight ratio but lower fuel efficiency compared to four-stroke engines.

    • Four-stroke engines have separate intake, compression, power, and exhaust strokes, while two-stro...

  • Answered by AI
  • Q2. Pictorial representation of a SI engine with valve opening and showing tdc and bdc.
  • Ans. 

    A pictorial representation of a SI engine with valve opening, TDC, and BDC.

    • SI engine stands for Spark Ignition engine, which is commonly used in gasoline-powered vehicles.

    • Valve opening refers to the movement of the intake and exhaust valves to allow fuel-air mixture in and exhaust gases out of the combustion chamber.

    • TDC (Top Dead Center) is the position of the piston at the extreme top of its stroke.

    • BDC (Bottom Dead Ce...

  • Answered by AI
  • Q3. What change will u make or what improvement will you do to any product manufactured by TVS?
  • Ans. 

    I would improve the fuel efficiency of TVS motorcycles by implementing advanced engine technology.

    • Implementing electronic fuel injection system for better fuel management

    • Introducing hybrid technology for improved mileage

    • Optimizing aerodynamics of the motorcycle for reduced drag

    • Using lightweight materials for better fuel economy

  • Answered by AI
  • Q4. Tell me about yourself.
  • Ans. 

    I am a dedicated production engineer with a strong background in manufacturing processes and quality control.

    • Graduated with a degree in Mechanical Engineering

    • Experience working in a manufacturing plant for 3 years

    • Proficient in CAD software for designing production layouts

    • Implemented lean manufacturing principles to improve efficiency

    • Led a team in reducing production downtime by 20%

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Basic aptitude questions including a few basic technical questions
Duration: 1 hour
Total Questions: 60

Round: Technical + HR Interview
Experience: Interviewers were friendly, started with a casual talk, about themselves then asking about me, my interests and stuff, then they got into technical stuff followed by few HR questions
Tips: Be free and answer confidently

Skills: Presence Of Mind, Technical Skills, Behavioural Skills
College Name: IIT Madras

I applied via Campus Placement and was interviewed before May 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Tell me about your self?

Interview Preparation Tips

Interview preparation tips for other job seekers - .

I applied via Walk-in and was interviewed before Nov 2020. There was 1 interview round.

Interview Questionnaire 

5 Questions

  • Q1. What is circuit breaker?
  • Ans. 

    A circuit breaker is an electrical switch that automatically interrupts the flow of current when it exceeds a certain limit.

    • It is used to protect electrical circuits from damage caused by overloading or short circuits.

    • It works by detecting the excess current and tripping the switch to break the circuit.

    • It can be reset manually or automatically depending on the type of circuit breaker.

    • Examples include thermal circuit br...

  • Answered by AI
  • Q2. What is contactor?
  • Ans. 

    A contactor is an electrical switch used for switching an electrical circuit on or off.

    • It is used to control electric motors, lighting, heating, and other electrical loads.

    • It consists of a coil, contacts, and an enclosure.

    • The coil generates a magnetic field that pulls the contacts together to close the circuit.

    • Examples include HVAC systems, elevators, and industrial machinery.

    • Contactor ratings are based on the amount o...

  • Answered by AI
  • Q3. What is MCB?
  • Ans. 

    MCB stands for Miniature Circuit Breaker. It is an electrical switch that automatically shuts off the electrical circuit during an overload or short circuit.

    • MCB is a type of circuit breaker that is commonly used in residential and commercial buildings.

    • It is designed to protect electrical circuits from damage caused by overloading or short circuits.

    • MCBs are available in different current ratings and can be easily replac...

  • Answered by AI
  • Q4. What is motor ?
  • Ans. 

    A motor is a device that converts electrical energy into mechanical energy to produce motion.

    • Motors are used in various applications such as electric vehicles, industrial machinery, and household appliances.

    • There are different types of motors such as DC motors, AC motors, stepper motors, and servo motors.

    • The basic principle of a motor is the interaction between a magnetic field and an electric current.

    • Examples of motor...

  • Answered by AI
  • Q5. What is current transformer?
  • Ans. 

    A current transformer is a device that measures the current flowing in a circuit by producing a proportional current in its secondary winding.

    • Consists of a primary winding and a secondary winding

    • Primary winding is connected in series with the circuit carrying the current to be measured

    • Secondary winding is connected to a measuring instrument or protective relay

    • Produces a current in the secondary winding that is proporti...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Now I am from powergrid substation of odisha project I am attended of interview of Tata motor private limited after one years becaise the apprtentic traning will be decleare.

I applied via Referral and was interviewed before Jan 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. My name is prem Singh

Interview Preparation Tips

Interview preparation tips for other job seekers - communication.
Dress for the job or company.
Listen

I applied via Campus Placement and was interviewed before Aug 2021. There were 4 interview rounds.

Interview Preparation Tips

Interview preparation tips for other job seekers - you should prepare answers for the question according to your branch paper. All question were asked from my subject paper of all semester. You must be able to communicate properly with interviewer.

I applied via Other and was interviewed in Aug 2020. There were 4 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. What is cycle time, tackt time, SBP, Indent, 7qc tools
  • Ans. 

    Cycle time, Takt time, SBP, Indent, 7QC tools are important concepts in production engineering.

    • Cycle time is the time taken to complete one cycle of an operation.

    • Takt time is the time taken to produce one unit of a product to meet customer demand.

    • SBP stands for Standardized work, Built-in quality, and Process improvement.

    • Indent is a document used to order materials or services from suppliers.

    • 7QC tools are a set of qual...

  • Answered by AI
  • Q2. Whats is FOC, FRDD, FRDS
  • Ans. 

    FOC stands for Field Oriented Control, FRDD stands for Frequency Response Double Differentiation, and FRDS stands for Frequency Response Double Summation.

    • FOC is a control technique used in AC motor control systems to achieve high performance.

    • FRDD is a mathematical technique used to analyze the frequency response of a system.

    • FRDS is a mathematical technique used to analyze the frequency response of a system by summing t...

  • Answered by AI
  • Q3. What is poke yoke
  • Ans. 

    Poke yoke is a Japanese term for mistake-proofing. It is a technique used to prevent errors in manufacturing processes.

    • Poke yoke involves designing a process or product in a way that makes it impossible to make a mistake.

    • It can be achieved through the use of sensors, alarms, or physical barriers.

    • Examples of poke yoke include car keys that can only be removed when the car is in park, or a phone charger that can only be ...

  • Answered by AI
  • Q4. Types of audit
  • Ans. 

    Types of audit include internal, external, financial, operational, and compliance audits.

    • Internal audit: conducted by company employees to evaluate internal controls and processes

    • External audit: conducted by independent auditors to provide an objective assessment of financial statements

    • Financial audit: focuses on financial statements and accounting practices

    • Operational audit: evaluates the efficiency and effectiveness ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be bold

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Jun 2023. There was 1 interview round.

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't get panic during interview be confident and give straight forward answers
Interview experience
3
Average
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed in Jan 2023. There were 2 interview rounds.

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jul 2023. There were 3 interview rounds.

Interview Preparation Tips

Interview preparation tips for other job seekers - Nothing
Contribute & help others!
anonymous
You can choose to be anonymous

Suzuki Interview FAQs

How many rounds are there in Suzuki Manager Learning & Development interview?
Suzuki interview process usually has 1 rounds. The most common rounds in the Suzuki interview process are HR.

Recently Viewed

LIST OF COMPANIES

Infinite Computer Solutions

Locations

SALARIES

Reverie Language Technologies

SALARIES

Reverie Language Technologies

COMPANY BENEFITS

Reverie Language Technologies

No Benefits

SALARIES

Reverie Language Technologies

REVIEWS

Hyundai Motor India Engineering

No Reviews

JOBS

Reverie Language Technologies

No Jobs

SALARIES

Epaxes Industrial Automation

REVIEWS

Infinite Computer Solutions

No Reviews

SALARIES

Epaxes Industrial Automation

Tell us how to improve this page.

Suzuki Manager Learning & Development Interview Process

based on 1 interview

Interview experience

1
  
Bad
View more

Interview Questions from Similar Companies

Tata Motors Interview Questions
4.2
 • 995 Interviews
Maruti Suzuki Interview Questions
4.2
 • 586 Interviews
Hero MotoCorp Interview Questions
4.1
 • 333 Interviews
TVS Motor Interview Questions
4.0
 • 312 Interviews
Bajaj Auto Interview Questions
3.9
 • 267 Interviews
Ashok Leyland Interview Questions
4.1
 • 239 Interviews
Royal Enfield Interview Questions
4.2
 • 152 Interviews
Ford Motor Interview Questions
4.4
 • 145 Interviews
View all
Junior Manager
80 salaries
unlock blur

₹5.1 L/yr - ₹9 L/yr

Area Service Manager
73 salaries
unlock blur

₹8.5 L/yr - ₹13 L/yr

Area Sales Manager
69 salaries
unlock blur

₹7.2 L/yr - ₹12.5 L/yr

Assistant Manager
62 salaries
unlock blur

₹5.6 L/yr - ₹13 L/yr

Senior Executive
61 salaries
unlock blur

₹3.6 L/yr - ₹7.5 L/yr

Explore more salaries
Compare Suzuki with

Honda

4.2
Compare

Yamaha Motor

4.1
Compare

India Kawasaki Motors Pvt. Ltd.

3.8
Compare

TVS Motor

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview